Effect of thermal ageing on Nylon 6,6 fibres

The residual effects of thermal ageing at various temperatures on fibres of the aliphatic polyamide Nylon 6,6 have been studied. Both crystal and macro structural characteristics manifest the residual effects. The former category includes changes in intensity, 2 values and half width. The macro changes include introduction of surface damages in the form of holes, material deposits etc. The fibre also undergoes reduction in weight. The structural changes suggest deterioration in the initial tensile characteristics which has been verified experimentally. A direct correlation between the tensile strength and the angular separation of the equatorial reflections has also been observed.     

Retrospective dosimetry: dose evaluation using unheated and heated quartz from a radioactive waste storage building

In the assessment of dose received from a nuclear accident, considerable attention has been paid to retrospective dosimetry using heated materials such as household ceramics and bricks. However, unheated materials such as mortar and concrete are more commonly found in industrial sites and particularly in nuclear installations. These materials contain natural dosemeters such as quartz, which usually is less sensitive than its heated counterpart. The potential of quartz extracted from mortar in a wall of a low-level radioactive-waste storage facility containing distributed sources of 60Co and 137Cs has been investigated. Dose-depth proliles based on small aliquots and single grains from the quartz extracted from the mortar samples are reported here. These are compared with results from heated quartz and polymineral fine grains extracted from an adjacent brick, and the integrated dose recorded by environmental TLDs.     

The VVERs at KudanKulam

A Nuclear Power Project is being set-up at KudanKulam in the state of Tamil Nadu, India in collaboration with the Russian Federation. The project comprises of two units each of 1000 MWe VVER type reactor. The design of the plant and supply of all the major equipment is in the scope of the Russian Federation while development of infrastructure and project construction is in Indian scope of works. The VVER (Version V-412) reactor that is under construction at KudanKulam site is an advanced PWR, which incorporates all the features of a modern PWR as per the current Russian, Western and IAEA standards. The KudanKulam site in the southern Indian state of Tamil Nadu was one among the several sites evaluated by the Site Selection Committee, which cleared KudanKulam site for setting up an installed capacity up to 6000 MWe. The design, construction and operation of the plant meets the regulatory and licensing requirements of Russian regulatory body “RTN” as also India's Atomic Energy Regulatory Board. The supply of the equipment from the Russian Federation is on schedule and the project construction work by various Indian agencies is also ahead of schedule. The two units of KudanKulam Nuclear Power Project (KKNPP) are scheduled to achieve first criticality in the year 2007–2008. The paper discusses various design features, project construction and management aspects.     

Estimating the Hydraulic Conductivity of Landfilled Municipal Solid Waste Using the Borehole Permeameter Test

This paper reports the in situ field saturated hydraulic conductivity of municipal solid waste at a landfill in Florida. The saturated hydraulic conductivity (Ks) was estimated at 23 locations using the borehole permeameter test, a method commonly used for determination of the Ks of unsaturated soil. The Ks of the landfilled waste was found to range from 5.4×10?6 to 6.1×10?5?cm/s. The Ks was found to be on the lower end of the range of Ks reported by previous studies. The hydraulic conductivity of the waste decreased with depth, the likely result of greater overburden pressures associated with deep locations of the landfill. Permeability values (kw) of the landfilled waste calculated based on Ks were compared with permeability values estimated using air as the fluid (air permeability, ka). Values of ka were found to be approximately three orders of magnitude greater than those of kw. The lower permeability of the waste to water was primarily attributed to entrapped gas. Other factors such as potential clogging of media and short-circuiting of air along the well may also have contributed to the differences in ka and kw.     

