Developing an Efficient Auto-Calibration Algorithm for HEC-HMS Program

Two auto-calibration methods, namely Nelder-Mead (NM) and Univariate-Gradient (UG) and a manual approach are available for calibrating the HEC-HMS program. However, their being either inefficient or time consuming makes it difficult to work with HEC-HMS especially when using a snowmelt module in a continuous mode. The main objective of this paper is to develop an efficient Genetic Algorithm (GA) based auto-calibration method for HEC-HMS model (HMS-GA) for continuous snowmelt simulation. A general novel procedure is presented in the absence of the HMS source code to link a heuristic algorithm with the HEC program through Jython programming language. The models are developed and evaluated using daily data from basins in Ajichai, northwestern Iran. A comparison of results for a verification period indicates a substantial improvement by applying the HMS-GA over the other available methods. Moreover, it is shown that neither NM nor UG is able to improve the results obtained by either the manual or HMS-GA. Furthermore, the proposed method significantly improves the calibrations of the HMS model found by the three other methods.     

Thermo-mechanical characterization of polyurea variants

Mechanics of Time-Dependent Materials - The aim of this study is to investigate the role of chain length and hard segment dispersion within the soft segment on thermo-mechanical properties of a...     

Controlled release of fluorouracil (5-FU) from chitosan-co-poly(ethylene glycol)/ poly(glycerol sebacate)-co-poly(ethylene glycol)-coated iron oxide

A blend of polyglycerol sebacate-poly ethylene glygol/chitosan-poly ethylene glycol-coated iron oxide (PGS-PEG/CS-PEG@Fe₃O₄) nanoparticles for 5FU delivery was prepared by reverse ultrasonic emulsification method. To enhance polymers’ solubility, PEG was grafted. Chemical characterization was performed through Fourier transformed infrared and proton nuclear magnetic resonance spectra. In vitro assay revealed that release profile of 5FU-loaded PGS-PEG/CS-PEG@Fe₃O₄ is sustained. Moreover, cytotoxicity was analyzed on HT29 cell line at the presence of external magnetic field using the lactate dehydrogenase and Alamar Blue. Results illustrate that (PGS-PEG/CS-PEG@Fe₃O₄) is promising to use as a carrier for 5FU anticancer agent with sustained tailored release.     

Effect of fuel type on structural and physicochemical properties of solution combustion synthesized CoCr2O4 ceramic pigment nanoparticles

Due to importance and wide applications, CoCr₂O₄ ceramic pigment nanoparticles were synthesized via low-temperature solution combustion route by different fuels including ethylenediamine/oxalic acid, ethylenediamine/citric acid, oxalic acid/citric acid and ethylenediamine/oxalic acid/citric acid. Physicochemical properties of the synthesized samples were determined by different techniques such as fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDX) and color/optical properties were evaluated based on CIELAB system by spectrophotometer. Moreover, thermodynamic considerations of combustion reactions for CoCr₂O₄ nanopigments formation in terms of calculated adiabatic flame temperature and enthalpy of combustion reaction were studied. The Comparison of results and data showed that cobalt chromite pigment nanoparticles synthesized by using ethylenediamine/citric acid and ethylenediamine/oxalic acid/citric acid fuels exhibited higher purity, smaller crystallite size and lower degree agglomeration.     

A model for stress-dependence of apparent permeability in nanopores of shale gas reservoirs

Predicting long-term production from gas shale reservoirs is a challenging task due to changes in effective stress and permeability during gas production. Unlike coal, the variation of sorbing gas permeability with pore pressure in shale does not always feature a biphasic trend under a constant confining pressure. The present contribution demonstrates that the biphasic dependence of permeability on pore pressure depends on a number of physical and geometrical factors, each with a distinct impact on gas permeability. This includes pore size, adsorption isotherm, and the variation of gas viscosity with pore pressure. A single-capillary model is proposed for the apparent permeability of real gas in shale. Results indicate that the biphasic relation between apparent permeability and pore pressure is prevalent when the sorbing gas flows in sufficiently small pores. In addition, the effects of sorption isotherm and internal resistance of nonideal gas to flow cannot be ignored.     

A model for measuring e-learning systems success in universities

In the era of internet, universities and higher education institutions are increasingly tend to provide e-learning. For suitable planning and more enjoying the benefits of this educational approach, a model for measuring success of e-learning systems is essential. So in this paper, we try to survey and present a model for measuring success of e-learning systems in universities. For this purpose, at first, according to literature review, a conceptual model was designed. Then, based on opinions of 33 experts, and assessing their suggestions, research indicators were finalized. After that, to examine the relationships between components and finalize the proposed model, a case study was done in 5 universities: Amir Kabir University, Tehran University, Shahid Beheshti University, Iran University of Science & Technology and Khaje Nasir Toosi University of Technology. Finally, by analyzing questionnaires completed by 369 instructors, students and alumni, which were e-learning systems user, the final model (MELSS Model¹).     

Study on micro-patterning process of vertically aligned carbon nanotubes (VACNTs)

Vertically aligned carbon nanotubes (VACNTs) have drawn significant attention by the researchers because of their nanometric size and favorable material properties. Patterning of CNT forests in the micrometric domain is very important for their application in the area of microelectromechanical system (MEMS). For the first time this paper reports, detailed experimental investigation on a post growth μ-patterning process of VACNT forests. The micromechanical bending (M2B) process was locally applied at the targeted area in order to change the alignment of VACNT forests. Interestingly, the VACNT forest was transformed from typical black body absorber to reflective mirror as the M2B process was applied. Several parameters were identified that govern the resultant patterns such as rotational spindle speed, lateral bending speed, step size, tool morphology, and total depth of bend. Optimization of the parameters was carried out experimentally to obtain the best surface roughness and integrity of the microstructure. A minimum average surface roughness of Ra = 15 nm was achieved with 2000 rpm spindle speed, 1 mm/min bending speed and 1 µm step size.     

Identifying the time of step change in binary profiles

Control charts are intended to aid quality practitioners in monitoring whether a change has occurred in a process. When a control chart indicates an out-of-control signal, it means that the process has changed. However, control chart signals do not indicate the real time of process changes; so estimators are applied to indicate the time when a change in the process takes place, which is referred to as the change point. This paper provides a maximum likelihood estimator to identify the real time of a step change in phase II monitoring of binary profiles, in which the quality of a process is characterized by a logistic regression between the response and predictor variables. Simulation studies are provided to evaluate the effectiveness of the change point estimator.