Adsorption of Alkanethiols on Gold Surfaces: PM-IRRAS Study of the Influence of Terminal Functionality on Alkyl Chain Orientation

The present paper focuses on a simplified method to study the orientation and the anisotropy of two different alkanethiols self-assembled monolayers on gold surfaces. The alkanethiols of interest vary only by their terminal functionalities (COOH and COOCH₃), thus allowing one to highlight the influence of these ending chemical groups on the final orientation of the adsorbed molecules. 11-Mercaptoundecanoic acid [HS-(CH₂)₁₀-COOH] and the methyl-11-mercaptoundecanoate [HS-(CH₂)₁₀-COOCH₃] were grafted under adequate conditions to obtain a high grafting density on gold substrates. These latter, before and after the alkanethiol adsorption, were analyzed mainly by the polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) technique to access orientation angles, and by atomic force microscopy (AFM) to check the homogeneity of the grafted layer.

By applying an original PM-IRRAS simplified method, the results showed an orientation closer to the normal of the surface plane in the case of the acid thiol compared with the ester one, which is probably because of the lateral hydrogen bonds established between the adjacent COOH functions. This method offers a direct and simple way to quantify the orientation angles in the alkanethiol nanofilms.     

Texturation of model clay materials using tape casting and freezing

The present work aimed to investigate the processing of textural clay based materials using tape casting together with freezing. Two model raw materials were used, namely: BIP kaolin from France and ABM montmorillonite from Mediterranean region. The mixtures of both clays were studied, whereby, the amount of montmorillonite was 0, 5, 10, 20 or 50 mass%. After tape casting, the as-obtained green bands were frozen into liquid nitrogen, lyophilized and then fired at 1050 °C or 1200 °C.The amount of montmorillonite appeared as a critical parameter that controls the cohesion of the dry products. For montmorillonite content ≥20 mass%, the products exhibited multiple cracks after lyophilisation. With lower montmorillonite content, the cohesion of the dry products was satisfactorily and a macroscopic cross-linked surface texturation was observed. After calcination at 1050 °C or 1200 °C, the texturation appeared well defined. Moreover, calcination at 1200 °C increased the densification of products and the occurrence of a glassy phase was noted.The combination of both tape casting and freezing (freeze tape casting) is a promising way to develop various clay-based and composites materials exhibiting unique microstructure organization and characteristics with potential application in the field sustainable and environmentally friendly filtration, adsorption or catalysis.     

Low temperature synthesis of <Emphasis Type="Italic">Manganese tungstate</Emphasis> nanoflowers with antibacterial potential: Future material for water purification

Pure water is the fundamental requisite for human life. The water has been recycled naturally but not in an adequate amount for consumption. Nanotechnology with extraordinary applications provides competent ways for the decontamination of contaminated water. In the present study MnWO₄ nanoflowers endorsed with inherent antibacterial activity were successfully synthesized by facile hydrothermal approach. XRD, SEM, EDX spectroscopy and UVDRS were used to characterize the as-synthesized nanoflowers. Gram negative Escherichia coli ATCC 52922 bacterium was used as model organism to test antibacterial activity of as-synthesized MnWO₄ nanoflowers. This study was conducted to optimize minimum concentration of MnWO₄ nanoflowers and maximum contact time required to achieve complete inactivation of bacteria present in contaminated water. Minimum inhibitory concentration (MIC) of MnWO₄ nanoflowers was found to be 10 μg/ml. The assessment and interpretation of bacterial viability was done using dual fluorescent staining. The synthesized 3D-nanoflowers were found as potent bactericides. Thus, MnWO₄ nanoflowers emerged to be very good future material for disinfection of biological pollutants present in the contaminated water reservoirs and as an anti-biofouling agent.     

Chitosan hydrogel‐coated cotton fabric: Antibacterial,pH‐responsiveness,and physical properties

In this work, chitosan hydrogel has been synthesized and used to impart pH‐sensitivity and antimicrobial finish to cotton fabric. In order to enhance the incorporation rate of hydrogel, anionic, and cationic activation of the textile surface was applied and then compared. The antibacterial activity of the fabric was then studied. The results revealed an enhancement of the antibacterial activities of the modified fabrics against Escherichia coli, Listeria monocytogene, and Staphylococcus aureus bacteria's. The capacity of material to respond to pH change was studied and confirmed using contact angle method. The anionic fabric treated with hydrogel showed a better pH‐responsiveness. Scanning electron microscopic testing results has also confirmed that the deposition of hydrogel was clearly better with the anionic activation. The characteristics of breathability of the fabrics were analyzed. The results show that the moisture management behavior of the finished materials is significantly better than the control one. Although the permeability to air has reduced by 10%, the permeability to water vapor remained practically unchanged. Furthermore, the effects of the antibacterial finishing on the physical properties of the cotton fabrics were also investigated. It was established that the functionalized samples have changed structure parameters, thickness, air permeability, tensile strength, and resistance to wrinkles. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46645.     

