Local Accumulation of Lymphocytes in the Intima of Human Aorta Is Associated with Giant Multinucleated Endothelial Cells: Possible Explanation for Mosaicism of Atherosclerosis

Distribution of different types of atherosclerotic lesions in the arterial wall is not diffuse, but is characterized by mosaicism. The causes of such distribution remain to be established. At the early stages of atherogenesis, low-density lipoprotein (LDL) particles and immune cells penetrate into the intimal layer of the arterial wall through the endothelium. In adult humans, the luminal surface of the arterial wall is a heterogeneous monolayer of cells with varying morphology including typical endothelial cells (ECs) and multinucleated variant endothelial cells (MVECs). We hypothesized that distribution of MVECs in the endothelial monolayer can be related to the distribution pattern of early atherosclerotic lesions. We obtained en face preparations of intact adult (22–59 years old) aortic wall sections that allowed us to study the endothelial monolayer and the subendothelial layer. We compared the distribution of MVECs in the endothelial monolayer with the localization of early atherosclerotic lesions in the subendothelial layer, which were characterized by lipid accumulation and immune cell recruitment. In primary culture, MVECs demonstrated increased phagocytic activity compared to mononuclear ECs. Moreover, we have shown that unaffected aortic intima contained associates formed as a result of aggregation and/or fusion of LDL particles that are non-randomly distributed. This indicated that MVECs may be involved in the accumulation of LDL in the subendothelial layer through increased transcytosis. Interaction of LDL with subendothelial cells of human aorta in primary culture increased their adhesive properties toward circulating immune cells. Study of unaffected aortic intima revealed non-random distribution of leukocytes in the subendothelial layer and increased localization of CD45+ leukocytes in the subendothelial layer adjacent to MVECs. Together, our observations indicate that MVECs may be responsible for the distribution of atherosclerotic lesions in the arterial wall by participating in LDL internalization and immune cell recruitment.     

Influence of composition and microstructure on transparency and diffusivity in ion-exchangeable spinel glass-ceramics

Ion-exchangeable, transparent spinel glass-ceramics are presented and discussed here for the first time. To retain transparency with increasing crystallinity, spinel glass-ceramics must have uniform crystallization of small (~9 nm) crystallites, not large spherulitic structures comprised of small crystallites. To obtain such a uniform microstructure, the amount of total nucleating agents (ZrO₂ + TiO₂) in the precursor glass composition must be greater than 5 mol%. With small changes in composition and significant differences in microstructure, the demarcation between transparent and opaque glass-ceramics is distinct as is the decrease in K diffusivity during ion-exchange from the transparent (14.7 microns²/h) to the opaque (11.2 microns²/h) compositions. Understanding how to retain transparency during ceramming and increase diffusivity during chemical strengthening is critical in designing materials for many real-world applications. Ion-exchangeable, transparent spinel glass-ceramics are presented and discussed here for the first time. To retain transparency with increasing crystallinity, spinel glass-ceramics must have uniform crystallization of small (~9 nm) crystallites, not large spherulitic structures comprised of small crystallites. To obtain such a uniform microstructure, the amount of total nucleating agents (ZrO₂ + TiO₂) in the precursor glass composition must be greater than 5 mol%. With small changes in composition and significant differences in microstructure, the demarcation between transparent and opaque glass-ceramics is distinct as is the decrease in K diffusivity during ion-exchange from the transparent (14.7 microns²/h) to the opaque (11.2 microns²/h) compositions. Understanding how to retain transparency during ceramming and increase diffusivity during chemical strengthening is critical in designing materials for many real-world applications.     

Distribution of Mixing Efficiency in a Split-Cylinder Gas-Lift Bioreactor with Immobilized Yarrowia Lipolytica Cells Used for Olive Oil Mill Wastewater Treatment

The distribution of mixing in a split-cylinder gas-lift bioreactor has been investigated for suspensions of immobilized Yarrowia lipolytica cells with particles diameter varying between 3 and 4.2 mm. The results indicated important variation of mixing time on the height of riser or downcomer, as well as different behavior of suspensions flows in these two regions. Therefore, for the riser, the mixing efficiency increases from its bottom to the top, allowing the biocatalyst particles with intermediate size (3.6-mm diameter) reaching the most intense circulation of suspension. The analysis of the suspension flow in the downcomer region revealed that the intermediate positions are associated with the highest mixing mainly for the largest immobilized yeast particles (4.2-mm diameter). In both cases, the influence of aeration on turbulence extent is positive only for air superficial velocity up to 1.05–1.35 × 10^?3 m/s, the magnitude of this effect being correlated with the biocatalyst size and position on the riser or downcomer. By means of the experimental data, mathematical correlations for mixing time have been proposed for each circulation region, taking into consideration both the operational parameters and the distance from the bioreactor bottom. These equations offer a good concordance with the experiment, the average deviation being of 5.82% for the riser and 6.06% for the downcomer zone.     

