Application of substituted N-arylpyrroles in the corrosion protection of aluminium in hydrochloric acid

The inhibiting action of N-arylpyrroles on aluminium in 0.17 mol dm^–3 hydrochloric acid solution, in the temperature range 20–60 °C, was studied using potentiodynamic and electrochemical impedence spectroscopy techniques. The inhibiting efficiency of both investigated compounds 1-(2-fluorophenyl)-2,5-dimethylpyrrole (compound A) and 1-(2-fluorophenyl)-2,5-dimethylpyrrole-3-carbaldehyde (compound B) slightly increases with increasing temperature of the corrosive solution. Inhibitor adsorption on the elecrode surface decreases the apparent activation energy of the hydrogen evolution reaction. Compound A follows the Temkin adsorption isotherm, while its carbaldehyde derivative follows the Langmuir isotherm. The results of the apparent energy of activation and the standard free energy of adsorption point to stronger chemisorption of the compound A. However, due to additional condensation of molecules with carbaldehyde groups on the electrode surface, the carbaldehyde derivative exhibits even better inhibiting efficiency than compound A. The kinetic corrosion parameters, analysed in terms of the impedance data, show a satisfactory agreement with those obtained by the potentiodynamic method.     

Reactive energy measurement using frequency controlled analog-to-pulse-rate converter

Contents This paper analyzes a problem of phase shifting and deseribes a novel method for electronic reactive energy measurement. The proposed measurement structure, composed of an integrator as a phase shifting circuit and a frequency controlled analog-to-pulse-rate converter, provides for the measurement completely in accordance with IEC definition of reactive energy, which is performed with simple but high performance metering device.

---

Die Blindverbrauchsmessung anhand eines netzsynchronisierten Analog-Frequenz-Wandlers

Übersicht In diesem Artikel wird das Problem der Phasenverschiebung analysiert und eine neue Meßmethode für elektronische Blindverbrauschsmessung aufgezeigt. Die vorgeschlagene Strucktur, bestehend aus einem Integrator als Phasenschieber und netzkontrolliertem Analog-Frequenz-Wandler, ermöglicht die Verwirklichung eines einfachen aber präzisen Elektrizitätszählers zur Messung der Blindenergie, dessen Arbeitsprinzip mit den IEC Empfehlungen vollkommen übereinstimmt.

     

Phase transformation and densification during pressureless sintering of Si3N4 with MgO and Y3Al5O12 additives

The - transformation of Si₃N₄ during liquid-phase sintering appears to be controlled by the growth of the -Si₃N₄ grains in the direction perpendicular to thec-axis in the case of MgO additive. The diffusion through the liquid is the rate-controlling step in the case of the Y₄Al₅O₁₂ additive. The density of the sintered body at the solid skeleton stage was influenced by the change in the - transformation rate and/or by a change of the transformation mechanism. The indirect proportionality between the -phase content in the starting powder and the density at the solid skeleton stage was found. The microstructure of the sintered body is influenced by both the -phase content in the starting powder and the chemical composition of the additive. Fine, uniform microstructure with a high aspect ratio of -grains is obtained, when the -phase content in the starting powder is as small as possible and when the - transformation is controlled by grain growth.     

Prevention of dark-cutting (DFD) beef in penned bulls at the abattoir

There is a large body of evidence indicating that activities associated with regrouping of bulls before slaughter, which leads to physical exhaustion mainly from mounting, are primary factors inducing dark-cutting (DFD) in beef. The aim of this study was to test several methods to control activity when regrouping cannot be avoided. Fifty bulls previously individually tied for at least 16 months were drafted into groups of five animals and released in a pen at the abattoir. After 18 to 22 h they were slaughtered. According to environmental conditions in the pen, the bulls were divided into four groups: Control group (n = 10, no experimentation); Electricity group (n = 10, an electric fence was constructed above the pen so that a mounting bull would receive an electric shock); Darkness group (n = 10, the whole stall was in darkness); and Combination group (n = 20, both treatments, of the electricity and darkness groups were applied). During the first hour of penning the behaviour of the bulls was videorecorded. After slaughter meat quality characteristics were measured. Dark-cutting was found in Control (70%), Electricity (30%) and Darkness (70%) groups, but not in the Combination group (0%). No treatment altered the repertoire of agonistic activity, but under the combined treatments the number of agonistic interactions was significantly lower than in any other group.     

