Towards a Mobile Code Management Environment for Complex,Real-Time,Distributed Systems

We present a novel mobile code management environment,currently under design and development. Our design employs anopen architecture, suitable for ``plug-and-play' with COTS andother groups' tools. While we have studied new algorithms, costand objective functions, and other fundamental issues, the maincontribution of this experimental research work is in the environmentitself. It should be noted that networked platforms, such asthe World Wide Web, are inherently not suitable for traditional,predictable real-time applications. Thus, real-time concernsnecessarily need to be blended with others concerns, and thetarget applications, making use of our environment, will toobe a blend of partially hard real-time and partially (or mostly)soft-real- time ones. The prototype environment will thereforesupport performance-based analysis and management focusing notonly on predictability but also on compilation, efficiency, safetyand other tradeoffs. We have selected the Java language and itsbytecode format as a representation for mobile code as well asa language for our implementation.     

An accurate approximation for the highly efficient sampling of polar scattering angle of electron elastic single-scattering events

In single-event Monte Carlo electron transport simulations, elastic scattering events dominate the changes in electron trajectories due to collisions. Classically, the polar scattering angle due to an elastic collision can be sampled efficiently from the screened Rutherford cross section. However, the screened Rutherford cross section fails for both high Z materials and when the incident electron energy becomes too low. Alternatively, improved simulation accuracy for electrons in all energy ranges and through all materials may be obtained by sampling directly from differential data derived from partial-wave-expansion method (PWEM) calculations based on theoretical atomic potential models. While sampling directly from wave calculations will yield simulation results to the best known physical accuracy, it comes at the cost of simulation time. This is due to a sampling process that is typically more involved when compared with using the screened Rutherford cross section. In this work we present a relationship capable of reproducing the moments of the differential cross section derived from PWEM calculations, resulting in good preservation of forward and backscattering peaks. The relationship is directly invertible and is as easily sampled as the Rutherford cross section. Most important, the data presented in this paper in combination with this relationship produce Monte Carlo simulation results which are comparable with those using the exact differential cross section from PWEM calculations for elements Z = 1 to 96 and for incident electron energies from 300,000 down to 50 eV.     

A discriminative learning framework with pairwise constraints for video object classification

To deal with the problem of insufficient labeled data in video object classification, one solution is to utilize additional pairwise constraints that indicate the relationship between two examples, i.e., whether these examples belong to the same class or not. In this paper, we propose a discriminative learning approach which can incorporate pairwise constraints into a conventional margin-based learning framework. Different from previous work that usually attempts to learn better distance metrics or estimate the underlying data distribution, the proposed approach can directly model the decision boundary and, thus, require fewer model assumptions. Moreover, the proposed approach can handle both labeled data and pairwise constraints in a unified framework. In this work, we investigate two families of pairwise loss functions, namely, convex and nonconvex pairwise loss functions, and then derive three pairwise learning algorithms by plugging in the hinge loss and the logistic loss functions. The proposed learning algorithms were evaluated using a people identification task on two surveillance video data sets. The experiments demonstrated that the proposed pairwise learning algorithms considerably outperform the baseline classifiers using only labeled data and two other pairwise learning algorithms with the same amount of pairwise constraints.     

Stability of edible oils and fats to fluorescent light irradiation

Butter, butterfat, and corn, coconut, rapeseed, and soybean oils were exposed to 500 ft-c of fluorescent light at varying time-temperature conditions. Oxidation rates were measured by the peroxide values. Vitamin A and β-carotene content of butterfat were estimated. The effect of wavelength on the relative rates of oxidation was determined. The light transmitting properties of the samples at 15 and 30 C over a spectral range of 380–750 nm were measured. It was observed that there was no increase in oxidation rate when the light was switched off. The stability of the oils as shown by the oxidation rates did not correlate well with the ratios of C18:2 to C18:1 or C18:3 to C18:2 nor with the degree of unsaturation. Increase in temperature alone had minimal effect; however, in the presence of light the rate of oxidation increased considerably with a corresponding decrease in the content of Vitamin A and β-carotene. β-Carotene provided strong protective properties. After the photobleaching of β-carotene in butterfat, there was a rapid increase in peroxide values. With coconut oil, the oxidation rate was greater at 15 C than at 30 C due to greater light absorption at 15 C over the entire spectrum. The rate of oxidation decreased at higher wavelengths, and this effect was more pronounced in the vegetable oils than in butterfat, where the β-carotene was considered to serve as a filter for light of low wavelength. Presented at the AOCS meeting, Dallas, April 1975.     

