Comparison of thin epitaxial film silicon photovoltaics fabricated on monocrystalline and polycrystalline seed layers on glass

We fabricate thin epitaxial crystal silicon solar cells on display glass and fused silica substrates overcoated with a silicon seed layer. To confirm the quality of hot‐wire chemical vapor deposition epitaxy, we grow a 2‐µm‐thick absorber on a (100) monocrystalline Si layer transfer seed on display glass and achieve 6.5% efficiency with an open circuit voltage (V_OC) of 586 mV without light‐trapping features. This device enables the evaluation of seed layers on display glass. Using polycrystalline seeds formed from amorphous silicon by laser‐induced mixed phase solidification (MPS) and electron beam crystallization, we demonstrate 2.9%, 476 mV (MPS) and 4.1%, 551 mV (electron beam crystallization) solar cells. Grain boundaries likely limit the solar cell grown on the MPS seed layer, and we establish an upper bound for the grain boundary recombination velocity (S_GB) of 1.6x10⁴ cm/s. Copyright © 2014 John Wiley & Sons, Ltd.     

Nongeminate and Geminate Recombination in PTB7:PCBM Solar Cells

A combination of transient photovoltage (TPV), voltage dependent charge extraction (CE), and time delayed collection field (TDCF) measurements is applied to poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b']dithiophene‐2,6‐diyl] [3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl] thieno[3,4‐b]thiophenediyl]] (PTB7):[6,6]‐phenyl‐C71‐butyric acid (PC₇₁BM) bulk heterojunction solar cells to analyze the limitations of photovoltaic performance. Devices are processed from pure chlorobenzene (CB) solution and a subset is optimized with 1,8‐diiodooctane (DIO) as co‐solvent. The dramatic changes in device performance are discussed with respect to the dominating loss processes. While in the devices processed from CB solution severe geminate and nongeminate recombination is observed, the use of DIO facilitates efficient polaron pair dissociation and minimizes geminate recombination. Thus, from the determined charge carrier decay rate under open circuit conditions and the voltage dependent charge carrier densities n(V), the nongeminate loss current J_loss of the samples with DIO alone enables the reconstruction of the current/voltage (j/V) characteristics across the whole operational voltage range. Geminate and nongeminate losses are considered to describe the j/V response of cells prepared without additive, but lead to a clearly overestimated device performance. The deviation between measured and reconstructed j/V characteristics is attributed to trapped charges in isolated domains of pure fullerene phases.     

Reconfigurable Anisotropic Coatings via Magnetic Field‐Directed Assembly and Translocation of Locking Magnetic Chains

A method for the generation of remotely reconfigurable anisotropic coatings is developed. To form these coatings, locking magnetic nanoparticles (LMNPs) made of a superparamagnetic core and a two‐component polymer shell are employed. Two different polymers form phase‐separated coaxial shells. The outer shell provides repulsive interactions between the LMNPs while the inner shell exerts attractive forces between the particles. Applying a non‐uniform magnetic field, one gathers the particles together, pushing them to come in contact when the internal shells could effectively hold the particles together. When the magnetic field is turned off, the particles remain locked due to these strong interactions between internal shells. The shells are thus made stimuli‐responsive, so this locking can be made reversible and the chains can be disintegrated on demand. In a non‐uniform magnetic field, the assembled chains translocate, bind to the solid substrate and form anisotropic coatings with a “locked” anisotropic structure. The coatings can be constructed, aligned, realigned, degraded, and generated again on demand by changing the magnetic field and particle environment. The mechanism of the coating formation is explained using experimental observations and a theoretical model.     

