Grafting of titanium dioxide microspheres with a temperature‐responsive polymer via surface‐initiated atom transfer radical polymerization without the use of silane coupling agents

Titania microspheres with narrow size distribution and diameters of about 1 µm were prepared and subsequently functionalized using surface‐initiated atom transfer radical polymerization (ATRP) of N‐isopropylacrylamide. The ATRP initiator was immobilized on the particle surface via acylation of surface hydroxyl groups with α‐bromoisobutyryl bromide. Subsequently, an established ATRP reaction system was used for the preparation of titania surface‐grafted poly(N‐isopropylacrylamide) (PNiPAAm). Characterization was performed with electron microscopies, X‐ray diffraction, infrared spectroscopy and dynamic light scattering. It was found that the particle size in aqueous dispersions changed reversibly with temperature as expected for a shell of PNiPAAm, a polymer with a lower critical solution temperature at 32 °C. This confirmed the successful preparation of functional, stimuli‐responsive TiO₂ microparticles via a straightforward controlled surface‐initiated polymerization method.     

Monte Carlo uncertainty quantification of the effective delayed neutron fraction

The applicability of Monte Carlo techniques, namely the Monte Carlo sensitivity method and the random-sampling method, for uncertainty quantification of the effective delayed neutron fraction β_eff is investigated using the continuous-energy Monte Carlo transport code, MCNP, from the perspective of statistical convergence issues. This study focuses on the nuclear data as one of the major sources of β_eff uncertainty. For validation of the calculated β_eff, a critical configuration of the VENUS-F zero-power reactor was used. It is demonstrated that Chiba's modified k-ratio method is superior to Bretscher's prompt k-ratio method in terms of reducing the statistical uncertainty in calculating not only β_eff but also its sensitivities and the uncertainty due to nuclear data. From this result and a comparison of uncertainties obtained by the Monte Carlo sensitivity method and the random-sampling method, it is shown that the Monte Carlo sensitivity method using Chiba's modified k-ratio method is the most practical for uncertainty quantification of β_eff. Finally, total β_eff uncertainty due to nuclear data for the VENUS-F critical configuration is determined to be approximately 2.7% with JENDL-4.0u, which is dominated by the delayed neutron yield of ²³⁵U.     

Hemi- and Homozygous Loss-of-Function Mutations in DSG2 (Desmoglein-2) Cause Recessive Arrhythmogenic Cardiomyopathy with an Early Onset

About 50% of patients with arrhythmogenic cardiomyopathy (ACM) carry a pathogenic or likely pathogenic mutation in the desmosomal genes. However, there is a significant number of patients without positive familial anamnesis. Therefore, the molecular reasons for ACM in these patients are frequently unknown and a genetic contribution might be underestimated. Here, we used a next-generation sequencing (NGS) approach and in addition single nucleotide polymor-phism (SNP) arrays for the genetic analysis of two independent index patients without familial medical history. Of note, this genetic strategy revealed a homozygous splice site mutation (DSG2–c.378+1G>T) in the first patient and a nonsense mutation (DSG2–p.L772X) in combination with a large deletion in DSG2 in the second one. In conclusion, a recessive inheritance pattern is likely for both cases, which might contribute to the hidden medical history in both families. This is the first report about these novel loss-of-function mutations in DSG2 that have not been previously identi-fied. Therefore, we suggest performing deep genetic analyses using NGS in combination with SNP arrays also for ACM index patients without obvious familial medical history. In the future, this finding might has relevance for the genetic counseling of similar cases.     

SAT-Solving in Practice, with a Tutorial Example from Supervisory Control

Satisfiability solving, the problem of deciding whether the variables of a propositional formula can be assigned in such a way that the formula evaluates to true, is one of the classic problems in computer science. It is of theoretical interest because it is the canonical NP-complete problem. It is of practical interest because modern SAT-solvers can be used to solve many important and practical problems. In this tutorial paper, we show briefly how such SAT-solvers are implemented, and point to some typical applications of them. Our aim is to provide sufficient information (much of it through the reference list) to kick-start researchers from new fields wishing to apply SAT-solvers to their problems. Supervisory control theory originated within the control community and is a framework for reasoning about a plant to be controlled and a specification that the closed-loop system must fulfil. This paper aims to bridge the gap between the computer science community and the control community by illustrating how SAT-based techniques can be used to solve some supervisory control related problems.     

Yellow–green organic light-emitting diode based on tris(2-methyl-8-quinolinolate) scandium

Efficient yellow–green electroluminescence emission at λ_max = 530 nm with CIE coordinates x = 0.3913, y = 0.4947 was obtained with organic light-emitting devices based on tris(2-methyl-8-quinolinolate) scandium (1). The device with the configuration of indium tin oxide/N,N′-bis(3-methylphenyl)-N,N′-diphenylbenzidine/1/Yb exhibits current efficiency of 3.1 cd/A and power efficiency of 1.8 lm/W at a luminance of 100 cd/m². The DFT calculations demonstrate that structural changes of the scandium complex 1 influence the electroluminescence spectrum, the better agreement with experimental data being achieved when monodentate ligands are taken into consideration.     