Properties of WN x /GaAs Schottky contacts prepared by ion implantation of nitrogen

The formation of WN _x /GaAs Schottky contacts using selective ion implantation of nitrogen into the sputtered tungsten film has been demonstrated. The contacts were characterized by Auger electron spectroscopy and current-voltage measurements. The composition of WN _x films and the thermal stability of WN _x /GaAs contacts were investigated. Good thermal stability of WN _x /GaAs contacts compared with a W/GaAs contact was observed after capless rapid thermal annealing at 450, 800 and 950°C for 10 s.     

Modal logic as metalogic

The goal of this paper is to show how modal logic may be conceived as recording the derived rules of a logical system in the system itself. This conception of modal logic was propounded by Dana Scott in the early seventies. Here, similar ideas are pursued in a context less classical than Scott's.First a family of propositional logical systems is considered, which is obtained by gradually adding structural rules to a variant of the nonassociative Lambek calculus. In this family one finds systems that correspond to the associative Lambek calculus, linear logic, relevant logics, BCK logic and intuitionistic logic. Above these basic systems, sequent systems parallel to the basic systems are constructed, which formalize various notions of derived rules for the basic systems. The deduction theorem is provable for the basic systems if, and only if, they are at least as strong as systems corresponding to linear logic, or BCK logic, depending on the language, and their deductive metalogic is not stronger than they are.However, though we do not always have the deduction theorem, we may always obtain a modal analogue of the deduction theorem for conservative modal extensions of the basic systems. Modal postulates which are necessary and sufficient for that are postulates of S4 plus modal postulates which mimic structural rules. For example, the modal postulates which Girard has recently considered in linear logic are necessary and sufficient for the modal analogue of the deduction theorem.All this may lead towards results about functional completeness in categories. When functional completeness, which is analogous to the deduction theorem, fails, we may perhaps envisage a modal analogue of functional completeness in a modal category, of which our original category is a full subcategory.     

Photo-Chemically-Deposited and Industrial Cu/ZnO/Al2O3 Catalyst Material Surface Structures During CO2 Hydrogenation to Methanol: EXAFS,XANES and XPS Analyses of Phases After Oxidation,Reduction, and Reaction

Catalysis Letters - Industrial Cu/ZnO/Al2O3 or novel rate catalysts, prepared with a photochemical deposition method, were studied under functional CH3OH synthesis conditions at the set temperature...     

Nature-Inspired Meta-Heuristics on Modern GPUs: State of the Art and Brief Survey of Selected Algorithms

Graphic processing units (GPUs) emerged recently as an exciting new hardware environment for a truly parallel implementation and execution of Nature and Bio-inspired Algorithms with excellent price-to-power ratio. In contrast to common multicore CPUs that contain up to tens of independent cores, the GPUs represent a massively parallel single-instruction multiple-data devices that can nowadays reach peak performance of hundreds and thousands of giga floating-point operations per second. Nature and Bio-inspired Algorithms implement parallel optimization strategies in which a single candidate solution, a group of candidate solutions (population), or multiple populations seek for optimal solution or set of solutions of given problem. Genetic algorithms (GA) constitute a family of traditional and very well-known nature-inspired populational meta-heuristic algorithms that have proved its usefulness on a plethora of tasks through the years. Differential evolution (DE) is another efficient populational meta-heuristic algorithm for real-parameter optimization. Particle swarm optimization (PSO) can be seen as nature-inspired multiagent method in which the interaction of simple independent agents yields intelligent collective behavior. Simulated annealing (SA) is global optimization algorithm which combines statistical mechanics and combinatorial optimization with inspiration in metallurgy. This survey provides a brief overview of the latest state-of-the-art research on the design, implementation, and applications of parallel GA, DE, PSO, and SA-based methods on the GPUs.     

The effect of two-layer cathode on the performance of the direct methanol fuel cell

To reduce the effect of methanol permeated from the anode, the structure of the cathode was modified from a single layer with Pt black catalyst to two-layer with PtRh black and Pt black catalysts, respectively. The current density of the direct methanol fuel cell (DMFC) using the two-layer cathode was improved to 228 mA/cm^-2 compared to that (180 mA/cm^-2) of the DMFC using the single layer cathode at 0.3 V and 303 K. From the cyclic voltammograms (CVs), it is indicated that the amount of adsorbates on the metal catalyst in the two-layer cathode is less than that of adsorbates in the single layer cathode after methanol test. In addition, the adsorbates were removed very rapidly by electrochemical oxidation from the two-layer cathode. It is suggested fromex situ X-ray absorption near edge structure analysis that the d-electron vacancy of Pt atom in the two-layer cathode is not changed by the methanol test. Thus, Pt is not covered with the adsorbates, which agrees well with the results of CV.