Planar array of corrugated tapered slot antennas for ultrawideband biomedical microwave imaging system

A planar antenna array that includes 12 corrugated tapered slot elements for use in ultrawideband (UWB) biomedical microwave imaging systems is presented. The used corrugate tapered slot antenna has a compact size, low profile, moderate gain, and distortionless performance in the time domain. The array is immersed in a carefully designed matching liquid of suitable dielectric constant to improve the matching between the array and the imaged object, and thus, to increase the dynamic range of the imaging system. A suitable platform is designed and fabricated to accommodate the array, breast phantom, and a coupling liquid for the case of UWB breast imaging. The design of the whole system is optimized using trust‐region framework method in the simulation tool CST Microwave Studio. The performance of the designed array is confirmed via measurements in a realistic imaging environment. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Hypoglycemic effects of cocoa (Theobroma cacao L.) autolysates

Fat, alkaloid and polyphenol contents of two clones of cocoa (UIT1 and PBC 140) were removed and the remaining powder was autolyzed at pH 3.5 and 5.2. Based on the results, autolysates of UIT produced at pH 3.5 exhibited the highest ability to inhibit α-amylase activity. However, no α-glucosidase inhibition activity was observed under the conditions specified. Autolysates produced under pH 3.5 caused the highest amount of insulin secretion. In streptozotocin-diabetic rats, all cocoa autolysates significantly decreased blood glucose at 4 h. To assure that the results from the assays were not due to the polyphenols of cocoa autolysates qualitative and quantitative tests were applied. According to their results cocoa autolysates were found to be free from polyphenols. Analysis of amino acid composition revealed that cocoa autolysates were abundant in hydrophobic amino acids. It can be suggested that besides other compounds of cocoa, its peptides and amino acids could contribute to its health benefits.     

Phase Transformations of α-Alumina Made from Waste Aluminum via a Precipitation Technique

We report on a recycling project in which α-Al₂O₃ was produced from aluminum cans because no such work has been reported in literature. Heated aluminum cans were mixed with 8.0 M of H₂SO₄ solution to form an Al₂(SO₄)₃ solution. The Al₂(SO₄)₃ salt was contained in a white semi-liquid solution with excess H₂SO₄; some unreacted aluminum pieces were also present. The solution was filtered and mixed with ethanol in a ratio of 2:3, to form a white solid of Al₂(SO₄)₃·18H₂O. The Al₂(SO₄)₃·18H₂O was calcined in an electrical furnace for 3 h at temperatures of 400–1400 °C. The heating and cooling rates were 10 °C/min. XRD was used to investigate the phase changes at different temperatures and XRF was used to determine the elemental composition in the alumina produced. A series of different alumina compositions, made by repeated dehydration and desulfonation of the Al₂(SO₄)₃·18H₂O, is reported. All transitional alumina phases produced at low temperatures were converted to α-Al₂O₃ at high temperatures. The X-ray diffraction results indicated that the α-Al₂O₃ phase was realized when the calcination temperature was at 1200 °C or higher.     

The Effect of Ti on Mechanical Properties of Extruded In-Situ Al-15 pct Mg2Si Composite

This work was carried out to investigate the effect of different Ti concentrations as a modifying agent on the microstructure and tensile properties of an in-situ Al-15 pctMg₂Si composite. Cast, modified, and homogenized small ingots were extruded at 753 K (480 °C) at the extrusion ratio of 18:1 and ram speed of 1 mm/s. Various techniques including metallography, tensile testing, and scanning electron microscopy were used to characterize the mechanical behavior, microstructural observations, and fracture mechanisms of this composite. The results showed that 0.5 pctTi addition and homogenizing treatment were highly effective in modifying Mg₂Si particles. The results also exhibited that the addition of Ti up to 0.5 pct increases both ultimate tensile strength (UTS) and tensile elongation values. The highest UTS and elongation values were found to be 245 MPa and 9.5 pct for homogenized and extruded Al-15 pctMg₂Si-0.5 pctTi composite, respectively. Fracture surface examinations revealed a transition from brittle fracture mode in the as-cast composite to ductile fracture in homogenized and extruded specimens. This can be attributed to the changes in size and morphology of Mg₂Si intermetallic and porosity content.     

