The effect of solidification time and heat treatment on the fatigue properties of a cast 319 aluminum alloy

Solidification time and heat treatment are known to have a large effect on the microstructure of cast aluminum alloys. This study was conducted to quantify how the fatigue properties of a 319-type aluminum alloy are affected by solidification time and heat treatment. Both porosity-containing (non-hot isostatically pressed (HIP)) and porosity-free (HIP) samples in the T6 (“peak aged”) or T7 (“overaged”) heattreated conditions were tested. As the solidification time increased, the average initiating pore diameter increased and stress-controlled fatigue life decreased. Heat treatment was observed to have a large effect on fatigue properties of the HIP samples. However, in the non-HIP fatigue samples, heat treatment did not significantly change the fatigue life or fatigue strength of the cast 319-type alloy. The absence of an influence of heat treatment on fatigue response is attributed to the predominance of the microporosity in fatigue crack initiation in cast aluminum.     

Learning Organizations in Construction

The transformation of organizations from production-oriented entities to proactive learning entities that continuously leverage the knowledge of the workforce is a primary objective of management researchers. This focus has significant relevance to the construction industry where production-related research has predominantly overshadowed organizational development research. As one effort to change this emphasis, the writers present a research effort designed to study current organization learning techniques and technologies fielded by organizations both inside and outside of the construction industry. Through a series of exploratory case studies, the writers developed a maturity model together with the Construction Industry Institute that provides construction organizations with a framework for developing a learning organization culture. The maturity model focuses on learning organization characteristics of leadership, processes and infrastructure, communication/collaboration, education, and culture at the organization, community, and individual levels. This paper introduces the results of that effort including a presentation of the learning organization maturity model, framework application, and the overall characteristics of a learning organization.     

Pulsed phase-locked loop calibration over frequency

This paper presents a method of correcting for unwanted phase shifts introduced by interchanging ultrasonic transducers and other measurement system components when using the pulsed phase-locked loop (PPLL) ultrasonic system. Theory is derived mathematically separating phase errors into their constituents. The relationship to a previously derived method of determining the number of periods into the tone-burst, at which the system samples, is established, and a method of adjusting this number to be an integer is presented. Implementation of the technology on a computer is demonstrated through experimental results on transducers of differing frequencies and diameters. Sensitivity to path-length is tested. This work has resulted in a straightforward means of calibrating transducers in conjunction with PPLL measurements using a single, fixed reference block     

Early intervention for spelling problems: Teaching functional spelling units of varying size with a multiple-connections framework.

Poor spellers in 2nd grade (n?=?128) participated in 24 20-min sessions that included (a) direct instruction in the alphabet principle (most frequent phoneme-spelling connections); (b) modeling of different approaches, singly and in combination, for developing connections between spoken and written words for 48 words ordered by sound-spelling predictability; and (c) practice in composing. Results of this multilayered intervention showed that (a) more than 1 way of developing sound-spelling connections is effective in teaching spelling but that after training in the alphabet principle, combining whole word and onset-rime training is most effective in achieving transfer of the alphabet principle across word contexts; (b) functional spelling units of not only a single letter but also 2 or more letters are important in beginning spelling; and (c) training in spelling transfers to composition and word recognition. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Desensitization of mutant acetylcholine receptors in transgenic mice reduces the amplitude of neuromuscular synaptic currents

While the slow onset of desensitization of nicotinic acetylcholine receptors (AChRs), relative to the rate of acetylcholine removal, excludes this kinetic state from shaping synaptic responses in normal neuromuscular transmission, its role in neuromuscular disorders has not been examined. The slow-channel congenital myasthenic syndrome (SCCMS) is a disorder caused by point mutations in the AChR subunit-encoding genes leading to kinetically abnormal (slow) channels, reduced miniature endplate current amplitudes (MEPCs), and degeneration of the postsynaptic membrane. Because of this complicated picture of kinetic and structural change in the neuromuscular junction, it is difficult to assess the importance of the multiple factors that may be responsible for the reduced endplate current amplitudes, and ultimately the clinical syndrome. In order to address this we have used a transgenic mouse model for the SCCMS that has slow AChR ion channels and reduced endplate responsiveness in the absence of any of the degenerative changes. We found that the reduction in MEPC amplitudes in these mice could not be explained by either reduced AChR number or by reduced AChR channel conductance. Rather, we found that the mutant AChRs in situ manifested an activity-dependent reduction in sensitivity that caused diminished MEPC and endplate current amplitude with nerve stimulation. This observation demonstrates that the basis for the reduction in MEPC amplitudes in the SCCMS may be multifactorial. Moreover, these findings demonstrate that, under conditions that alter their rate of desensitization, the kinetic properties of nicotinic AChRs can control the strength of synaptic responses.     

