Electric Pulse Discharge Activated Carbon Supercapacitors for Transportation Application

ScienceTomorrow is developing a high-speed, low-cost process for synthesizing high-porosity electrodes for electrochemical double-layer capacitors. Four types of coal (lignite, subbituminous, bituminous, and anthracite) were used as precursor materials for spark discharge activation with multiscale porous structure. The final porosity and pore distribution depended, among other factors, on precursor type. The high gas content in low-grade carbon resulted in mechanical disintegration, whereas high capacitance was attained in higher-grade coal. The properties, including capacitance, mechanical robustness, and internal conductivity, were excellent when the cost is taken into consideration.     

Microwave processing of electroceramic materials and devices

Microwave synthesis of nano-sized BaTiO₃ and decrystallized titania, and microwave sintering of electroceramics including BaTiO₃, Ba(Zn_1/3Ta_2/3)O₃ (BZT), lead zirconate–titanate (i.e. Pb(Zr _x Ti_1?x )O₃, or PZT), etc., as well as multilayer ceramic capacitors based on X7R, C0G, and ferrite multilayer chip inductors are presented. The results indicate that microwave processing significantly accelerated synthesis and sintering kinetics. As a result, processing time can be saved up to 90%, with the product properties comparable to or better than that of the conventional products.     

Comparison of the Ewald and Wolf methods for modeling electrostatic interactions in nanowires

Ionic compounds pose extra challenges with the appropriate modeling of long‐range coulombic interactions. Here, we study the mechanical properties of zinc oxide (ZnO) nanowires using molecular dynamic simulations with Buckingham potential and determine the suitability of the Ewald (Ann. Phys. 1921; 19) and Wolf (J. Chem. Phys. 1999; 110 (17):8254–8282) summation methods to account for the long‐range Coulombic forces. A comparative study shows that both the summation methods are suitable for modeling bulk structures with periodic boundary conditions imposed on all sides; however, significant differences are observed when nanowires with free surfaces are modeled. As opposed to Wolf's prediction of a linear stress–strain response in the elastic regime, Ewald's method predicts an erroneous behavior. This is attributed to the Ewald method's inability to account for surface effects properly. Additionally, Wolf's method offers highly improved computational performance as the model size is increased. This gain in computational time allows for modeling realistic nanowires, which can be directly compared with the existing experimental results. We conclude that the Wolf summation is a superior technique when modeling non‐periodic structures in terms of both accuracy of the results and computational performance. Copyright © 2010 John Wiley & Sons, Ltd.     

Selection of a pull production control policy under different demand situations for a manufacturing system by AHP-algorithm

A multistage serial production system is considered in the present paper. A generalized model has been developed with the use of probabilistic demand situations for the end product. The demand situations considered are binomial, exponential, lognormal and Poisson. These demand patterns are used as input parameter for various production control policies. The output values for performance parameters are obtained by simulation. The production policies analyzed are Kanban, CONWIP and Hybrid as alternatives for controlling the engineering manufacture. In the presence of several performance measures, it often becomes difficult for the management to select the most appropriate policy. Analytic hierarchy process (AHP) has been implemented for the purpose of selection. Computational results have been reported along with the sensitivity analysis after designing and conducting various experiments.     

Temperature measurements in steady axisymmetric partially premixed flames by use of rainbow schlieren deflectometry

We focus on the utility of rainbow schlieren as a tool for measuring the temperature of axisymmetric partially premixed flames (PPFs). Methane-air PPFs are established on a coannular burner. The flames involve two spatially distinct reaction zones, one in an inner premixed region that has a curved tip and a spatially planar wing portion and another that involves an outer nonpremixed zone in which intermediate species burn in air. Schlieren images are found to visualize clearly these PPF characteristics through light deflection by steep refractive-index gradients in the two reaction zone fronts. The temperature distributions of two flames established at fuel-rich mixture equivalence ratios of phi(r) = 1.5 and 2.0, with bulk-averaged velocities, Vreac = 60 cm s(-1) and Vair = 50 cm s(-1), are inferred from color schlieren images, and a measurement error analysis is performed. Errors arise from two sources. One lies in the process of inferring the temperature from the refractive-index measurement by making assumptions regarding the local composition of the flame. We have shown through simulations that the average temperature deviations due to these assumptions are 1.7% for the phi(r) = 1.5 flame and 2.3% for the phi(r) = 2.0 flame. Another source involves the local uncertainty in the measurement of the transverse ray displacement at the filter plane that is used to determine the refractive index and thereafter the flame temperature. We have ascertained that a maximum error of 4.3% in the temperature determination can be attributed to this local measurement uncertainty. This investigation demonstrates the capability of the schlieren technique for providing not only qualitative displays of the PPFs but also full-field-of-view temperature measurements that are accurate, spatially resolved, and nonintrusive.     

The VVERs at KudanKulam

A Nuclear Power Project is being set-up at KudanKulam in the state of Tamil Nadu, India in collaboration with the Russian Federation. The project comprises of two units each of 1000 MWe VVER type reactor. The design of the plant and supply of all the major equipment is in the scope of the Russian Federation while development of infrastructure and project construction is in Indian scope of works. The VVER (Version V-412) reactor that is under construction at KudanKulam site is an advanced PWR, which incorporates all the features of a modern PWR as per the current Russian, Western and IAEA standards. The KudanKulam site in the southern Indian state of Tamil Nadu was one among the several sites evaluated by the Site Selection Committee, which cleared KudanKulam site for setting up an installed capacity up to 6000 MWe. The design, construction and operation of the plant meets the regulatory and licensing requirements of Russian regulatory body “RTN” as also India's Atomic Energy Regulatory Board. The supply of the equipment from the Russian Federation is on schedule and the project construction work by various Indian agencies is also ahead of schedule. The two units of KudanKulam Nuclear Power Project (KKNPP) are scheduled to achieve first criticality in the year 2007–2008. The paper discusses various design features, project construction and management aspects.     

Effect of conventional and microwave sintering on the properties of yttria alumina garnet-dispersed austenitic stainless steel

The current study examines the effect of heating mode, temperature, and varying yttria alumina garnet (YAG) addition (5 and 10 wt pct) on the densification and properties of austenitic (316L) stainless steel. The straight 316L stainless steel and 316L-YAG composites were heated in a radiatively heated (conventional) and 2.45 GHz microwave sintering furnace. The compacts were consolidated through solid state as well as supersolidus sintering at 1200 °C and 1400 °C, respectively. Both 316L and 316L-YAG compacts couple with microwaves and heat to the sintering temperature rapidly (∼45 °C/min). The overall processing time was reduced by about 90 pct through microwave sintering. As compared to conventional sintering, compacts sintered in microwaves exhibit higher densification and finer microstructure but no corresponding improvement in mechanical properties and wear resistance. This has been correlated to elongated, irregular pore structure in microwave-sintered compacts.