Star-shaped hexaaryltriindoles small molecules: Tuning molecular properties towards solution processed organic light emitting devices

We present a series of differently substituted star-shaped hexaaryltriindoles with tunable light-emitting properties. The deep blue emission is unchanged by donor peripheral substituents while an increasing acceptor character produces a reduction of the optical gap, an increased Stokes shift and eventually leads to the appearance of a new electronic level and to the simultaneous deep blue (413 nm) and green (552 nm) emission in solution. Quenching by concentration increases with the acceptor character but is lower as the tendency of these compounds to aggregate is stronger. Solution processed thin films present optical and morphological qualities adequate for device fabrication and similar electronic structure compared to solutions with an emission range from 423 nm up to 657 nm (red), demonstrating the possibility of tuning the energy levels by chemical functionalization. We have fabricated and characterized single-layer solution processed organic light emitting diodes (OLED) to investigate the influence on transport and emission properties of the substituting species. We analyzed the I–V response using a single-carrier numerical model that includes injection barriers and non-uniform electric-field across the layer. As a result, we obtained the electric field dependence of the mobility for each device. Best results are obtained on the most electron rich derivative functionalized with six donor methoxy groups. This material shows the highest emission efficiency in solid state, due to aggregation-induced enhancement, and better transport properties with the highest mobility and a very low turn-on voltage of 2.8 V. The solution processed OLED devices produce stable deep blue (CIE coordinates (0.16, 0.16)) to white (CIE coordinates (0.33, 0.3)) emission with similar luminous efficiencies.     

Bimodal polypropylene through binary metallocene catalytic systems: comparison between hybrid and mixed heterogeneous catalysts

Polypropylene with wider or bimodal molecular weight distribution is required for numerous applications since low molecular weight chains improve processability and high molecular weight fraction is required to get good mechanical properties. There are several routes to achieve a bimodal resin but the use of a binary catalytic system seems to be the most attractive, particularly with metallocenes combination. From a previous work two metallocenes were selected because they lead to polypropylenes with average molecular weights that differ in one order of magnitude. Two types of binary systems have been investigated, hybrid catalysts (two metallocenes loaded on the same support) and physical mixtures (two independent supported metallocenes that are introduced to the reactor and start the polymerization together), using different ratios, i.e., 25–75, 50–50, 75–25, at three reaction temperatures, i.e., 30, 50 and 70 °C. Most of the binary catalytic systems lead to bimodal molecular weight distributions. Polypropylenes produced by mixed catalysts are greatly influenced by the most active catalyst, while in PP coming from hybrid catalysts, as there is a strong interaction between both metallocenes, each one contributes according to its presence in the hybrid catalyst. Therefore, properties of obtained bimodal polypropylenes are quite influenced by the ratio between both metallocenes.     

Analyzing growth and mortality in a subtropical urban forest ecosystem

Information on urban tree growth, mortality and in-growth is currently being used to estimate urban forest structure changes and ecosystem services such as carbon sequestration. This study reports on tree diameter growth and mortality in 65 plots distributed among four land use categories, which were established in 2005/2006 in Gainesville, Florida, USA and were re-measured in 2009. Models for mortality and in-growth models were developed by grouping species into hardwoods and softwoods. Annual change in tree diameter at breast height growth was analyzed using three tree species groups based on potential height and longevity. Additionally, the four most common tree species in the study area were modeled to explore factors affecting tree growth. The average annual mortality rate in the city was 9.97%. Trees located in Institutional land use/land cover (LULC) had the highest annual mortality rate (19.2%/yr), and commercial had the lowest (3.1%/yr). Overall, growth rates for the study area (0.70 cm/yr) and residential LULC (0.80 cm/yr) were comparable to other studies. Growth rates for trees in forested areas were higher (0.56 cm/yr) than those previously reported. Individual species-level growth rates such as those for Juniperus virginiana (1.24 cm/yr) and Quercus virginiana (1.08 cm/yr) were different than other species values reported in other studies. Maintenance activities, site conditions, soil properties, tree characteristics, and LULC significantly influenced urban tree growth, mortality, and in-growth. Results can be used to better understand urban forest ecosystem structure and services in medium sized, subtropical cities and to make better decisions regarding planting and maintenance strategies.     

Management Levers for Product Platforms

Platforming has become an important means of cost-sharing among industrial products. However, many firms face systemic downward pressure on commonality, with the result that many platforms realize less commonality than intended. Past research has hypothesized that divergence is the result of conflicting tensions between product customization/optimization and cost control. This article investigates the control and incentive levers available to platform managers to shape the behavior of the organization when divergence opportunities arise. Management levers are drawn from a series of 12 industrial case studies, stemming from investigations of the causes of divergences. These management levers are categorized as technical levers, financial levers, and organizational levers. This article illustrates each of the management levers with examples from the case studies.     

Proximate Composition and Seed Lipid Components of Sorghum Cultivars from Argentina

Seeds of 11 sorghum cultivars ( Sorghum bicolor ) from Argentina were analysed for proximate composition, fatty acids and sterols. Oil, protein, carbohydrate and ash contents varied between 41 and 66 g kg⁻¹, 111 and 156 g kg⁻¹, 670 and 730 g kg⁻¹ and 13·8 and 20·6 g kg⁻¹ of dry matter, respectively. Fatty acid profiles revealed that the major acids were palmitic (15·1–24·8%), oleic (29·9–41·8%) and linoleic (35·9–51·3%). Unsaponifiable matter was examined for sterols. Sitosterol was the prominent component in all cultivars (43·8–57·9%), followed by campesterol (18·7–29·1%) and stigmasterol (12·4–20·5%).     

Analysis of the Content of Fatty Acid Methyl Esters in Biodiesel by Fourier-Transform Infrared Spectroscopy: Method and Comparison with Gas Chromatography

The increasing importance of sustainability in energy production has led to a global commitment to the use of fuels derived from renewable biological sources, such as biodiesel produced from plant crops or biomass residues, that do not compete with human food for their production. For a biofuel to be considered biodiesel, it must satisfy the specifications described in the UNE 14214, with the UNE-EN 14103 referring to the determination of fatty acid methyl ester content. This standard applies gas chromatography as an analytical technique. Gas chromatography is a widely used technique in the analysis of methyl ester although it has a number of drawbacks such as: long analysis times, a high consumption of high-quality gases and internal standards, does not allow the analysis of different compounds with the same column, etc. From an industrial production point of view, is necessary to know the fatty acid methyl ester content in biodiesel samples quickly. This paper studies the development of an analytical method using Fourier transform infrared spectroscopy (FTIR) as alternative to gas chromatography (GC), since it is a simple, rapid, and precise analytical technique to quantify fatty acid methyl ester content in biofuel samples.     

Electroconductive nylon 6 and copper composites

A study is reported on the effect of the filler size and concentration on the electrical resistivity, density, and hardness of composites made of copper powder embedded in nylon 6 matrix by means of compression molding. The electrical resistivity of the composites is > 10¹¹ ohm·cm unless the metal content reached the percolation threshold, beyond which the resistivity decreased markedly by as much as 10¹². The percolation concentration was found to decrease with a decrease in the average particle diameter. The density of the composites was measured and compared with values calculated assuming different void levels within the samples. However, there is no sharp variation in the density due to the onset of percolation. Furthermore, it is shown that a percolation concentration can be also defined in the hardness/metal concentration curves as the intercept of linear regression curves of the low and high metal content regimes, respectively.