Autocatalytic dissolution of Pb in HNO3

The reaction between Pb and HNO₃ has been investigated using the thermometric technique. Weight-loss measurements on the reaction were also obtained. As the HNO₃ concentration is increased from 5×10^–2 to 4mol l^–1, the corrosion rate increases. This is shown thermometrically by a substantial increase in the maximum temperature attained, T _m, as well as a decrease in the time, t, required for reaching T _m. Dissolution of Pb in HNO₃ is proposed to take place according to an autocatalytic mechanism. Passivation sets were detected in solutions 11 mol l^–1 HNO₃. A parallel indication between the thermometric technique and weight-loss measurements was obtained. The rate-determining step of the autocatalytic process involves HNO₂ in dissolution of Pb in HNO₃. This is supported by the results of addition of hydrazine to the solution. This additive raises the maximum measured temperature, without affecting the corresponding time necessary to reach it. The effect of addition of NaNO₂, NaNO₃, NaCl, Na₂SO₄, NaH₂PO₄ and NaClO₄ on the reaction number, RN, of Pb in 4 mol l^–1 HNO₃ was examined. Only NaNO₂ accelerates the dissolution reaction while the other salts show as inhibition effect. It was found that these additives inhibit dissolution due to the displacement of some cathodic depolarizing components, as NO₂, from the active sites on the metal surface. The effect of addition of HCl, H₂SO₄, HClO₄ and H₃PO₄ on the reaction number, RN, of Pb in 4 mol l^–1 HNO₃ was also investigated. The observed acceleration and retardation of the dissolution of Pb was found to be dependent on both the concentration and nature of anions of the extra acids added.     

Energy Metabolites as Biomarkers in Ischemic and Dilated Cardiomyopathy

With more than 25 million people affected, heart failure (HF) is a global threat. As energy production pathways are known to play a pivotal role in HF, we sought here to identify key metabolic changes in ischemic- and non-ischemic HF by using a multi-OMICS approach. Serum metabolites and mRNAseq and epigenetic DNA methylation profiles were analyzed from blood and left ventricular heart biopsy specimens of the same individuals. In total we collected serum from n = 82 patients with Dilated Cardiomyopathy (DCM) and n = 51 controls in the screening stage. We identified several metabolites involved in glycolysis and citric acid cycle to be elevated up to 5.7-fold in DCM (p = 1.7 × 10⁻⁶). Interestingly, cardiac mRNA and epigenetic changes of genes encoding rate-limiting enzymes of these pathways could also be found and validated in our second stage of metabolite assessment in n = 52 DCM, n = 39 ischemic HF and n = 57 controls. In conclusion, we identified a new set of metabolomic biomarkers for HF. We were able to identify underlying biological cascades that potentially represent suitable intervention targets.     

Fabrication,Electrical and Photovoltaic Characterizations of SnSb2S4/n-Si Heterojunction

Silicon - An inexpensive spray pyrolysis technique was effectively used to form a p-type SnSb2S4 thin film on n-type Si wafer for the first time to produce SnSb2S4/n-Si heterojunction. The...     

Probing the Structural and Antimicrobial Study on a Sol–Gel Derived Velosef-Loaded Bioactive Calcium Magneso-Silicate Xerogel

Silicon - The nature of the opening silicate- based surface affects the chemical interaction, spectroscopic and antimicrobial efficiency. The aim of this approach was to evaluate the spectroscopic...     

Modern Template Design and Biological Evaluation of Cephradine-loaded Magnesium Calcium Silicate Nanocomposites as an Inhibitor for Nosocomial Bacteria in Biomedical Applications

Silicon - Magnesium calcium silicate nanostructures (MCSNS) loaded with (0.0, 0.6, 0.9, and 1.2 wt%) of Cephradine-drug consisting of mesoporous particles were functionally prepared by sol-gel...     

