From electromagnetics to system performance: a new method for theerror-rate prediction of atmospheric communications links

An original and general method is proposed to predict the impact of electromagnetic effects due to the environment on the error performance of microwave communications systems. The method is based on the concept of a process-oriented model which consists of a simplified representation of the physical phenomenon responsible for transmission impairments and simulates its influence on the signals received by any given communications link. The method yields a thorough characterization of the system impairments in both the time domain, by calculating the fluctuations of the received signal during the evolution of the physical process, and the frequency domain, by inferring the communication channel transfer function from the frequency dependence of the received waveform. In addition, by introducing the simulated channel transfer function as a filter in a communications system simulation software, the method evaluates the degradation induced in the system performance. Three applications as different as scintillation due to turbulence in clouds, depolarization by rain and ice crystals, and interference in the presence of diffraction on obstacles demonstrate the ability of the method to deal with actual radio-communications system impairments     

Prevalence of sub-clinical vitamin A deficiency and malnutrition in slum children in Maraicabo - Venezuela

The present cross sectional study was carried out to estimate the prevalence of vitamin A deficiency among children by means of clinics and conjunctival impression cytology (CIC), and nutritional status by anthropometric indicators H//A, W//A, W//H. The study population included 157 children 2-6 y old, from urban and rural slums of Maracaibo, Venezuela, Conjunctival impression cytology was performed by ICEPO standard procedure. Z-score was applied to anthropometric data with reference values of NCHS-WHO. No evidence of clinical or ophthalmologic signs of vitamin A deficiency were detected. The prevalence of subclinical vitamin A deficiency, as detected by abnormal CIC, was 35.4%, being higher in rural children (48.3%). These prevalence values are higher than the criteria laid down by WHO/UNICEF to indicate a public health problem (> 20%). Mild or moderate protein-energy global malnutrition and stunting were detected in 36.1% and 44.6% of children, respectively. Abnormal CIC was indistinctly observed (approximately equal to 35%) as much in children with adequate nutrition as in malnourished ones. There was no significant difference in the distribution of the CIC results in relation to nutritional status. The findings indicate that CIC and Z-score of nutritional anthropometric data are useful to characterize the risk of vitamin A deficiency and of malnutrition in communities. Beside the implementation of an integral nutritional program which includes supplementation, food fortification and dietary diversification, improvement of socio-economic and sanitation conditions and also the educational level, with emphasis on nutritional and health education, are highly recommended.     

Analysis of source code metrics from ns-2 and ns-3 network simulators

Ns-2 and its successor ns-3 are discrete-event simulators which are closely related to each other as they share common background, concepts and similar aims. Ns-3 is still under development, but it offers some interesting characteristics for developers while ns-2 still has a large user base. While other studies have compared different network simulators, focusing on performance measurements, in this paper we adopted a different approach by focusing on technical characteristics and using software metrics to obtain useful conclusions. We chose ns-2 and ns-3 for our case study because of the popularity of the former in research and the increasing use of the latter. This reflects the current situation where ns-3 has emerged as a viable alternative to ns-2 due to its features and design. The paper assesses the current state of both projects and their respective evolution supported by the measurements obtained from a broad set of software metrics. By considering other qualitative characteristics we obtained a summary of technical features of both simulators including, architectural design, software dependencies or documentation policies.     

Quality changes in chilled Norway lobster (Nephrops norvegicus) tail meat and the effects of delayed icing

The quality deterioration of Norway lobster (Nephrops norvegicus) tail meat was monitored during ice storage. The K‐value started at 0.7% and reached a value of 39.7% on day 14. Muscle pH followed a sigmoidal pattern that reached a plateau on day 6. Bacterial load and trimethylamine (TMA) increased only after a lag phase to reach considerable levels by day 14 (5.3 log cfu and 10.2 mg (100 g)^?1, respectively). These analytical data were compared with sensory data. Principal component analysis (PCA) indicated that laboratory measures were correlated positively with the smell strength of cooked product (increasingly strong) and negatively with the smell character of raw and cooked product (sour‐ammoniacal in raw and neutral in cooked products), flavour and aftertaste (both increasingly bland–bitter). The effects of icing delays on the quality of tail meat were also evaluated. Changes in K‐values, microbial load, muscle pH and TMA indicated that the delay to icing should be no more than 4 h (at 16 °C) to ensure that quality is not compromised during subsequent post‐harvest storage.     

