TEM study of microstructure development during low-cycle fatigue of an overaged Al-Mg-Si alloy

The evolution of dislocation structure during room-temperature, uniaxial, low-cycle fatigue of an overaged Al-Mg-Si alloy is studied. Ageing at 450°C produces a fine dispersion of Mg₂Si precipitate particles. During fully reversed strain-controlled cyclic tests, these fine particles restrict deformation to local regions and a stable dislocation substructure is developed early in fatigue life. Substructural observations of hardening and saturation by transmission electron microscopy reveal extensive dislocation band formation on Mg₂Si precipitate rods. Various microstructural features such as configuration of tangled dislocations, dislocation cells, precipitate morphologies, sizes, precipitate-free zones, etc., have been examined during cyclic hardening and saturation. The results have been analysed in terms of kinematic and isotropictype microstructural mechanisms.     

Network and device-level impacts: performance and reliability of active I/O storage systems

Distributed active storage architectures are designed to offload user-level processing to the peripheral from the host servers. In this paper, we report preliminary investigation on performance and fault recovery designs, as impacted by emerging storage interconnect protocols and state-of-the-art storage devices. Empirical results obtained using validated device-level and interconnect data demonstrate the significance of the said parameters on the overall system performance and reliability.     

Microarchitectures for Managing Chip Revenues under Process Variations

As transistor feature sizes continue to shrink intothe sub-90nm range and beyond, the effects of process variationson critical path delay and chip yields have amplified. A commonconcept to remedy the effects of variation is speed-binning, bywhich chips from a single batch are rated by a discrete range offrequencies and sold at different prices. In this paper, we discussstrategies to modify the number of chips in different bins andhence enhance the profits obtained from them. Particularly, wepropose a scheme that introduces a small Substitute Cacheassociated with each cache way to replicate the data elementsthat will be stored in the high latency lines. Assuming a fixedpricing model, this method increases the revenue by as much as13.8% without any impact on the performance of the chips.     

Plastic instability in dual-pressure tube-hydroforming process

The tube-hydroforming process has become an indispensable manufacturing technique in recent years. Successful tube hydroforming requires bulging to take place without causing any type of instability such as bursting, wrinkling or buckling. The dual-pressure tube-hydroforming process was introduced to achieve a favorable tri-axial stress state in the deformation process. In this paper, the effect of applying counter pressure on plastic instability of thin-walled tubes is analyzed. It is concluded that in dual-pressure tube hydroforming, the onset of plastic instability is delayed and the ductility of the metal is increased.     

A unique method for reducing losses of bends in dielectric optical wave guide

The dielectric optical wave guide is finding growing attention at millimeter wave frequencies. However the dielectric optical waveguide radiates at bends and thus transmission loss increases. These radiations are in the outword direction of bends. This output radiation at output bends arises due to change in phase velocities of the propagating wave at the centre of the dielectric guide and the phase velocity at the outer surface of the dielectric guide. A unique methiod is suggested to avoid these radiation losses.Experimental results are also shown at microwave frequencies.     

Performance and buffering requirements of Internet protocols overATM ABR and UBR services

ATM networks are quickly being adopted as backbones over various parts of the Internet. This article studies the dynamics and performance of the TCP/IP protocol over the ABR and UBR services of ATM networks. Specifically the buffering requirements in the ATM switches as well as the ATM edge devices. It is shown that with a good switch algorithm, ABR pushes congestion to the edges of the ATM network while UBR leaves it inside the ATM portion. As a result, the switch ABR buffer requirement for zero-packet-loss high-throughput TCP transmission is a sublinear function of the number of TCP connections     

Variation of wave impedance of shielded suspended dielectric guide

A shielded suspended dielectric guide is a dielectric rectangular slab enclosed by regular metallic side walls from all the sides. This type of structure is used in dual mode phase shifter where the size of the normal rectangular wave guide is reduced at the ends, where a dielectric material is embeded in ferrite core. Hence impedance variation of a phase shifter at its transition may be easily calculated using shielded suspended dielectric guide which is a prime parameter for optimum efficiency of wave launching.     

High voltage 4H-SiC Schottky barrier diodes

Characteristics of 4H-SiC Schottky barrier diodes with breakdown voltages up to 1000 V are reported for the first time. The diodes showed excellent forward I-V characteristics, with a forward voltage drop of 1.06 V at an on-state current density of 100 A/cm². The specific on-resistance for these diodes was found to be low (2×10 ^-3 Ω-cm² at room temperature) and showed a T ^1.6 variation with temperature. Titanium Schottky barrier height was determined to be 0.99 eV independent of the temperature. The breakdown voltage of the diodes was found to decrease with temperature     

Prognostic evaluation of early indicators in fulminant hepatic failure by multivariate analysis

Results of eight multicenter, randomized, placebo-controlled, double-blind, parallel-group studies were pooled to assess the efficacy of the angiotensin II-receptor blocker irbesartan over the dose range of 1 to 900 mg. A total of 2955 adults with a seated diastolic blood pressure of 95 to 110 mm Hg were randomized to treatment with oral irbesartan once daily or placebo for 6 to 8 weeks. Office blood pressure was measured at trough (24+/-3 hours after the last dose) and peak (3+/-1 hours after the last dose) by mercury sphygmomanometry. Demographic characteristics (mean blood pressure; 151/101 mm Hg; mean age, 54 years; 63% male; and 82% white) were similar across all dose groups. After the groups were pooled, antihypertensive efficacy was assessed by therapeutic response (trough seated diastolic blood pressure <90 mm Hg or a reduction from baseline of > or = 10 mm Hg) and by modeling of the maximum reductions in trough and peak seated diastolic and systolic blood pressure. Antihypertensive effects increased with increasing doses and reached a plateau at > or = 300 mg. Irbesartan 150 mg provided placebo-subtracted reductions in trough seated systolic and diastolic blood pressure of approximately 8 and approximately 5 mm Hg, respectively, with 56% of patients displaying a favorable response. In conclusion, irbesartan provides clinically significant blood pressure lowering, with a clear relationship between (log) dose and antihypertensive effect.