A combined dislocation—cohesive zone model for fracture in a confined ductile layer

The collective dislocation behavior near a crack tip in a ductile layer sandwiched between two brittle solids is analyzed via two-dimensional dislocation dynamics (DD) simulations that incorporate a cohesive zone (CZ) model. The cohesive crack tip is treated as part of a much larger finite crack confined in the ductile layer. The underlying boundary value problem is formulated with a set of boundary integral equations and numerically evaluated with a collocation method. The fracture energy of the layered composite material is shown to be strongly correlated with the layer thickness and is directly influenced by the cohesive strength of the ductile layer (Hsia KJ et al. (1994) J Mech Phys Solids 6 877–896).     

Effects of Ti on N distribution and diffusion in FeTiN thin films

We studied the distribution and diffusion of N atoms in FeTiN single-layer and bilayer thin films by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). We found that in as-deposited films N atoms are first absorbed by Ti atoms, the rest being dissolved into FeTi lattices. Ti not only directly absorbs N by chemical bonding, but also decreases the energy of the N atoms that are dissolved into FeTi lattices. The diffusion study of N atoms in single layer and bilayer films showed that although the presence of Ti stabilized the /spl alpha/ phase of FeTi lattices during 200/spl deg/C annealing, the diffusion length of dissolved N in FeTi (Ti/spl les/8 at.%) lattices was still comparable to the diffusion length of N in pure Fe. Thus, the addition of a small amount of Ti in /spl alpha/-Fe lattice can not completely stabilize N atoms in the film, and the induced magnetic anisotropy of the films can still be unstable, although the /spl alpha/ phase of FeTiN is stabilized by the addition of Ti. The distribution of N atoms in bilayer films can be fitted by a simple enthalpy model.     

Euler Critical Force Calculation for Laced Columns

The paper presents a method of solving the buckling problem of laced column as a statically indeterminate structure without analyzing determinants of high order. The flexural and torsional buckling problems of laced column are reduced to the two-point boundary value problem for a difference equation system. The value of Euler critical load is determined as a result of analyzing the fourth order determinant for column with any degree of static indeterminacy. The solution is based on the method of initial values. Stability of columns with any types of lattice (crosswise, serpentine, with batten struts); with any number of lattice panels and with variable lattice spacing can be examined by this manner. The analogy between the flexural and torsional buckling of the laced column is established. It enables one to use the same relations for consideration of both kinds of buckling. The obtained numerical results show that the Euler critical loads calculated by this method can be substantially differed from those based on the approximated Engesser’s approach. A PC program for checking stability of laced column by designer can be developed on the basis of the present method.     

Software release management for component‐based software

Software release management is the process through which software is made available to and obtained by its users. Until now, this process has been relatively straightforward. However, the emergence of component‐based software is complicating software release management. Increasingly, software is constructed via the assembly of pre‐existing, independently produced, and independently released components. Both developers and users of such software are affected by these complications. Developers need to accurately document the complex and changing dependencies among the components constituting the software. Users must be involved in locating, retrieving, and assembling components in order to appropriately bring the software into their particular environment. In this paper, we introduce the problem of release management for component‐based software and discuss SRM, a prototype software release management tool we have developed that supports both developers and users in the software release management process. Copyright © 2002 John Wiley & Sons, Ltd.