A hybrid multi-objective shuffled frog-leaping algorithm for a mixed-model assembly line sequencing problem

In this paper, a mixed-model assembly line (MMAL) sequencing problem is studied. This type of production system is used to manufacture multiple products along a single assembly line while maintaining the least possible inventories. With the growth in customers’ demand diversification, mixed-model assembly lines have gained increasing importance in the field of management. Among the available criteria used to judge a sequence in MMAL, the following three are taken into account: the minimization of total utility work, total production rate variation, and total setup cost. Due to the complexity of the problem, it is very difficult to obtain optimum solution for this kind of problems by means of traditional approaches. Therefore, a hybrid multi-objective algorithm based on shuffled frog-leaping algorithm (SFLA) and bacteria optimization (BO) are deployed. The performance of the proposed hybrid algorithm is then compared with three well-known genetic algorithms, i.e. PS-NC GA, NSGA-II, and SPEA-II. The computational results show that the proposed hybrid algorithm outperforms the existing genetic algorithms, significantly in large-sized problems.     

Critical heat flux prediction by using radial basis function and multilayer perceptron neural networks: A comparison study

Critical heat flux (CHF) is an important parameter for the design of nuclear reactors. Although many experimental and theoretical researches have been performed, there is not a single correlation to predict CHF because it is influenced by many parameters. These parameters are based on fixed inlet, local and fixed outlet conditions. Artificial neural networks (ANNs) have been applied to a wide variety of different areas such as prediction, approximation, modeling and classification. In this study, two types of neural networks, radial basis function (RBF) and multilayer perceptron (MLP), are trained with the experimental CHF data and their performances are compared. RBF predicts CHF with root mean square (RMS) errors of 0.24%, 7.9%, 0.16% and MLP predicts CHF with RMS errors of 1.29%, 8.31% and 2.71%, in fixed inlet conditions, local conditions and fixed outlet conditions, respectively. The results show that neural networks with RBF structure have superior performance in CHF data prediction over MLP neural networks. The parametric trends of CHF obtained by the trained ANNs are also evaluated and results reported.     

Comparison of deposition models for a TEOS LPCVD process

We present a comparison of models describing the pyrolytic deposition of SiO₂ with a low pressure chemical vapor deposition process. In order to meet industrial simulation requirements, e.g. accuracy and fast delivery of results, we present an overview of established and new models, their use within TCAD applications, and their best results which have been obtained by calibrations according to SEM measurements.     

Investigation of Reflectance Properties in 1D Ternary Annular Photonic Crystal Containing Semiconductor and High-<Emphasis Type="Italic">T</Emphasis><Subscript><Emphasis Type="Bold">c</Emphasis></Subscript> Superconductor

In this paper, we present the theoretical investigation and study of reflectance properties in a 1D ternary annular photonic crystal (TAPC) containing a semiconductor and a high-temperature superconductor. The proposed structure consists of alternate layers of indium nitride (InN), Bi₂Sr₂CaCu₃O₈ (BSCCO), and air placed in free space. A reflectance spectrum of the TAPC is obtained by employing the transfer matrix method (TMM) in the cylindrical waves for both transverse electric (TE) and transverse magnetic (TM) polarized waves. From the study of reflectance spectra, it is observed that the reflection band of the annular photonic crystal depends on the azimuthal mode number m in addition to other parameters. It is found that for azimuthal mode number m = 0, the width of the reflection band of the annular photonic crystal is the same as that of a planar photonic crystal (PPC). When the azimuthal mode number increases, the width of the reflection band increases at higher m values (m >5) for TE waves. In the case of the TM wave, it is interesting to observe that a superpolariton gap is created for a higher value of the azimuthal number (m >0). Further, we see the effect of the starting radius (ρ ₀) on the reflection band of the TAPC structure at the given m number for both TE- and TM-polarized waves. Finally, the effect of temperature on the reflectance spectra for both TE and TM waves at the given ρ ₀ and azimuthal mode has been studied.     