Fracture behavior of recrystallized and stress-relieved Zircaloy-4 cladding under biaxial stress conditions

Pellet-cladding mechanical interaction (PCMI) under reactivity-initiated accident conditions may lead to failure of high-burnup fuel rods. The biaxial stress states of Zircaloy cladding tubes induced by PCMI loading presumably makes the tubes more susceptible to failure. To clarify the influence of the anisotropic mechanical properties of Zircaloy cladding tubes on their fracture behavior under biaxial stress conditions, biaxial tensile tests were performed, and the measured stresses and strains were converted to reduced parameters such as equivalent strain, equivalent stress, and stress triaxiality by using the anisotropic constants of the Hill yield function derived in our previous study. The minimum fracture strains of recrystallized (RX) and stress-relieved (SR) specimens were located where the stress ratio of axial to circumferential is 0.75. The equivalent plastic fracture strains tended to decrease monotonously with increasing stress triaxiality, which is a typical trend observed in ductile fracture, in the range of 0.65–0.78 for both specimens. In the case of SR specimens, however, the analysis with stress triaxiality did not reduce the fracture strains well to a single trend curve, showing that another influential factor is required such as an anisotropic fracture behavior or a plastic behavior deviated from that predicted by the yield function.     

Design optimization of a polygeneration plant fuelled by natural gas and renewable energy sources

A new and systematic procedure to select and size a polygeneration plant fuelled by natural gas, solar energy and gasified biomass is presented in this paper. The proposed procedure is based on the superstructure definition, containing a long list of possible configurations for a polygeneration plant simultaneously producing electricity, heat, cold and fresh water. Based on that superstructure, a mathematical programming model was developed and applied to a Spanish tourist resort. Three key aspects were optimized in the mathematical programming problem: energy savings, greenhouse gases (GHG) emission reduction and economic feasibility. The results show, firstly, that the simultaneous production of electricity, heat, cold and fresh water is reliable upon the established assumptions. Secondly, that today higher economic profitability is yet achieved with only natural gas-based technologies, although higher energy savings and GHG reduction are obtained through the gradual increase of renewable energy sources.     

The Core Curriculum on Childhood Trauma: A tool for training a trauma-informed workforce.

Recognition of the nationwide high prevalence of psychological trauma in children and adolescents, combined with increasing awareness of the far-reaching adverse consequences of childhood trauma, have led to calls to develop a trauma-informed mental health workforce. We describe the initial pilot test of the Core Concepts portion of the Core Curriculum on Childhood Trauma, as conducted in a large graduate school of social work. The Core Curriculum uses detailed case vignettes of trauma-exposed youth and families, combined with problem-based learning methods, to promote two primary learning aims: (a) to enhance the development of foundational trauma-related conceptual knowledge, and (b) to accelerate the acquisition of trauma-informed clinical reasoning and clinical judgment. Vignettes are presented in segments to simulate gathering, organizing, drawing meaning from, and making decisions based on information in professional practice. After each segment, the facilitator helps learners to summarize relevant facts, develop hunches and hypotheses, identify learning issues, and plan next steps. The Curriculum was very favorably received by students and was associated with marked increases in self-efficacy in applying the Core Concepts to work with trauma-exposed youth and families. We discuss ways in which the Curriculum can be used, especially as a foundation for training in specific evidence-based treatment protocols, to help prepare a national mental health workforce capable of implementing trauma-informed evidence-based practice. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Straightforward, one-step fabrication of ultrathin thermoresponsive films from commercially available pNIPAm for cell culture and recovery

The use of thermoresponsive surfaces as platforms for cell culture and cell regeneration has been explored over the last couple of decades. Poly-N-isopropylacrylamide (pNIPAm) is a well characterized thermoresponsive polymer which has an aqueous lower critical solution temperature (LCST) in a physiologically useful range, which allows it to reversibly attract (T < 32 °C) and repel water (T > 32 °C). It is this phenomenon that is exploited in temperature-controlled cell harvesting. pNIPAm coatings are generally poorly cell compatible and a number of complex or expensive techniques have been developed in order to overcome this issue. This study seeks to design a simple one-step system whereby commercially sourced pNIPAm is used to achieve similar results. Films were deposited using the operationally simple but rheologically complex spin coating technique. Reversible temperature modulated cell adhesion was achieved using a variety of different cell lines. This system offers a simplistic and cheaper alternative to methods used elsewhere.