Aluminiumhydroxychlorid-Flockungsmittel aus dem Kupferrecycling aus Abfällen der Leiterplattenproduktion

The production of printed circuit boards using the printing process produces considerable quantities of copper-containing etching solutions. The copper is recovered from the ammoniacal etching baths by cementation with aluminum waste at ≥ 99 % Cu yield rates. Instead of the usual landfilling, the aluminum-containing solution is processed into a coagulant which can be used in the treatment of mining tailings and wastewater. The aluminum oxychloride produced in this way was characterized in detail and its effectiveness as a flocculant for a finely dispersed system (kaolin suspension) was investigated and confirmed in a jar test.     

Antimicrobial and Amyloidogenic Activity of Peptides. Can Antimicrobial Peptides Be Used against SARS-CoV-2?

At present, much attention is paid to the use of antimicrobial peptides (AMPs) of natural and artificial origin to combat pathogens. AMPs have several points that determine their biological activity. We analyzed the structural properties of AMPs, as well as described their mechanism of action and impact on pathogenic bacteria and viruses. Recently published data on the development of new AMP drugs based on a combination of molecular design and genetic engineering approaches are presented. In this article, we have focused on information on the amyloidogenic properties of AMP. This review examines AMP development strategies from the perspective of the current high prevalence of antibiotic-resistant bacteria, and the potential prospects and challenges of using AMPs against infection caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2).     

Dynamic modeling of a multiple hearth furnace for kaolin calcination

A dynamic model of a multiple hearth kaolin calciner has been developed and is presented in this article. This model describes the physical‐chemical phenomena taking place in the six furnace parts: the solid phase, gas phase, walls, cooling air, rabble arms, and the central shaft. The solid phase movement, in particular, is described by a novel mixing model. The mixing model divides the solid bed in a hearth into volumes and the distribution of their contents, after one full central shaft rotation, is identified by the pilot experiments. First, the model is validated by the industrial data, and then the dynamics of the multiple hearth furnace is studied by introducing step changes to the three manipulated variables: the feed rate, and the gas, and air flows supplied. The responses of the gas phase temperature and solid bed component profiles are analysed and the results are discussed. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3683–3698, 2015     

Investigating the Role of Conformational Effects on Laccase Stability and Hyperactivation under Stress Conditions

Fungal laccase from Steccherinum ochraceum 1833 displays remarkable stability under different harsh conditions: organic/buffer mixtures, thermal treatment, and microwave radiation. The behavior is particularly significant in the light of the sharp inactivation observed for two different fungal laccases. Laccase from S. ochraceum 1833 also displays hyperactivation under mild thermal treatment (60 °C). Molecular dynamics simulations at 80 °C explained how this laccase retains the geometry of the electron transfer pathway, thereby assuring electron transfer through the copper ions and thus maintaining its catalytic activity at high temperature. Spectroscopic studies revealed that the thermal activation corresponds to specific conformational changes in the protein. The results indicate that this laccase is potentially applicable under denaturing conditions that might be beneficial for the biotransformation of recalcitrant substrates.     

Design of novel FN3 domains with high stability by a consensus sequence approach

The use of consensus design to produce stable proteins has been applied to numerous structures and classes of proteins. Here, we describe the engineering of novel FN3 domains from two different proteins, namely human fibronectin and human tenascin-C, as potential alternative scaffold biotherapeutics. The resulting FN3 domains were found to be robustly expressed in Escherichia coli, soluble and highly stable, with melting temperatures of 89 and 78°C, respectively. X-ray crystallography was used to confirm that the consensus approach led to a structure consistent with the FN3 design despite having only low-sequence identity to natural FN3 domains. The ability of the Tenascin consensus domain to withstand mutations in the loop regions connecting the β-strands was investigated using alanine scanning mutagenesis demonstrating the potential for randomization in these regions. Finally, rational design was used to produce point mutations that significantly increase the stability of one of the consensus domains. Together our data suggest that consensus FN3 domains have potential utility as alternative scaffold therapeutics.     

Exchange reactions control for selective separation of glyoxylic acid in technological mixtures of glyoxal oxidation

Separation of glyoxylic acid from unpurified multicomponent technological mixtures, resulting in the process of direct oxidation of glyoxal, and preparation of sodium glyoxylate are developed. The mixtures are treated with an optimal amount of CaCO_3, which has to be prespecified by acidic–basic titration of the technological mixtures. Both separation of glyoxylic acid and preparation of sodium glyoxylate take place owing to ionic exchange reactions: calcium glyoxylate is easily converted into glyoxylic acid by action of oxalic acid. Reaction with Na₂CO₃ leads to the formation of sodium glyoxylate.     

Influence of Landau level mixing on the properties of elementary excitations in graphene in strong magnetic field

ABSTRACT: Massless Dirac electrons in graphene fill Landau levels with energies scaled as square roots of their numbers. Coulomb interaction between electrons leads to mixing of different Landau levels. The relative strength of this interaction depends only on dielectric susceptibility of surrounding medium and can be large in suspended graphene. We consider influence of Landau level mixing on the properties of magnetoexcitons and magnetoplasmons-elementary electron-hole excitations in graphene in quantizing magnetic field. We show that, at small enough background dielectric screening, the mixing leads to very essential change of magnetoexciton and magnetoplasmon dispersion laws in comparison with the lowest Landau level approximation.PACS: 73.22.Pr; 71.35.Ji; 73.43.Mp; 71.70.Gm.     

Yellow–green organic light-emitting diode based on tris(2-methyl-8-quinolinolate) scandium

Efficient yellow–green electroluminescence emission at λ_max = 530 nm with CIE coordinates x = 0.3913, y = 0.4947 was obtained with organic light-emitting devices based on tris(2-methyl-8-quinolinolate) scandium (1). The device with the configuration of indium tin oxide/N,N′-bis(3-methylphenyl)-N,N′-diphenylbenzidine/1/Yb exhibits current efficiency of 3.1 cd/A and power efficiency of 1.8 lm/W at a luminance of 100 cd/m². The DFT calculations demonstrate that structural changes of the scandium complex 1 influence the electroluminescence spectrum, the better agreement with experimental data being achieved when monodentate ligands are taken into consideration.     

Direct <Emphasis Type="SmallCaps">d</Emphasis>-Glucose Oxidation over Noble Metal Nanoparticles Introduced on Polymer and Inorganic Supports

In the present work, nanocatalysts prepared on inorganic supports (zeolites) were investigated in d-glucose oxidation and compared to systems supported on polymer (hypercrosslinked polystyrene (HPS)) previously described. Catalytic activities and selectivities were measured under various reaction conditions. The selectivity of d-glucose oxidation and activity of both Pd-containing zeolites and HPS-Ru were similar (99.7% and TOF 0.013–0.014 mol/(mol Me s)). Physicochemical analysis X-ray photoelectron spectroscopy, liquid nitrogen physisorption, diffuse reflectance infrared Fourier transform spectroscopy of adsorbed CO for metal sites evaluation, CD₃CN for acid sites evaluation showed that Pd species were in oxidic form, while Ru species were in oxidic and reduced form. The catalytic activity decreased when acidic sites were present in Pd-containing zeolites.