Thermodynamic and Structural Properties of Sodium Lithium Niobate Solid Solutions

Thermodynamics of the Na_1−xLi _x NbO₃ system is investigated by high-temperature drop-solution calorimetry in molten 3Na₂O–4MoO₃ solvent at 973 K. Standard molar enthalpies of formation are derived. The estimated heats of transition between hypothetical and stable structures, lithium niobate and perovskite for NaNbO₃ and vice versa for LiNbO₃ are −6 kJ/mol and −10 kJ/mol, respectively. X-ray diffraction studies at room temperature showed for 0 ≤ x ≤ 0.14 there are three phases based on different ordering of the perovskite type lattice: orthorhombic with a quadrupled reduced perovskite cell at 0 ≤ x ≤ 0.02, orthorhombic with a doubled reduced perovskite cell at 0.015 ≤ x ≤ 0.14, and rhombohedral at 0.08 ≤ x ≤ 0.13. There are two two-phase (morphotropic) regions with coexistence of the two orthorhombic phases at 0.015 ≤ x ≤ 0.02 and with the second orthorhombic phase coexisting with the rhombohedral phase at 0.08 ≤ x ≤ 0.13. A reproducible anomaly in specific heat at ∼600 K, not reported previously, has been observed in pure NaNbO₃. Heat-capacity measurements confirm a phase transition at 553 K for 0.07 ≤ x ≤ 0.09. With increasing lithium concentration, a gradual disappearance of high-temperature phase transitions associated with tilting of oxygen octahedra has been observed.     

Improvement of actuation performance of dielectric elastomers by barium titanate and carbon black fillers

Dielectric elastomers are promising materials for actuators resembling human muscle. Among elastomers, acrylic rubbers (ACM) have shown good actuation performance but its use is limited by the high operating voltages required. The present work demonstrates that simultaneous incorporation of nanostructured carbon black and dielectric fillers offers an increase in a dielectric permittivity and a suitable modulus of the elastomers matrix, enabling an improved electro‐mechanical actuation performance at low voltages. By the use of reinforcing carbon black and barium titanate in an acrylic elastomer matrix a sixfold increase in the dielectric permittivity was realized. A fine tuning of the actuation stress and, consequently, actuation strain can be done by a judicial selection of the different filler concentrations in the soft rubber matrix. Finally, a synergistic effect of the fillers was observed in the improved actuation performance of the developed materials. This work may pave the way to design dielectric elastomers for actuator fabrication. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44116.     

Mercury in the Arctic atmosphere: an analysis of eight years of measurements of GEM at Alert (Canada) and a comparison with observations at Amderma (Russia) and Kuujjuarapik (Canada)

Eight years of gaseous elemental mercury (GEM) concentration measurements from Alert, Nunavut, Canada (between 1995 and 2002) is presented. The annual time series shows a distinct repeating seasonal pattern with an overall annual median concentration for this time period of 1.58 (S.D.=0.04 ng m(-3)). Strong seasonal variation was observed throughout the years with springtime displaying strong variability in the GEM and overall lower median concentrations due to the so-called mercury depletion events (MDEs). Summer concentrations are higher than the annual average and show a decrease in variability. Fall and winter concentrations are distributed around the annual median concentrations and show little variability. The relationship between the springtime depression and the summer increase shows a change in the behaviour of mercury between 1995 and 2002. Preliminary results suggest that during this period an increasing amount of the mercury lost from the atmosphere in the spring is not returned to atmosphere in summer. A comparison of GEM concentration data from three sites--Alert (Canada), Amderma (Russia) and Kuujjuarapik (Canada)--demonstrated similar monthly distribution of GEM between Alert and Amderma, with the latter not showing as high summer concentrations. Monthly distribution of GEM at Kuujjuarapik varied considerably from the other two sites. MDEs were found to occur at each site in the spring yet displayed different characteristics. MDEs appear to start at Alert shortly after polar sunrise but in Amderma their initiation is delayed approximately 2 months following polar sunrise. MDEs occur in Kuujjuarapik in the springtime despite an incomplete development of the polar day-night cycle. In spring, as soon as air temperature attained temperatures consistently above 0 degrees C, MDEs ended immediately at all three sites. Continued studies into MDEs are warranted, but clearly an important component of future studies must focus on the origins of the variation of GEM behaviour at different sites.     

