铝液夹杂物检测DMIRT－Ⅲ法的试验研究

提出了一种新的铝液夹杂物快速检测方法。导出了该法的检测原理方程。分析并试验研究了影响检测重复性和分辨率的因素。试验选择了较好的检测参数，并获得了较好的检测结果。     

极尖断面为折线的四极透镜磁性能研究

对传统双曲线极尖的四极透镜进行了磁性能分析。在此基础上，提出了极尖断面为折线的四极透镜结构。磁场的数值分析以及测量结果表明：该结构产生的场梯度均匀，且具有磁场集中、磁场梯度高、便于加工和安装的对称性控制等优点。该结构的四极透镜已用于ＣＹＣＩＡＥ－３０回旋加速器和ＨＩ－１３串列加速器束流输运线之中     

TiNi shape memory alloys prepared by normal sintering

This paper covers the use of conventional press and sinter of titanium and nickel equiatomic blends, involving transient liquid phases. A notable development has been the fabrication of homogeneous compacts from the elemental powders. Results indicate that employment of a double-stage sintering cycle is effective to sustain the geometrical integrity of the sintered sample. The TiNi alloy prepared in this manner exhibits a recovery strain of 4.6% by generating a restoring stress of 230 MPa, with a martensitic transformation point M_s of 34 °C.     

The Effect of Initial Inventories in a Two-Echelon System

A model in which jointly optimal stocks of material and finished products are to be chosen is reexamined. While it costs less to hold material, a certain percentage of the random demand not immediately satisfied by previously finished products is lost. We pay particular attention to the dependence of the optimal stocks on the initial ones, which assumes an interesting form. For example, if the stock of finished products is high but the combined stock is low, die quantity of material ordered depends on the stock of finished products.     

2,3,4- or 2,3,5-trisubstituted furans: catalyst-controlled highly regioselective ring-opening cycloisomerization reaction of cyclopropenyl ketones

2,3,4- or 2,3,5-trisubstituted furans were highly regioselectively formed from the cycloisomerization reaction of the same starting cyclopropenes 1 via the subtle choice of the transition metal halides. Under the catalysis of 5 mol % PdCl2(CH3CN)2, 2,3,5-trisubstituted furans 2 were given in 50-88% yields with 95-99% regioselectivities, while 2,3,4-trisubstituted furans 3 were formed in 78-96% yields with 99% regioselectivities under the catalysis of 5 mol % CuI.     

浅析企业人才的"留"与"流"

文章分析了人才在企业管理和促进企业发展中的重要性,提出在人才招聘中应注意的三个方面因素,全方位分析了留住人才与人才流动之间的关系.     

加强业余党课学习小组建设的必要性

在高校党团组织的领导下，通过不断地实践探索，业余党课学习小组得到发展壮大。业余党课学习小组在团的建设、学生教育以及发展学生党员等工作中发挥着重要的作用。     

Multivariate statistical analysis of a high rate biofilm process treating kraft mill bleach plant effluent.

This study reports on a multivariate analysis of the moving bed biofilm reactor (MBBR) wastewater treatment system at a Canadian pulp mill. The modelling approach involved a data overview by principal component analysis (PCA) followed by partial least squares (PLS) modelling with the objective of explaining and predicting changes in the BOD output of the reactor. Over two years of data with 87 process measurements were used to build the models. Variables were collected from the MBBR control scheme as well as upstream in the bleach plant and in digestion. To account for process dynamics, a variable lagging approach was used for variables with significant temporal correlations. It was found that wood type pulped at the mill was a significant variable governing reactor performance. Other important variables included flow parameters, faults in the temperature or pH control of the reactor, and some potential indirect indicators of biomass activity (residual nitrogen and pH out). The most predictive model was found to have an RMSEP value of 606 kgBOD/d, representing a 14.5% average error. This was a good fit, given the measurement error of the BOD test. Overall, the statistical approach was effective in describing and predicting MBBR treatment performance.     

含氟聚酰亚胺的辐射交联及其交联度的XPS表征

含氟聚酰亚胺(FPI)是一种耐高温、耐水解的新型聚酰亚胺。到目前为止,尚未见文献报道它的辐射交联。本文发现它能在高温辐射下交联,交联后的含氟聚酰亚胺的玻璃化转变温度以及高温力学性能有明显提高。本文还首次用XPS方法做了它的交联度表征。用XPS方法求得FPI的凝胶化剂量为50Mrad。