Inhibition of Listeria monocytogenes and Salmonella by Combinations of Oriental Mustard,Malic Acid,and EDTA

The antimicrobial activities of oriental mustard extract alone or combined with malic acid and EDTA were investigated against Salmonella spp. or Listeria monocytogenes at different temperatures. Five strain Salmonella or L. monocytogenes cocktails were separately inoculated in Brain Heart Infusion broth containing 0.5% (w/v) aqueous oriental mustard extract and incubated at 4 °C to 21 °C for 21 d. For inhibitor combination tests, Salmonella Typhimurium 02:8423 and L. monocytogenes 2–243 were individually inoculated in Mueller Hinton broth containing the mustard extract with either or both 0.2% (w/v) malic acid and 0.2% (w/v) EDTA and incubated at 10 °C or 21 °C for 10 to 14 d. Mustard extract inhibited growth of the L. monocytogenes cocktail at 4 °C up to 21 d (2.3 log₁₀ CFU/mL inhibition) or at 10 °C for 7 d (2.4 log₁₀ CFU/mL inhibition). Salmonella spp. viability was slightly, but significantly reduced by mustard extract at 4 °C by 21 d. Although hydrolysis of sinigrin in mustard extract by both pathogens was 2 to 6 times higher at 21 °C than at 4 °C to 10 °C, mustard was not inhibitory at 21 °C, perhaps because of the instability of its hydrolysis product (allyl isothiocyanate). At 21 °C, additive inhibitory effects of mustard extract with EDTA or malic acid led to undetectable levels of S. Typhimurium and L. monocytogenes by 7 d and 10 d, respectively. At 10 °C, S. Typhimurium was similarly susceptible, but combinations of antimicrobials were not more inhibitory to L. monocytogenes than the individual agents.     

A new mathematical model for integrating all incidence matrices in multi-dimensional cellular manufacturing system

In the past several years, many studies have been carried out on cellular manufacturing based on a two-dimensional machine–part incidence matrix. Since workers have important role in doing jobs on machines, assignment of workers to cells becomes a crucial factor for fully utilization of cellular manufacturing systems. In this paper, an attempt is made to solve cell formation problem and minimize the number of voids and exceptional elements in a three dimensional (cubic) machine–part–worker incidence matrix. The proposed mathematical model captures the capability of workers in doing different jobs. To demonstrate the effectiveness of the proposed model, the solution of some test problems is compared with the literature method.     

Preparation of lead (Pb) X-ray fluorescence reference materials for the EPA Pb monitoring program and the IMPROVE network using an aerosol deposition method

X-ray fluorescence (XRF) is a commonly used analytical method to quantify lead (Pb), a toxic element, in atmospheric aerosol. The commercially available reference materials used for calibrating XRF do not mimic the concentrations and filter materials of particulate matter (PM) monitoring networks. In this study, we described an aerosol deposition method to generate Pb reference materials (RMs) over a range of concentrations to serve several purposes for the US Environmental Protection Agency (EPA) and Interagency Monitoring of PROtected Visual Environments (IMPROVE) monitoring networks including laboratory auditing, federal equivalency method evaluation, and calibration and quality control of XRF instruments. The RMs were generated using a laboratory-built aerosol chamber equipped with a federal reference sampler at concentration levels ranging from 0.0125 to 0.70 μg/m³. XRF analysis at UC Davis was demonstrated to be equivalent to a US and EU reference method, inductively coupled plasma—mass spectrometry (ICP-MS), for measuring Pb on RMs following a methodology described in the United States and international standards. The Pb concentrations on subsets of the RMs were verified by three other XRF laboratories with different analyzers and/or quantification methods and were shown to be equivalent to the UC Davis XRF analysis. The generated RMs were demonstrated to have short and long-term stability, satisfying an additional requirement of reference materials.

Copyright © 2016 American Association for Aerosol Research