An Eco-Friendly Approach to the Control of Pathogenic Microbes and Anopheles stephensi Malarial Vector Using Magnesium Oxide Nanoparticles (Mg-NPs) Fabricated by Penicillium chrysogenum

The discovery of eco-friendly, rapid, and cost-effective compounds to control diseases caused by microbes and insects are the main challenges. Herein, the magnesium oxide nanoparticles (MgO-NPs) are successfully fabricated by harnessing the metabolites secreted by Penicillium chrysogenum. The fabricated MgO-NPs were characterized using UV-Vis, XRD, TEM, DLS, EDX, FT-IR, and XPS analyses. Data showed the successful formation of crystallographic, spherical, well-dispersed MgO-NPs with sizes of 7–40 nm at a maximum wavelength of 250 nm. The EDX analysis confirms the presence of Mg and O ions as the main components with weight percentages of 13.62% and 7.76%, respectively. The activity of MgO-NPs as an antimicrobial agent was investigated against pathogens Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans, and exhibited zone of inhibitions of 12.0 ± 0.0, 12.7 ± 0.9, 23.3 ± 0.8, 17.7 ± 1.6, and 14.7 ± 0.6 mm respectively, at 200 µg mL⁻¹. The activity is decreased by decreasing the MgO-NPs concentration. The biogenic MgO-NPs exhibit high efficacy against different larvae instar and pupa of Anopheles stephensi, with LC50 values of 12.5–15.5 ppm for I–IV larvae instar and 16.5 ppm for the pupa. Additionally, 5 mg/cm² of MgO-NPs showed the highest protection percentages against adults of Anopheles stephensi, with values of 100% for 150 min and 67.6% ± 1.4% for 210 min.     

Preparation,Properties and Applications of the Hybrid Organic/Inorganic Nanocomposite Based on Nanoporous Carbon Matrix

Journal of Inorganic and Organometallic Polymers and Materials - Nanoporous carbon matrix was prepared by the sol–gel process from pyrogallol-formaldehyde (PF) mixtures in water using picric...     

A Multi-Channel Pulse-Coded Multiplexing and Demodulating Telemetry System

A multiplexing, demodulating, and recording telemetry system designed to process multiple pulse-coded temperature channels is described. The system provides complete control of recording and multiplexing sequences and timing, and gives a single analog signal in response to each sample of pulse-coded data. It identifies all channels and indicates to a computer when a new data sample is to be processed. The system is self-calibrating to maintain accuracy over extended data collection periods, and is inexpensive.     

Miniemulsion and conventional emulsion copolymerization of styrene and butadiene: Effect of process on gel content

The properties of styrene/butadiene copolymers obtained by conventional emulsion and miniemulsion polymerizations were studied. Thin layer chromatography with flame ionization detection was used to determine the gel fraction of the copolymer in the latex particles as a function of conversion. It was found that the gel formation began at a higher conversion in the miniemulsion polymerization when compared with that in the conventional process. Also, a lower glass transition temperature was noted at the lowest conversion sampled (～25%), implying a higher initial butadiene monomer concentration within the nucleated miniemulsion monomer droplets when compared with particles formed conventionally. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4616–4622, 2006     

Antimicrobial protection of cotton and cotton/polyester fabrics by radiation and thermal treatments. I. Effect of ZnO formulation on the mechanical and dyeing properties

Cotton and cotton/polyester fabrics were treated against microbial attack by applying a formulation based essentially on ZnO under high‐energy radiation and thermal curing. To achieve the homogeneity and the reactivity of the treating formulation, a binder (Impron MTP) and a dispersing agent (Setamol WS) were used with ZnO. The antimicrobial property of the fabrics was evaluated, in terms of mechanical properties, by a soil burial test. Moreover, the effect of antimicrobial finishing on the dyeing properties in terms of color strength was investigated. It was found that the best composition that affords the best antimicrobial protection to cotton fabrics contains 2% ZnO, 2% binder, and 1% dispersing agents. For the cotton/polyester blend, the best results were achieved at the same conditions except the ZnO was 1%. It was found that the treatment under the effect of electron‐beam irradiation is better than that of gamma irradiation and thermal curing. The results showed that when the finishing process was carried out before dyeing with a reactive dye, it affects the color strength rather than performing the finishing after the dyeing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1129–1137, 2003