Modulation of Aβ42 Aggregation Kinetics and Pathway by Low-Molecular-Weight Inhibitors

The aggregation of amyloid-β 42 (Aβ42) is directly related to the pathogenesis of Alzheimer's disease. Here, we have investigated the early stages of the aggregation process, during which most of the cytotoxic species are formed. Aβ42 aggregation kinetics, characterized by the quantification of Aβ42 monomer consumption, were tracked by real-time solution NMR spectroscopy (RT-NMR) allowing the impact that low-molecular-weight (LMW) inhibitors and modulators exert on the aggregation process to be analysed. Distinct differences in the Aβ42 kinetic profiles were apparent and were further investigated kinetically and structurally by using thioflavin T (ThT) and transmission electron microscopy (TEM), respectively. LMW inhibitors were shown to have a differential impact on early-state aggregation. Insight provided here could direct future therapeutic design based on kinetic profiling of the process of fibril formation.     

The effect of red pigment on the amyloidization of yeast proteins

The intensity of amyloid-bound thioflavine T fluorescence was studied in crude lysates of yeast strains carrying mutations in the ADE1 or ADE2 genes and accumulating the red pigment (a result of polymerization of aminoimidazoleribotide), and in white isogenic strains--either adenine prototrophs or carrying mutations at the first stages of purine biosynthesis. We found that the red pigment leads to a drop of amyloid content. This result, along with the data on separation of protein polymers of white and red strains in PAGE, suggests that the red pigment inhibits amyloid fibril formation. The differences in transmission of the thioflavine T fluorescence pattern by cytoduction and in blot-hybridization of pellet proteins of red and white [PSI(+) ] strains with Sup35p antibodies confirmed this conclusion. Purified red pigment treatment also led to a decrease of fluorescence intensity of thioflavine T bound to insulin fibrils and to yeast pellet protein aggregates from [PSI(+) ] strains. This suggests red pigment interaction with amyloid fibrils. Comparison of pellet proteins from red and white isogenic strains separated by 2D-electrophoresis followed by MALDI analysis has allowed us to identify 48 pigment-dependent proteins. These proteins mostly belong to functional classes of chaperones and proteins involved in glucose metabolism, closely corresponding to prion-dependent proteins that we characterized previously. Also present were some proteins involved in stress response and proteolysis. We suppose that the red pigment acts by blocking certain sites on amyloid fibrils that, in some cases, can lead in vivo to interfere with their contacts with chaperones and the generation of prion seeds.     

Range-only measurements based target following for wheeled mobile robots

We consider the problem of navigation and guidance of a wheeled mobile robot towards a maneuvering target based on the measurements concerning only the distance from the robot to the target. We propose a sliding mode controller that drives the robot to the predefined distance from the target and makes the robot follow the target at this distance. Mathematically rigorous proof of convergence and stability of the proposed guidance law is presented. Simulation results confirm the applicability and performance of the proposed guidance approach.     

Geometry of the Structure of Amorphous Metal Evaporated Under Microgravity Condition

In Ref. 1 the principle of the adequacy between the stability of the structure of amorphous metals and the completeness of the set of configuration vacancies has been introduced. The principle of adequacy is valid for all the methods of amorphous solid metals production described in Ref. 2. This principle is the basis of the proposed novel technology of production of stable amorphous films sputtered on the cold substrate. The technology proposed takes into account the geometry of microgravity in the film structure and thus excludes the effect of the film burst crystallization.     

Thermally Stable, Latent Olefin Metathesis Catalysts

Highly thermally stable N-aryl,N-alkyl N-heterocyclic carbene (NHC) ruthenium catalysts were designed and synthesized for latent olefin metathesis. These catalysts showed excellent latent behavior toward metathesis reactions, whereby the complexes were inactive at ambient temperature and initiated at elevated temperatures, a challenging property to achieve with second generation catalysts. A sterically hindered N-tert-butyl substituent on the NHC ligand of the ruthenium complex was found to induce latent behavior toward cross-metathesis reactions, and exchange of the chloride ligands for iodide ligands was necessary to attain latent behavior during ring-opening metathesis polymerization (ROMP). Iodide-based catalysts showed no reactivity toward ROMP of norbornene-derived monomers at 25 °C, and upon heating to 85 °C gave complete conversion of monomer to polymer in less than 2 hours. All of the complexes were very stable to air, moisture, and elevated temperatures up to at least 90 °C, and exhibited a long catalyst lifetime in solution at elevated temperatures.