Hydrolytic Depolymerization of PET in a Microwave Reactor

Recycling of PET was examined using hydrolytic depolymerization in an alkaline solution under microwave irradiation. The reaction was carried out in a sealed microwave reactor in which the pressure and temperature were controlled and recorded. The main products were the monomers TPA and EG. The effect of reaction temperature, time, amount of PET and alkaline concentration on the degree of PET depolymerization and TPA recovery was investigated. Microwave irradiation was found to reduce the time needed to achieve a specific degradation of PET significantly, with almost complete depolymerization occurring in 30 min at 180 °C and only 46 W of microwave power. Using a phase transfer catalyst (TOMAB) resulted in the same amount of unreacted PET but at significantly lower depolymerization temperatures.

     

Data validation platform for the sophisticated monitoring and communication of the energy technology sector

It has very often been stated that the difficulty and complexity of achieving green energy targets in the European Union (EU) will require strengthened measures to promote implementation of New Energy Technologies, Energy End-use Efficiency, as well as measures to support the related energy Research and Technology Development (RTD). Often forgotten is the fact, that most of all, a European-wide co-ordinated forum is needed to continuously develop and sophisticate the monitoring and methodology results, bringing together specialised statisticians, energy researchers and experts on energy socio-economics. The aim of this paper is to present the Scientific Reference System (SRS) Scorecard; a data validation platform for the sophisticated monitoring and communication of the energy technology sector. In this respect, the concept of the SRS scorecard system will be laid out, the parameters and the scoring criteria will be explained as well as the assessment system so as to provide the interested reader with the basis needed to understand the technology evaluation examples provided, as well as its critical analysis.     

Assessing the determinants of local acceptability of wind-farm investment: A choice experiment in the Greek Aegean Islands

This paper aims at analysing the factors, which motivate communities to resist the installation of wind farms in their vicinity. To this end, the choice experiment methodology was employed in communities in two Greek Aegean Islands to assess the determinants of preferences towards different wind-farm projects. Unlike other studies, the willingness to accept welfare measure was adopted. The results of our analysis show that the conservation status of the area where the wind farms are to be installed, along with the governance characteristics of the planning procedure are the most important determinants of local community welfare in relation to wind farms. In contrast to other studies, we find that the physical attributes of wind farms appear to be of less relative importance from a local community welfare point of view. Implications for the EU's future energy policy are drawn.     

Highly Active Metastable Ruthenium Nanoparticles for Hydrogen Production through the Catalytic Hydrolysis of Ammonia Borane

Late transition metal nanoparticles (NPs) with a favorably high surface area to volume ratio have garnered much interest for catalytic applications. Yet, these NPs are prone to aggregation in solution, which has been mitigated through attachment of surface ligands, additives or supports; unfortunately, protective ligands can severely reduce the effective surface area on the NPs available for catalyzing chemical transformations. The preparation of ‘metastable’ NPs can readily address these challenges. We report herein the first synthesis of monodisperse metastable ruthenium nanoparticles (RuNPs), having sub 5 nm size and an fcc structure, in aqueous media at room temperature, which can be stored for a period of at least 8 months. The RuNPs can subsequently be used for the catalytic, quantitative hydrolysis of ammonia‐borane (AB) yielding hydrogen gas with 21.8 turnovers per min at 25 °C. The high surface area available for hydrolysis of AB on the metastable RuNPs translated to an E_a of 27.5 kJ mol^‐1, which is notably lower than previously reported values for RuNP based catalysts.     