Nanoelectromechanical Chip (NELMEC) Combination of Nanoelectronics and Microfluidics to Diagnose Epithelial and Mesenchymal Circulating Tumor Cells from Leukocytes

An integrated nano‐electromechanical chip (NELMEC) has been developed for the label‐free distinguishing of both epithelial and mesenchymal circulating tumor cells (ECTCs and MCTCs, respectively) from white blood cells (WBCs). This nanoelectronic microfluidic chip fabricated by silicon micromachining can trap large single cells (>12 µm) at the opening of the analysis microchannel arrays. The nature of the captured cells is detected using silicon nanograss (SiNG) electrodes patterned at the entrance of the channels. There is an observable difference between the membrane capacitance of the ECTCs and MCTCs and that of WBCs (measured using SiNG electrodes), which is the key indication for our diagnosis. The NELMEC chip not only solves the problem of the size overlap between CTCs and WBCs but also detects MCTCs without the need for any markers or tagging processes, which has been an important problem in previously reported CTC detection systems. The great conductivity of the gold‐coated SiNG nanocontacts as well as their safe penetration into the membrane of captured cells, facilitate a precise and direct signal extraction to distinguish the type of captured cell. The results achieved from epithelial (MCF‐7) and mesenchymal (MDA‐MB231) breast cancer cells circulated in unprocessed blood suggest the significant applications for these diagnostic abilities of NELMEC.     

THE EFFICIENCY CHALLENGES OF RESOURCE DISCOVERY IN GRID ENVIRONMENTS

Resource discovery is one of the most important services that significantly affects the efficiency of grid computing systems. The inherent dynamic and large-scale characteristics of grid environments make their resource discovery a challenging task. In recent years, different approaches have been proposed for resource discovery, attempting to tackle the challenges of grid environments and improve the efficiency. Being aware of these challenges and approaches is worthwhile in order to choose an appropriate approach according to the application in different organizations. This study reviews the most important factors that should be considered and challenges to be tackled in order to develop an efficient grid resource discovery system.     

An efficient parallel algorithm for the longest path problem in meshes

The longest path problem is the problem of finding a simple path with the maximum number of vertices in a given graph, and so far it has been solved polynomially only for a few classes of graphs. This problem generalizes the well-known Hamiltonian path problem, hence it is NP-hard in general graphs. In this paper, first we give a sequential linear-time algorithm for the longest path problem in meshes. Then based on this algorithm, we present a constant-time parallel algorithm for the problem, which can be run on every parallel machine.     

Improving detailed rule-based feature extraction of urban areas from WorldView-2 image and lidar data

Urbanization is commonly accepted as an important contributor to the growth of man-made structures and as a rapid convertor of natural environments to impervious surfaces. Roofs are one class of impervious surface whose materials can highly influence the quality of urban surface water. In this study, two data sources, WorldView-2 (WV-2) imagery and a combination of WV-2 and lidar data, were utilized to map intra-urban targets, with 13 classes. Images were classified using object-based image analysis. Pixel-based classifications using the support vector machine (SVM) and maximum likelihood (ML) methods were also tested for their abilities to use both lidar data and WV-2 imagery. ML and SVM classifications yielded overall accuracies of 72.46% and 75.69%, respectively. The results of these classifiers exhibited mixed pixels and salt-and-pepper effects. Spectral, spatial, and textural attributes as well as various spectral indices were employed in the object-based classification of WV-2 imagery. Feature classification of WV-2 imagery resulted in 85% overall accuracy. Lidar data were added to WV-2 imagery to assist in the spatial and spectral diversities of urban infrastructures. Classified image made from WV-2 imagery and lidar data achieved 92.84% overall accuracy. Rule-sets of these fused datasets effectively reduced the spectral variation and spatial heterogeneities of intra-urban classes, causing finer boundaries among land-cover classes. Therefore, object-based classification of WV-2 imagery and lidar data efficiently improved detailed characterization of roof types and other urban surface materials.     

Principal component analysis with optimum order sample correlation coefficient for image enhancement

Principal component analysis (PCA) has been commonly used and has played an important role in remote sensing for information extraction. However, the ordinary PCA based on second‐order covariance or correlation is capable of forming components on the basis of the statistical properties of a majority of pixel values – pixel values around mean values. For many applications, principal components should be constructed on the basis of optimum correlation coefficients so that the components can represent low or high values of minority pixels of interest. A new version of the PCA has been proposed on the basis of an optimum order sample correlation coefficient for enhancing the contribution of the image bands including the low or high minority pixel values that can assist in extracting weak information for image classification and pattern recognition. The ordinary PCA becomes the special case of the new version of the PCA introduced in this paper. The new method was validated with a case study of identification of Au/Cu‐associated alteration zones from a Landsat Thematic Mapper (TM) image in the Mitchell‐Sulphurets district, Canada.