Synthesis of amphiphilic (meth)acrylates with oligo(ethylene glycol) and (or) oligo(propylene glycol) blocks by the esterification of (meth)acrylic acid

Thermoresponsive PEG-based (PEG stands polyethylene glycol) polymers are unique for use in medicine because of their low toxicity, good biocompatibility and biodegradability, but usually more hydrophobic and more toxic comonomers are used to adjust lower critical solution temperature (LCST). A convenient way to overcome this problem and to finely tune LCST is to use alkoxy oligo(ethylene glycol)- or alkoxy oligo(propylene glycol) (meth)acrylates as starting comonomers. Here we report on the conditions for the simple and affordable synthesis of methoxy oligo(propylene glycol) (meth)acrylate- and methoxy oligo(propylene glycol)-block-oligo(ethylene glycol) (meth)acrylate-based macromonomers with high yields (80%–98.7%) by the acid-catalyzed esterification of (meth)acrylic acid with alkoxy oligo(alkylene glycols) containing oligo(ethylene glycol) (OEG) and/or oligo(propylene glycol) (OPG) blocks. p-Toluene sulphonic acid (pTSA), alkyl(C₁₂–C₁₄)benzene sulfonic acid (ABSA) and H₂SO₄ were used as catalysts. It has been shown that pTSA and ABSA are practically the same in catalytic activity and are superior to sulfuric acid. The reaction orders with respect to catalyst was found to be close to 1 in all cases. It has been shown that the reaction is actually insensitive to the lengths of OEG and OPG blocks, as well as to the structure of the terminal alkyl group, while the esterification of acrylic acid (AA) proceeds much faster compared to methacrylic acid (MAA) one under the same conditions. The influence of temperature on the equilibrium conversions of alcohols was determined, which were found to be 89%–93% for the esterification of AA and 61%–86% for MAA in the temperature range of 60–120°C. A further increase in conversion was achieved by introducing an azeotropic agent (toluene), its optimal concentration was found to be 10%–15%.     

Monitoring the curing processes of epoxy oligomers with partially substituted polyethoxymetallosiloxanes by IR spectroscopy and thermomechanical analysis

In this work, the curing of «ED-20» epoxy resin with partially siloxy-substituted aluminum, iron, and zirconium siloxanes that we obtained previously was studied. The initial content of a metallosiloxane in the compositions was 5–50 wt% with respect to the resin. In all the cases, thermal curing was used to obtain a series of samples in the form of solid homogeneous materials. The fact of the epoxy ring opening in the resin was confirmed by IR spectroscopy. The catalytic properties of the metal atom in a metallosiloxane were found to affect the curing process. The samples demonstrate rather a high resistance to thermooxidative destruction, and in most cases, their glass transition temperatures are lower than those obtained upon standard curing of «ED-20» resin with triethylenetetramine. Partially siloxy-substituted metalloalkoxysiloxanes can be efficient agents for curing and formation of a hybrid material based on epoxy resins.     

Sorption of U(VI) onto Layered Double Hydroxides of Mg and Al with β-Cyclodextrin from Aqueous Solutions

Theoretical Foundations of Chemical Engineering - The possibility of removing U(VI) from aqueous solutions using layered double hydroxides of Mg and Al, which contain β-cyclodextrin...     

Influence of the Workpiece Stiffness on the Electromagnetic Sheet Metal Forming Process into Dies

Electromagnetic sheet metal forming is a high speed forming process using pulsed magnetic fields to form metals with high electrical conductivity such as aluminum. Thereby, workpiece velocities of more than 300 m/s are achievable, which can cause difficulties when forming into a die. The kinetic energy, which is related to the workpiece velocity, must be dissipated in a short time slot when the workpiece hits the die; otherwise undesired effects, for example rebound can occur. One possibility to handle this shortcoming is to locally increase the stiffness of the workpiece. A modal analysis is carried out in order to determine the stiffness of specific regions of the workpiece so that an estimation concerning the feasibility of the desired geometry is possible in advance without doing cost and time consuming experiments. Thereby, the desired geometry of the workpiece will be fractionized in significant sectors. This approach has to define the internal force variables acting on the cutting edge, which are required to constrain the numerical model. Finally, a method will be developed with the objective of calculating the stiffness of each sector. The numerical results will be verified by experiments. This article was presented at Materials Science & Technology 2006, Innovations in Metal Forming symposium held in Cincinnati, OH, October 15-19, 2006.     

Polishing and buffing: Theory and practice

There are many other aspects of buffing and polishing than these briefly discussed here. Though this very important contributor to the metal-finishing industry is still a great deal more an art than a science, basic engineering principles can be applied. With the proper melding of buff and compound, applied in a controlled fashion, optimum finish and maximum economy can be achieved.     

Knowledge and Belief: Some Clarifications

The notions of knowledge and belief play an important role in philosophy. Unfortunately, the literature is not very consistent about defining these notions. Is belief more fundamental than knowledge or is it the other way around? Many accounts rely on the widely accepted strategy of appealing to the intuition of the reader. Such an argumentative methodology is fundamentally flawed because it lets the problems of common sense reasoning in through the front door. Instead, I suggest that philosophical arguments should be based on formal-computational models to (a) reduce the ambiguities and uncertainties that come with intuitive arguments and reasoning, and (b) capture the dynamic nature of many philosophical concepts. I present a model of knowledge and belief that lends itself to being implemented on computers. Its purpose is to resolve terminological confusion in favor of a more transparent account. The position I defend is an antirealist naturalized one: knowledge is best conceived as arising from experience, and is fundamental to belief.     

“From microtiter plates to droplets” tools for micro-fluidic droplet processing

Droplet-based microfluidic allows high throughput experimentation in with low volume droplets. Essential fluidic process steps are on the one hand the proper control of the droplet composition and on the other hand the droplet processing, manipulation and storage. Beside integrated fluidic chips, standard PTFE-tubings and fluid connectors can be used in combination with appropriate pumps to realize almost all necessary fluidic processes. The segmented flow technique usually operates with droplets of about 100–500 nL volume. These droplets are embedded in an immiscible fluid and confined by channel walls. For the integration of segmented flow applications in established research workflows—which are usually base on microtiter plates—robotic interface tools for parallel/serial and serial/parallel transfer operations are necessary. Especially dose–response experiments are well suited for the segmented flow technique. We developed different transfer tools including an automated “gradient take-up tool” for the generation of segment sequences with gradually changing composition of the individual droplets. The general working principles are introduced and the fluidic characterizations are given. As exemplary application for a dose–response experiment the inhibitory effect of antibiotic tetracycline on Escherichia coli bacteria cultivated inside nanoliter droplets was investigated.