Characterization and tribological behavior of cast In-Situ Al (Mg,Mo)-Al2O3 (MoO3) composite

Aluminum alloy—based cast in-situ composite has been synthesized by dispersion of externally added molybdenum trioxide particles (MoO₃) in molten aluminum at the processing temperature of 850 °C. During processing, the displacement reaction between molten aluminum and MoO₃ particles results in formation of alumina particles in situ and also releases molybdenum into molten aluminum. A part of this molybdenum forms solid solution with aluminum and the remaining part reacts with aluminum to form intermetallic phase Mo(Al_1−x Fe _x )₁₂ of different morphologies. Magnesium (Mg) is added to the melt in order to help wetting of alumina particles generated in situ, by oxidation of molten aluminum by molybdenum trioxide, and helps to retain these particles inside the melt. The mechanical properties of the cast in-situ composite, as indicated by ultimate tensile stress, yield stress, percentage elongation, and hardness, are relatively higher than those observed either in cast commercial aluminum or in cast Al-Mo alloy. The wear and friction of the resulting cast in-situ Al(Mg,Mo)-Al₂O₃(MoO₃) composites have been investigated using a pin-on-disc wear testing machine under dry sliding conditions at different normal loads of 9.8N, 14.7N, 19.6N, 24.5N, 29.4N, 34.3N, and 39.2 N and a constant sliding speed of 1.05 m/s. The results of the current investigation indicate that the cumulative volume loss and wear rate of cast in-situ composites are significantly lower than those observed either in cast commercial aluminum or in cast Al-Mo alloy, under similar load and sliding conditions. Beyond about 30 to 35 N loads, there appears to be a higher rate of increase in the wear rate in the cast in-situ composite as well as in cast commercial aluminum and cast Al-Mo alloy. For a given normal load, the coefficient of friction of cast in-situ composite is significantly lower than those observed either in cast commercial aluminum or in cast Al-Mo alloy. The coefficient of friction of cast in-situ composite increases gradually with increasing normal load while those observed in cast commercial aluminum or in cast Al-Mo alloy remain more or less the same. Beyond a critical normal load of about 30 to 35 N, the coefficient of friction decreases with increasing normal load in all the three materials.     

Open-Source Model Checking

We present GMC², a software model checker for GCC, the open-source compiler from the Free Software Foundation (FSF). GMC², which is part of the GMC static-analysis and model-checking tool suite for GCC under development at SUNY Stony Brook, can be seen as an extension of Monte Carlo model checking to the setting of concurrent, procedural programming languages. Monte Carlo model checking is a newly developed technique that utilizes the theory of geometric random variables, statistical hypothesis testing, and random sampling of lassos in Büchi automata to realize a one- sided error, randomized algorithm for LTL model checking. To handle the function call/return mechanisms inherent in procedural languages such as C/C++, the version of Monte Carlo model checking implemented in GMC² is optimized for pushdown-automaton models. Our experimental results demonstrate that this approach yields an efficient and scalable software model checker for GCC.     

Effects of diet on rumen proliferation and fecal shedding of Escherichia coil O157:H7 in calves

Calves inoculated with Escherichia coli O157:H7 and fed either a high-roughage or high-concentrate diet were evaluated for rumen proliferation and fecal shedding of E. coli O157:H7. Calves fed the high-roughage diet had lower mean rumen volatile fatty acid concentrations and higher rumen pH values than did calves fed the high-concentrate diet. Despite these differences in rumen conditions, the calves fed the high-roughage diet did not have greater rumen populations of E. coli O157: H7 and did not exhibit increased or longer fecal shedding compared with the calves fed the high-concentrate diet. Two calves shedding the highest mean concentrations of E. coli O157:H7 were both fed the high-concentrate diet. There was a significant (P < 0.05) positive correlation between fecal shedding and rumen volatile fatty acid concentration in calves fed a high-concentrate diet. The effects of diet on E. coli O157:H7 proliferation and acid resistance were investigated using an in vitro rumen fermentation system. Rumen fluid collected from steers fed a high-roughage diet, but not from steers fed a high-concentrate diet, supported the proliferation of E. coli O157:H7. Rumen fluid from steers fed a high-concentrate diet rapidly induced acid resistance in E. coli O157:H7. The impact of diet on fecal shedding of E. coli O157:H7 is still unclear and may depend on dietary effects on fermentation in the colon and on diet-induced changes in the resident microflora. However, rapid development of acid tolerance by E. coli O157:H7 in the rumens of calves fed high-concentrate diets, allowing larger populations to survive passage through the acidic abomasum to proliferate in the colon, may be one factor that influences fecal shedding in cattle on feed.     

