Rapid carbothermic synthesis of silicon carbide nano powders by using microwave heating

This paper reports an improved procedure for synthesis of silicon carbide nanopowders from silica by carbothermic reduction under fast microwave-induced heating. The powders have been prepared by direct solid-state reaction in a 2.45 GHz microwave field in nitrogen atmosphere after 40 h milling. For the first time, the formation of silicon carbide (β-SiC) as a major phase can be achieved at 1200 °C in 5 min of microwave exposure, resulting in nano sized particles ranging from 10 to 40 nm under optimized synthesis condition. The Rietveld quantitative phase-composition analysis confirmed that the major SiC polytype is cubic SiC (β-SiC) with 98.5(4) weight fraction and the remained is minor hexagonal SiC polytypic (α-SiC) phases. Therefore this method is the most efficient one for SiC powder synthesis in terms of energy and time saving as well as preparation of SiC nano powders.     

Quantifying the effects of crack width,tortuosity, and roughness on water permeability of cracked mortars

The existing service-life prediction models rarely account for the effect of cracks on mass transport and durability of concrete. To correct this deficiency, transport in fractured porous media must be studied. The objective of this paper is to quantify the water permeability of localized cracks as a function of crack geometry (i.e., width, tortuosity, and surface roughness). Plain and fiber-reinforced mortar disk specimens were cracked by splitting tension; and the crack profile was digitized by image analysis and translated into crack geometric properties. Crack permeability was measured using a Darcian flow-thru cell. The results show that permeability is a function of crack width square. Crack tortuosity and roughness reduce the permeability by a factor of 4 to 6 below what is predicted by the theory for smooth parallel plate cracks. Although tortuosity and roughness exhibit fractal behavior, their proper measurement is possible and results in correct estimation of crack permeability.     

Bulk synthesis of ZnO nanoparticles by the one-step electromagnetic levitational gas condensation method

The ZnO nanoparticles were synthesized by the one-step electromagnetic levitational gas condensation method with a relatively high production rate. In this method, the vapors ascending from a high temperature levitated Zn droplet were condensed and oxidized by He–0.2Ar and O₂ gas mixtures, respectively, under both atmospheric and reduced pressures. Effects of carrier gas type and temperature, oxygen content, and reactor pressure on the size, size distribution and morphology of the particles were investigated. The particles were characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy methods. The production rate of the crystalline ZnO nanoparticles was estimated as high as 300 g h^?1. The results showed that decreasing the gas temperature and reactor pressure resulted in a smaller particle size and a higher fraction of rod-like nanoparticles.     

The pozzolanic reactivity of monodispersed nanosilica hydrosols and their influence on the hydration characteristics of Portland cement

This study reveals that the nanosilica hydrosols with higher specific surface areas had faster pozzolanic reactivity, especially at early ages; moreover, the results are indicative of the accelerating influence of nanosilicas and silica fume on the hydration of cement. Faster initial and final setting times observed for cement pastes containing nanosilicas are consequence of these mechanisms. However, less hydration degree of cement compared to the plain paste was observed at age of 7 days and after. This can be attributed to the entrapment of some of mix water in the aggregates of nanosilicas formed in cement paste environment, making less water available for the progress of cement hydration. The same mechanism is believed to be responsible for the reduction of flowability of cement pastes.     

Removal of Cadmium from Aqueous Solution by Nano Composites of Bentonite /TiO2 and Bentonite/ZnO Using Photocatalysis Adsorption Process

Silicon - In this study, bentonite/TiO2 and bentonite/ZnO nanoparticles were used for studying the cadmium removal from the aqueous solution. The experiments were done in a batch condition under...     

A model for stress-dependence of apparent permeability in nanopores of shale gas reservoirs

Predicting long-term production from gas shale reservoirs is a challenging task due to changes in effective stress and permeability during gas production. Unlike coal, the variation of sorbing gas permeability with pore pressure in shale does not always feature a biphasic trend under a constant confining pressure. The present contribution demonstrates that the biphasic dependence of permeability on pore pressure depends on a number of physical and geometrical factors, each with a distinct impact on gas permeability. This includes pore size, adsorption isotherm, and the variation of gas viscosity with pore pressure. A single-capillary model is proposed for the apparent permeability of real gas in shale. Results indicate that the biphasic relation between apparent permeability and pore pressure is prevalent when the sorbing gas flows in sufficiently small pores. In addition, the effects of sorption isotherm and internal resistance of nonideal gas to flow cannot be ignored.     