Electrochemical oxidation of stabilized landfill leachate on DSA electrodes

The electrochemical oxidation of stabilized landfill leachate with 2960 mg L(-1) chemical oxygen demand (COD) over a Ti/IrO(2)-RuO(2) anode was investigated in the presence of HClO(4) as the supporting electrolyte. Emphasis was given on the effect of electrolysis time (up to 240 min) and temperature (30, 60 and 80°C), current density (8, 16 and 32 mA cm(-2)), initial effluent's pH (0.25, 3, 5 and 6), HClO(4) concentration (0.25 and 1M) and the addition of NaCl (20 and 100mM) or Na(2)SO(4) (20mM) as source of extra electrogenerated oxidants on performance; the latter was evaluated regarding COD, total carbon (TC), total phenols (TPh) and color removal. Moreover, the anode was studied by scanning electron microscopy and cyclic voltammetry. The main parameters affecting the process were the effluent's pH and the addition of salts. Treatment for 240 min at 32 mA cm(-2) current density, 80°C and the pH adjusted from its inherent value of 0.25 (i.e. after the addition of HClO(4)) to 3 yielded 90% COD, 65% TC and complete color and TPh removal at an electricity consumption of 35 kWh kg(-1) COD removed. Comparable performance (i.e. 75% COD reduction) could be achieved without pH adjustment but with the addition of 100mM NaCl consuming 20 kWh kg(-1) COD removed.     

The E3 architecture: enabling future cellular networks with cognitive and self‐x capabilities

Future mobile networks are expected to be complex heterogeneous systems. On the one hand this will enable users to take advantage of a number of different access technologies. On the other hand it will seriously affect network management procedures since more extensive operations and decisions will have to be dealt with. To tackle these challenges a number of new dynamic mechanisms need to be designed. It is imperative that certain network management tasks have to be performed without human intervention to reduce the OPEX costs and achieve faster responses in different events. To achieve this goal, the introduction of self‐x functionalities, combined with cognitive mechanisms and the ability to reconfigure network entities and terminals, is required. Moreover, the introduction of a new pilot channel needs to be considered to assist the terminals in selecting the most suitable radio access technology according to their requirements. We present the functional architecture of an evolved network that was designed in the context of the EU‐funded IP project ‘E³: End‐to‐End Efficiency’. This architecture aims to enhance existing procedures usually performed in traditional operation and maintenance systems (e.g. spectrum management, network planning, configuration actions). We explain the rationale of our design and provide specific examples to illustrate the role of the different functional entities and their interfaces. A considerable part of this architecture has recently been approved as a feasibility study by the ETSI Committee Reconfigurable Radio System. Copyright © 2010 John Wiley & Sons, Ltd.     

Modulation of intravariceal pressure with pentoxifylline: a possible new approach in the treatment of portal hypertension

OBJECTIVE: In this study the effect of the hemorheological agent pentoxifylline on the pressure of esophageal varices was investigated in portal hypertensive cirrhotic patients. METHODS: Intravariceal pressure was measured endoscopically using the direct puncture technique in 20 patients. Measurements were obtained under baseline conditions and 30 min after double-blind administration of pentoxifylline (1.4 mg/kg BW, n = 10 patients) or an identical volume of NaCl 0.9% solution (n = 10 patients). RESULTS: Under baseline conditions, intravariceal pressure was similar in pentoxifylline and placebo groups (17.3+/-5.5 mm Hg vs 18.8+/-4.6 mm Hg, respectively; p = N.S.). Placebo administration had no significant effect on intravariceal pressure (18.8+/-4.6 mm Hg vs 18.3+/-4.1 mm Hg; p = N.S.). In contrast, pentoxifylline caused a highly significant reduction of intravariceal pressure, (from 17.3+/-5.5 mm Hg to 11.4+/-5.9 mm Hg; p = 0.0001), the overall mean reduction being 36.1+/-14.1% mm Hg. CONCLUSIONS: We concluded that pentoxifylline, by reducing blood flow viscosity, caused a significant decrease in variceal pressure in patients suffering from portal hypertension.     

Heterogeneous Wafer-Scale Circuit Architectures

This article has presented circuit architectures that allow for the 3D integration and on-wafer packaging through the concept of an Si interposer. The presented 3D integration schemes have allowed for the design and fabrication of a fully integrated receiver that performs at 10 GHz. High-Q passives and 3D interconnects allow for the design of low-cost, high-density circuits that also exhibit very high performance