Andreev Bound-State Tunneling and ESR Spectroscopy of High-Temperature Superconductors and Observations of Broken Time-Reversal Symmetry

An emphasis on reliable materials growth and development of new fabrication techniques has allowed us to investigate the electronic structure of high-temperature superconductors by planar quasiparticle tunneling and electron paramagnetic resonance (EPR) spectroscopies. The quasiparticle (QP) density of states (DoS) is investigated by tunneling into oriented thin films of Y₁Ba₂Cu₃O₇ (YBCO) and single crystals of Ba₂Sr₂Ca₁Cu₂O₈ (BSCCO). Data are obtained as a function of crystallographic orientation, temperature, doping, damage, and applied magnetic field. These data demonstrate that the observed zero-bias conductance peak (ZBCP) is composed of Andreev bound states (ABS) which intrinsically form at a symmetry-breaking interface of an unconventional superconductor, for example, a (110)-surface of d-wave YBCO. Tunneling into doped or ion-damaged YBCO provides a measure of the QP scattering rate below T _c. An applied field causes Doppler shift of the ABS, arising from the scalar product between the QP velocity and the superfluid momentum, v _F·P _s, observed as a splitting in the ZBCP. Magnetic hysteresis of the splitting is consistent with the effects of strong vortex pinning near the interface. The directional field dependence shows that the ABS is highly anisotropic in its transport. These results, plus in-plane crystallographic orientational dependence on single-crystal BSCCO, demonstrate the d-wave symmetry of this superconductor. Below 8 K and in zero applied field, the ZBCP splits, indicating a transition into a superconducting state with spontaneously broken time-reversal symmetry (BTRS). EPR experiments are used to detect directly the spontaneous formation of the magnetic moments in the BTRS state.     

Transients during 138-kV SF6 breaker switching of low inductivecurrents

The authors discusses the effects of switching low inductive currents with 138 kV SF₆ breakers in a petrochemical plant. Switching transients are believed to have contributed to the failure of a 13.8 kV PT and a 13.8 kV air magnetic circuit breaker. The high-frequency transient surge can transfer across a transformer due to transformer capacitances between the high- and low-voltage windings. The electromagnetic transient program system (ETPS) model and different case studies are discussed with the effect of different transformer winding capacitances. The interruption mechanism of low inductive currents is also described. This analysis demonstrates the need to conduct switching transient studies and the need for surge arresters on transformer secondary terminals under certain system conditions     

Temperature-controlled and constant-power radio-frequency ablation: what affects lesion growth?

Radio-frequency (RF) catheter ablation is the primary interventional therapy for the treatment of many cardiac tachyarrhythmias. Three-dimensional finite element analysis of constant-power (CPRFA) and temperature-controlled RF ablation (TCRFA) of the endocardium is performed. The objectives are to study: 1) the lesion growth with time and 2) the effect of ground electrode location on lesion dimensions and ablation efficiency. The results indicate that: a) for TCRFA: i) lesion growth was fastest during the first 20 s, subsequently the lesion growth slowed reaching a steady state after 100 s, ii) positioning the ground electrode directly opposite the catheter tip (optimal) produced a larger lesion, and iii) a constant tip temperature maintained a constant maximum tissue temperature; b) for CPRFA: i) the lesion growth was fastest during the first 20 s and then the lesion growth slowed; however, the lesion size did not reach steady state even after 600 s suggesting that longer durations of energy delivery may result in wider and deeper lesions, ii) the temperature-dependent electrical conductivity of the tissue is responsible for this continuous lesion growth, and iii) an optimal ground electrode location resulted in a slightly larger lesion and higher ablation efficiency.