Silica aerogel/epoxy nanocomposites: Mechanical,vibrational, and morphological properties

The present study was an attempt to examine the effects that adding silica aerogel (SA) nanoparticles to epoxy would exert on its mechanical, vibrational, and morphological properties. Neat epoxy was consecutively combined with 1, 2, and 4 wt% of SA nanoparticles. A number of tests of mechanical properties were then performed on the samples, including tests of tensile, bending, compressive, dynamic mechanical thermal, hardness, and Izod impact. Vibration and water uptake tests were also conducted on the samples. The highest modulus and strength values were found in the nanocomposite sample with 4 wt% of SA, and the highest toughness and elongation values were detected in the sample with 1 wt% of SA. Furthermore, adding the SA nanoparticles to the epoxy improved the energy absorption and hardness of the epoxy matrix. The findings from the tests of dynamic mechanical thermal and vibration properties demonstrated that, with an increase in the nanoparticles content in the samples, the values of storage modulus and natural frequency increased while the values of tan δ and damping ratios decreased. A comparison between the values of natural frequency from the vibration test and the values from the Euler–Bernoulli beam theory showed a good agreement between the theoretical and experimental results.     

Human Cellular Retinol Binding Protein II Forms a Domain-Swapped Trimer Representing a Novel Fold and a New Template for Protein Engineering

Domain-swapping is a mechanism for evolving new protein structure from extant scaffolds, and has been an efficient protein-engineering strategy for tailoring functional diversity. However, domain swapping can only be exploited if it can be controlled, especially in cases where various folds can coexist. Herein, we describe the structure of a domain-swapped trimer of the iLBP family member hCRBPII, and suggest a mechanism for domain-swapped trimerization. It is further shown that domain-swapped trimerization can be favored by strategic installation of a disulfide bond, thus demonstrating a strategy for fold control. We further show the domain-swapped trimer to be a useful protein design template by installing a high-affinity metal binding site through the introduction of a single mutation, taking advantage of its threefold symmetry. Together, these studies show how nature can promote oligomerization, stabilize a specific oligomer, and generate new function with minimal changes to the protein sequence.     

Evolving an Accurate Decision Tree-Based Model for Predicting Carbon Dioxide Solubility in Polymers

Solubility is one of the most indispensable physicochemical properties determining the compatibility of components of a blending system. Research has been focused on the solubility of carbon dioxide in polymers as a significant application of green chemistry. To replace costly and time-consuming experiments, a novel solubility prediction model based on a decision tree, called the stochastic gradient boosting algorithm, was proposed to predict CO₂ solubility in 13 different polymers, based on 515 published experimental data lines. The results indicate that the proposed ensemble model is an effective method for predicting the CO₂ solubility in various polymers, with highly satisfactory performance and high efficiency. It produces more accurate outputs than other methods such as machine learning schemes and an equation of state approach.     

Surface modification of multiwalled carbon nanotubes via surface RAFT copolymerization method and capecitabine-loaded anticancer hydrogel for controlled drug delivery in stomach

ABSTRACT

In our work, reversible addition-fragmentation chain transfer (RAFT)/carbon nanotube (CNT)/acrylic acid (AA)/acrylamide (AAm) nanocomposite was synthesized by living radical polymerization. The structure and surface morphology of the synthesized RAFT-CNT-Hydrogel nanocomposites were analyzed by FTIR, ¹HNMR, SEM, TEM, XRD, and TGA/DTG techniques. The results indicated that PAA/AAm chains grafted with CNT by RAFT polymerization. RAFT-CNT-Hydrogel nanocomposites for drug release investigated in different buffers resulted in a strong pH-sensitive behavior. In total, the obtained hydrogel drug-delivery systems are presented a proper effect versus stomach cancer in vitro and in vivo, and it can be used as candidates for controlled release of anticancer drugs in stomach with exalted remedial agents.