A new application of Hydroxyapatite extracted from dromedary bone: Adsorptive removal of Congo red from aqueous solution

The aim of this paper is to evaluate the efficiency of the natural hydroxyapatite powder for anionic dye (Congo red) elimination from water and optimization of adsorption process parameters that are contact time (0-360 min), solution pH (4-9), initial dye concentration (400-2400 mg/l), and adsorbent dosage (0.4-20 g/l). Natural hydroxyapatite with high surface area was prepared from animal agriculture waste dromedary bone. X-ray diffraction, transmission electron microscopy, transform infrared spectroscopy, and elemental analysis characterizations of the powder prepared show a hexagonal structure, the irregular form of hydroxyapatite and presence of other elements as trace element. The results of adsorption tests demonstrated the high efficiency of natural hydroxyapatite for removal of Congo red from water solution whose maximum experimental capacity adsorption of Congo red by natural hydroxyapatite is 900 mg/g at pH 4.5, equilibrium time 240 min and adsorbent dosage 2 g/l. According to the correlation coefficient value, the pseudo-second order kinetic model identified the sorption mechanism of pollutant used on natural hydroxyapatite. The Freundlich isotherm is the best representative theoretical model of the dye molecules’ adsorption on the natural hydroxyapatite support.     

Antibacterial activity of quaternary ammonium salt grafted cotton

Cotton having good antibacterial activity can be obtained without the need for a binding chemical as a cross linker or the need for chemically pre-treated antibacterial agent. The procedure of synthesis consists in grafting an alkali-cellulose fibre by a quaternary ammonium salt: Epoxy propyltrimethylammonium chloride (EPTMAC). The characterization of grafted cotton (EPTMAC-Cotton) has been targeted on the nitrogen and the methyl group in the ammonium graft structure, by using some analytical techniques, such as infrared, NMR spectroscopy, and volumetric measurement. The antibacterial activity of EPTMAC-Cotton has been studied using four kinds of bacterial stains (Escherichia coli 25922, Pseudomonas aeruginosa 27853, Staphylococcus aureus 259223 and Salmonella LT2DT104 typhimirium). An optimization of conditions of culture medium has been carried out for the bacterial strain for which the modified cotton presents the best antibacterial activity. This optimization is achieved while varying the most important parameters influencing the bacterial growth. We have chosen the pH and the sodium chloride concentration as variable parameters, and we have applied an experiment plant, in order to consider all possible combinations of experiments, and therefore, to estimate the effect of each factor, as well as the effect of their interaction. It has been noticed that a quaternary ammonium salt (EPTMAC) is an efficient antibacterial agent, especially against salmonella in alkaline medium slightly concentrated in salt, and its action depends, in some manner, on the whitening procedure of cotton.     

Atmospheric flows of semi-volatile organic pollutants to the Great Lakes estimated by the United States' Integrated Atmospheric Deposition and Canada's Great Lakes Basin Monitoring and Surveillance Networks

We calculated the wet and dry deposition, vapor absorption, and volatilization flows (in kg/yr) of seven polychlorinated biphenyls (PCBs), nine organochlorine pesticides, and two polycyclic aromatic hydrocarbons (PAHs) into and out of the Great Lakes during 2010–2015 (inclusive). Particle, vapor, and precipitation concentrations from five rural and remote stations (one site on each lake) and two urban sites, operated by the United States and Canada, were used for the flow calculations. Output from the water to the air was the most important process for PCBs, chlordanes, and p,p′-DDE. The flows of endosulfan, p,p′-DDT, and phenanthrene were dominated by vapor absorption from the air to the water. The flow of benzo[a]pyrene was controlled by wet and dry deposition to the water. The flows of the hexachlorocyclohexanes (HCHs) into and out of the lakes were about equal, indicating air-water equilibrium for these compounds. Among the lakes, Lakes Superior and Erie had the highest input and output flows. The input and output flows for the five lakes were decreasing with halving times of 1–10 years and 10–40 years, respectively. Most chemicals had seasonal variations in their flows, with maximum inputs in the summer and maximum outputs in the fall. The flows of PCBs and PAHs into Lakes Michigan and Erie were associated with Chicago and Cleveland, respectively. Combining our data with previous data over the period 1992–2015, we estimated that the input flows of most of these chemicals have significantly decreased, but the output flows do not show consistent trends.     

The diversity and distribution of freshwater macrophytes in the wedian of the mountainous northern Oman

The paper reports the first study of diversity and distribution of freshwater macrophytes in the wedian (plural of wadi = seasonal river) of the northern Al Hajar Mountain range in Oman. Fifteen lentic habitats in the wedian were surveyed. The number of species, their growth forms and abundance were recorded in the studied habitat of each wadi. In all, 41 species belonging to 14 families and 32 genera were collected. Of these 37 species were emergent and four were submergent. Poaceae was the most diverse emergent family with 17 species. Phragmites australis was the most common emergent followed by Typha domingensis. Among submerged macrophytes, Chara vulgaris had higher frequency of occurrence with low abundance followed by Potamogeton distinctus with relatively high abundance. Floristic diversity was estimated using species richness (Margalef’s D), general diversity (Shannon–Wiener H′), evenness (Pielous’s EH), and dominance (Berger–Parker d) indices for each study habitat. Principal component analysis was used to evaluate the variability using four indices. PC1 and PC2 explained 98.18% of the variability. Some habitats in different watersheds exhibited similar species diversity, but some in the same watershed were different. Baseline data on the freshwater macrophytes in northern Oman are provided here.     

Electrolyte—solvent interaction in the dipolar aprotic solvent dimethyl sulphoxide at 25°C

Conductance measurements are reported for s-alkylisothiouronium bromide, iodide and picrate salts in the dipolar aprotic solvent DMSO at 25°C. The data were analysed by Fuoss's equation (1975–1980) for 1:1 electrolytes, from which the values of Λ₀, the Gurney's cosphere diameter R and K_A are obtained. The results are discussed in the light of the recorded values of the constants K_R and K_S and the free energy term G_s.