Role of early supervisory experience in supervisor performance.

Explores the role of early supervisory experience and cognitive ability in 1st-line supervisor performance. Similar to the F. L. Schmidt et al (see record 1986-31441-001) study of nonsupervisors, this research tested structural models hypothesizing relationships among supervisory experience, cognitive ability, supervisory knowledge and proficiency, and performance ratings, using a sample of 570 2nd-tour soldiers. The Schmidt et al model with an additional ability?→?experience path provided the best fit. The significant ability?→?experience path was interpreted as indicating that demonstrated ability contributes to soldiers being given the opportunity to obtain supervisory experience. Experience had a greater impact on supervisor proficiency than on supervisor knowledge. Ability had a greater impact on supervisor knowledge than on proficiency. Discussion focuses on the personal characteristics that might be involved in being assigned supervisory responsibilities. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Laminated beams subjected to transverse load

A simple elastic solution has been developed for predicting the shear stress distribution in a laminated beam subjected to a variety of transverse loading conditions. Photoelastic tests on composite models involving a single bonding layer have been used to validate the theory, and also to comment upon the significance of these results in interpreting the interlaminar shear strength and bending modulus of the simplest form of laminated strip.     

Demonstration of an endurance limit in cast 319 aluminum

An investigation of the fatigue properties of cast W319-T7, an Al-Si-Cu alloy used in automotive engine components, was conducted using ultrasonic testing equipment with operating frequencies of 20 kHz. The stress-life (S-N) behavior at room temperature was determined for three solidification conditions of this alloy, where stresses for fatigue lives ranging from 10⁵ to 10⁹ cycles were determined. The results are compared to fatigue data acquired using servohydraulic equipment operating at 40 Hz. No influence of loading frequency has been observed. A discrete endurance limit is indicated for each of the three solidification conditions of W319-T7. The scientific and practical implications of this result are discussed. A material model presented previously is modified by introducing a crack growth threshold condition in order to predict the observed endurance limits. The model is shown to effectively predict the influence of solidification time on the fatigue properties of W319-T7.     

Toward the reduction of population obesity: Macrolevel environmental approaches to the problems of food, eating, and obesity.

The authors reviewed the evidential basis of three environmental approaches to reducing population obesity: What are the effects of (a) taxing or subsidizing foods, (b) manipulating the ease of food access, and (c) restricting access to certain foods? A narrative review evaluated evidence using National Heart, Lung, and Blood Institute criteria. There was strong evidence that subsidization influences food purchases, but not necessarily food consumption or body weight. Ease of food access may influence food purchases, and possibly food intake and body weight. Data on restriction were lacking. More studies are needed to justify that altering these macro-environmental variables will necessarily reduce population obesity. A proposed conceptual model posits that the steps through environmental interventions may exert intended and unintended influences on body weight and obesity prevalence. Contemplated policy changes should weigh scientific evidence with social judgments and values concerning changes to the environment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Linked influence of pH and cations on fatty-acid monolayer integrity related to high-quality Langmuir-Blodgett films

This study shows the connection between the morphological structure of transferred films and the chemical composition of the monolayer before transfer. The stability of a behenic acid monolayer depends on the linked influence of the type of cation and of the pH value in the aqueous subphase. The stability of the monolayer is assessed by the expansion of the solid-packed state and by the relaxation time. Its integrity is characterized by the number of crystal defects which appear in transferred Langmuir-Blodgett (LB) films as seen through Nomarski microscope observations. Both stability and integrity are greatly improved when Cd²⁺ or Mn²⁺are added to the subphase at pH 5.75 and 6 respectively. In these conditions, the transfer is very efficient and the LB films thus obtained are of very high quality. The pH values of the subphase at which the molecules of behenic acid are transformed into bivalent salts differ significantly according to the nature of the cation involved. Comparing infrared spectra of the LB films, it appeared that the relative amount of acid/salt found in the monolayer was practically the same with a subphase containing either Cd²⁺ at pH 5.75 or Mn²⁺ at pH 6. This suggests that the ratio of acidic and salt forms would be a key parameter for obtaining high-quality LB films.