Simulation of vertical merged MOS elements with optical power supply

Functional optoelectronic vertical merged MOS (OVMMOS) elements with optical power supply increasing the packaging density for advanced high-speed low-voltage low-power deep-submicron ULSI are considered. Two types of new OVVMOS logical elements are proposed, analyzed and simulated. The simple reduced but adequate numerical electrical-optical model for the OVMMOS is formulated. Low-voltage low-power OVMMOS with combined channels for electrons and holes to increase integration level are simulated using two-dimensional (2D)-numerical device simulators. The problems of low light power operations and optimizations of OVMMOS elements are investigated using 2D simulators.     

Large‐Area Fabrication of Periodic Arrays of Nanoholes in Metal Films and Their Application in Biosensing and Plasmonic‐Enhanced Photovoltaics

Plasmonics is a fast developing research area with a great potential for practical applications. However, the implementation of plasmonic devices requires low cost methodologies for the fabrication of organized metallic nanostructures that covers a relative large area (～1 cm²). Here the patterning of periodic arrays of nanoholes (PANHs) in gold films by using a combination of interference lithography, metal deposition, and lift off is reported. The setup allows the fabrication of periodic nanostructures with hole diameters ranging from 110 to 1000 nm, for 450 and 1800 nm of periodicity, respectively. The large areas plasmonic substrates consist of 2 cm × 2 cm gold films homogeneously covered by nanoholes and gold films patterned with a regular microarray of 200 μm diameter circular patches of PANHs. The microarray format is used for surface plasmon resonance (SPR) imaging and its potential for applications in multiplex biosensing is demonstrated. The gold films homogeneously covered by nanoholes are useful as electrodes in a thin layer organic photovoltaic. This is first example of a large area plasmonic solar cell with organized nanostructures. The fabrication approach reported here is a good candidate for the industrial‐scale production of metallic substrates for plasmonic applications in photovoltaics and biosensing.     

Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.     

Cracks in glass under triaxial conditions

This experimental work documents the mechanical evolution of synthetic glass (SON68) under compressive triaxial stresses (hydrostatic and deviatoric conditions). The experimental setup enabled to monitor and vary independently confining pressure (range: [0, 50] MPa) and axial stress (up to 680 MPa) at room temperature. An optimized set of sensors allowed us to perform measurements during the experiments of: (i) axial and radial deformation, (ii) P- and S-elastic wave velocities, and (iii) acoustic emissions. In addition, in some samples, initial crack densities up to a value of 0.24 were introduced by thermal cracking. We compare the original synthetic glass data set to results obtained in the same experimental conditions on thermally cracked glass and on a basaltic rock with similar petrophysical properties (porosity, chemistry).Stress-strain data depict original linear elastic glass properties even up to an axial stress of 680 MPa (under 15 MPa confining pressure). A strong strength decrease (370 MPa at 15 MPa confining pressure) is observed for thermally cracked samples. Elastic wave velocity data highlight that cracks are mostly closed at a confining pressure of ∼30 MPa. The basaltic rock seems to correspond to an intermediate state between an original and a thermally treated glass. In all samples, damage was accompanied by dynamic crack propagation, producing large magnitude acoustic emissions. Thanks to a continuous recorder, we could locate a number of acoustic emissions in order to image the microcracking pattern evolution prior to failure.     

Micro- and Nano-scale Measurement of the Thermophysical Properties of Polymeric Materials Using Atomic Force Microscopy

To realize the benefits and optimize the performance of micro- and nano-structured materials and thin films, designers need to understand and thus be able to characterize their thermal, thermophysical, and thermomechanical properties on appropriate length scales. This paper describes the determination of glass-transition temperatures of polymers on the micro-scale, obtained from contact force–distance curves for poly(methyl methacrylate) and poly(vinyl acetate) measured using an atomic force microscope (AFM). Measurements were made using a standard AFM tip where thin films were heated using a temperature controlled hot stage and by using a scanning thermal microscopy (SThM) probe. The latter was used either with the hot stage or with the SThM probe providing a localized heating source via Joule heating. Differences in the glass-transition temperature measured using the hot stage and Joule heating were apparent and considered to be due to heat transfer effects between the probe, specimen, and surroundings. Gradients of force–distance curves, pull-off and snap-in forces, and adhesion energy were obtained. The results suggest that the onset of changes in the material’s mechanical properties at the glass transition was found to be dependent on the mechanical property measured, with pull-off force values changing at lower temperatures than the snap-in force and adhesion energy.     