Monte Carlo cluster refinement for noise robust image segmentation

This paper explores a stochastic approach to refining clustering results for data with spatial-feature context such as images under the presence of noise. We formulate the clustering problem as a maximum a posteriori (MAP) problem, and refine clustering results using importance-weighted Monte Carlo posterior estimates based on between-neighborhood error statistics to account for local spatial-feature context within a global framework. This cluster refinement approach is non-iterative and can be integrated with existing clustering methods to achieve improved clustering performance for image segmentation under high noise scenarios. Experiments on synthetic gray-level images, real-world natural images, and real-world satellite synthetic aperture radar imagery illustrate the proposed method’s potential for improving clustering performance of existing clustering algorithms for image segmentation under high noise situations.     

晶圆边缘的检测

随着特征尺寸的缩小,晶圆表面任何一部分都不允许闲置不用,器件越发地靠近边缘,因此对于晶圆的检查不能再忽视边缘。现有的检查平台必须升级以面对这种挑战。     

Suspended channel MEMS fabrication process for advanced device design and bio-analytical functionalization

This paper reports a simple and novel process that allows the fabrication of suspended channel MEMS devices. Two basic types of suspended structures were fabricated using the new process, and a possible functionalization mechanism for bio-analytical detection and sensing using spotting and capillary action was successfully tested.Possible uses of the fabricated structures are described, as specific existing types of biochemical MEMS sensors.     

Computation of diffusion function measures in q-space using magnetic resonance hybrid diffusion imaging

The distribution of water diffusion in biological tissues may be estimated by a 3-D Fourier transform (FT) of diffusion-weighted measurements in q-space. In this study, methods for estimating diffusion spectrum measures (the zero-displacement probability, the mean-squared displacement, and the orientation distribution function) directly from the q-space signals are described. These methods were evaluated using both computer simulations and hybrid diffusion imaging (HYDI) measurements on a human brain. The HYDI method obtains diffusion-weighted measurements on concentric spheres in q-space. Monte Carlo computer simulations were performed to investigate effects of noise, q-space truncation, and sampling interval on the measures. This new direct computation approach reduces HYDI data processing time and image artifacts arising from 3-D FT and regridding interpolation. In addition, it is less sensitive to the noise and q-space truncation effects than conventional approach. Although this study focused on data using the HYDI scheme, this computation approach may be applied to other diffusion sampling schemes including Cartesian diffusion spectrum imaging.     

A Hybrid AlGaInAs–Silicon Evanescent Amplifier

We report a hybrid AlGaInAs-silicon evanescent amplifier incorporating a silicon waveguide with a III-V gain medium. The optical mode of the hybrid amplifier is mostly confined to the silicon waveguide and evanescently coupled to the AlGaInAs quantum-well (QW) region where optical gain is provided by electrical current injection. These two different material systems are bonded by low-temperature oxygen plasma assisted wafer bonding at 300 degC. The fabricated device shows 13 dB of maximum chip gain with 11 dBm of output saturation power. Evanescent coupling allows a lower active region confinement factor to provide a higher saturation output power than amplifiers with centered QWs, which is important for applications that require linear amplification     

A new system for computer-aided preoperative planning and intraoperative navigation during corrective jaw surgery.

A new system for computer-aided corrective surgery of the jaws has been developed and introduced clinically. It combines three-dimensional (3-D) surgical planning with conventional dental occlusion planning. The developed software allows simulating the surgical correction on virtual 3-D models of the facial skeleton generated from computed tomography (CT) scans. Surgery planning and simulation include dynamic cephalometry, semi-automatic mirroring, interactive cutting of bone and segment repositioning. By coupling the software with a tracking system and with the help of a special registration procedure, we are able to acquire dental occlusion plans from plaster model mounts. Upon completion of the surgical plan, the setup is used to manufacture positioning splints for intraoperative guidance. The system provides further intraoperative assistance with the help of a display showing jaw positions and 3-D positioning guides updated in real time during the surgical procedure. The proposed approach offers the advantages of 3-D visualization and tracking technology without sacrificing long-proven cast-based techniques for dental occlusion evaluation. The system has been applied on one patient. Throughout this procedure, we have experienced improved assessment of pathology, increased precision, and augmented control.