Application of β-Sitosterol + γ-Oryzanol-Structured Organogel as Migration Barrier in Filled Chocolate Products

Oil migration in filled pralines is a phenomenon that is highly correlated with the occurrence of chocolate bloom. In this study the potential to suppress or prevent oil migration by incorporation of sterol/sterolster-structured organogels was evaluated. Different quantities, 2.5 or 14% (w/w), of gel with structurant levels of either 10 or 25% (w/w) were studied in a layered model system. The gel was either a part of the nougat or of the chocolate phase, or as a separate layer. Samples were monitored regularly for a period of 24 weeks at storage temperatures of 10, 18 and 28 °C. The amount of migrated oil was determined via DSC analysis of a surface sample. The results indicate that, despite the additional oil brought into the system via the oleogel, the level of oil found in the chocolate layer is reduced through the presence of the gel. In particular, the three-layer system and gelled chocolate appear to be promising routes to either suppress oil migration or improve nutritional profiles by incorporation of liquid oils.     

Recent Developments in the Field of Thermal Barrier Coatings

Conventional thermal barrier coating (TBC) systems consist of a duplex structure with a metallic bondcoat and a ceramic, heat-isolative topcoat. Several recent research activities are concentrating on developing improved bondcoat or topcoat materials; for the topcoat especially, those with reduced thermal conductivity are investigated. Using advanced topcoat materials, the ceramic coating can be further divided into layers with different functions. One example is the double-layer system in which conventional yttria-stabilized zirconia (YSZ) is used as bottom and new materials such as pyrochlores or perovskites are used as topcoat layers. These systems demonstrated an improved temperature capability compared to standard YSZ. In addition, new functions are introduced within the TBCs. These can be sensorial properties that can be used for an improved temperature control or even for monitoring remaining lifetime. Further increased application temperatures will also lead to efforts for a further improvement of the reflectivity of the coatings to reduce the radiative heat transfer through the TBC.     

Health assessment of artisanal gold miners in Indonesia

Small scale miners use mercury to extract gold from ore in many countries. An environmental and health assessment was performed in Indonesia in two regions, Galangan in Central Kalimantan and Talawaan in Northern Sulawesi. The environmental assessment showed severe mercury contamination of the sediments, and increased mercury levels in local fish. For the health investigation 281 volunteers were recruited and examined by a standardized questionnaire, a neurological examination and neuro-psychological tests. A medical score was used consisting of significant factors of mercury intoxication. Mercury exposed workers showed typical symptoms of mercury intoxication, such as movement disorders (ataxia, tremor, dysdiadochokinesia, etc.). Blood, urine and hair samples were taken from any participant and analyzed for mercury. The mercury concentration in the biomonitors was high, partly extreme high in the working population, increased in the population living in the same habitat and low in the control group. By a standard protocol which includes a combination of threshold values of mercury in the biomonitors and a medical sum score the diagnosis of chronic mercury intoxication was made for highly burdened workers (amalgam smelters) in 55% in Sulawesi and in 62% in Kalimantan. Less exposed mineral processors and the general population in the mining areas were also intoxicated to a high percentage.     

Fabrication of Si–C–N compounds in silicon carbide by ion implantation

The chemical variation and depth profile of silicon carbide implanted with nitrogen and overgrown with epitaxial layer has been studied using X-ray photoelectron spectroscopy (XPS). The results of this study have been supplemented by transmission electron microscopy (TEM) imaging and electron energy loss-spectroscopy (EELS) in an attempt to correlate the chemical and structural information. Our results indicate that the nitrogen implantation into silicon carbide results in the formation of the Si–C–N layer. XPS revealed significant change in the bonding structure and chemical states in the implanted region. XPS results can be interpreted in terms of the silicon nitride and silicon carbonitride nanocrystals formation in the implanted region which is supported by the electron microscopy and spectroscopy results.