Hydroxyapatite deposition study through polymeric process on commercially pure Ti surfaces modified by laser beam irradiation

Many techniques have been used to coat metallic substrate with bioceramics. The aim of this study was to study the physical-chemical characteristics of polyvinylidene fluoride (α-PVDF)/hydroxyapatite (HA) composite coating, obtained by casting method, on commercially pure titanium (α-CP Ti) substrate surface modified by laser beam irradiation. The preparation of coating was done for mixing α-PVDF pellets shape dissolved in dimethylacetamide (DMA) with HA/DMA emulsion. The mixture was poured onto the α-CP Ti sample and left to dry in an oven. CP Ti plates were coated with α-PVDF/HA composite film, in proportions of 100/00 and 60/40 in weight, and characterized by particle size analysis, scanning electron microscopy, energy dispersive spectroscopy (EDS), X-ray diffractometry, thickness measurement and contact angle. Uniform coating with a small thickness variation along the coated surface was successfully obtained.     

Design of reconfigurable machining lines: A novel comprehensive optimisation method

We present a novel comprehensive optimization model for designing reconfigurable machining lines. Due to the proposed fine mathematical modelling, it is possible to optimize simultaneously the whole set of machines and machining modules as well as their cutting parameters, their configuration that will be used for processing of each part and part position at each machine. The experimental results show that the proposed optimization approach substantially outperforms the existing heuristic design method and therefore it can be used by the designers in order to reduce the total system cost and improve the efficiency of reconfigurable machining lines.     

Role of Tyrosine Kinase Syk in Thrombus Stabilisation at High Shear

Understanding the pathways involved in the formation and stability of the core and shell regions of a platelet-rich arterial thrombus may result in new ways to treat arterial thrombosis. The distinguishing feature between these two regions is the absence of fibrin in the shell which indicates that in vitro flow-based assays over thrombogenic surfaces, in the absence of coagulation, can be used to resemble this region. In this study, we have investigated the contribution of Syk tyrosine kinase in the stability of platelet aggregates (or thrombi) formed on collagen or atherosclerotic plaque homogenate at arterial shear (1000 s⁻¹). We show that post-perfusion of the Syk inhibitor PRT-060318 over preformed thrombi on both surfaces enhances thrombus breakdown and platelet detachment. The resulting loss of thrombus stability led to a reduction in thrombus contractile score which could be detected as early as 3 min after perfusion of the Syk inhibitor. A similar loss of thrombus stability was observed with ticagrelor and indomethacin, inhibitors of platelet adenosine diphosphate (ADP) receptor and thromboxane A₂ (TxA₂), respectively, and in the presence of the Src inhibitor, dasatinib. In contrast, the Btk inhibitor, ibrutinib, causes only a minor decrease in thrombus contractile score. Weak thrombus breakdown is also seen with the blocking GPVI nanobody, Nb21, which indicates, at best, a minor contribution of collagen to the stability of the platelet aggregate. These results show that Syk regulates thrombus stability in the absence of fibrin in human platelets under flow and provide evidence that this involves pathways additional to activation of GPVI by collagen.     

Synthesis and Characterization of Ti-Nb2O5 Catalysts for Discoloration Reaction of Bromophenol Blue and Indigo Carmine Dyes

Topics in Catalysis - This work investigated the photodegradation of bromophenol blue (BPB) and indigo carmine (IC) dye under UV–Visible light using pure oxides of titanium and niobium, as...     

Label-Free Study of the Global Cell Behavior during Exposure to Environmental Radiofrequency Fields in the Presence or Absence of Pro-Apoptotic or Pro-Autophagic Treatments

It remains controversial whether exposure to environmental radiofrequency signals (RF) impacts cell status or response to cellular stress such as apoptosis or autophagy. We used two label-free techniques, cellular impedancemetry and Digital Holographic Microscopy (DHM), to assess the overall cellular response during RF exposure alone, or during co-exposure to RF and chemical treatments known to induce either apoptosis or autophagy. Two human cell lines (SH-SY5Y and HCT116) and two cultures of primary rat cortex cells (astrocytes and co-culture of neurons and glial cells) were exposed to RF using an 1800 MHz carrier wave modulated with various environmental signals (GSM: Global System for Mobile Communications, 2G signal), UMTS (Universal Mobile Telecommunications System, 3G signal), LTE (Long-Term Evolution, 4G signal, and Wi-Fi) or unmodulated RF (continuous wave, CW). The specific absorption rates (S.A.R.) used were 1.5 and 6 W/kg during DHM experiments and ranged from 5 to 24 W/kg during the recording of cellular impedance. Cells were continuously exposed for three to five consecutive days while the temporal phenotypic signature of cells behavior was recorded at constant temperature. Statistical analysis of the results does not indicate that RF-EMF exposure impacted the global behavior of healthy, apoptotic, or autophagic cells, even at S.A.R. levels higher than the guidelines, provided that the temperature was kept constant.