Mechanical analysis of hollow fiber membrane integrity in water reuse applications

In order to gain insight into membrane fiber failure (i.e., loss of integrity), properties of five hollow fiber membranes and four hollow fiber modules were evaluated. Specifically, membrane material, membrane symmetry, fiber modulus of elasticity, fiber diameter and thickness, module potting technique, module flow pattern (inside-out or outside-in), and coliform breakthrough were investigated. The approach combined evaluation of the above properties with mathematical modeling of structure-fluid interactions to comprehensively evaluate the properties most important for maintaining hollow fiber membrane integrity. Tensile strength testing revealed that the strongest fiber was an asymmetric polyacrylonitrile membrane fiber. The weakest fiber was a symmetric polyethylene membrane fiber. Pilot plant testing on the four membrane modules revealed that membrane symmetry may be a more important factor than potting technique for hollow fiber integrity. Results from the SEM and tensile testing were used as input to a finite element analysis model used to evaluate time-dependent structure-fluid interactions. It was found that additional stresses at the juncture of the potting material and the hollow fiber membranes exist. These stresses likely lead to the formation of fractures.     

Ozonation of Humic Substances: Effects on Molecular Weight Distributions of Organic Carbon and Trihalomethane Formation Potential

Four different sources of humic substances were studied to determine the effects of ozonation on molecular weight-distributions, based on dissolved organic carbon (DOC) and trihalomethane formation potential (THMFP). Solutions of two soil-derived fulvic acids and a one soil-derived humic acid, as well as dissolved organic matter (DOM) associated with a natural water source were studied. Both gel permeation chromatography (GPC) and ultrafiltration (UF) were employed to define apparent molecular weight (AMW). Applied ozone doses ranged from 2.0 to 2.5 mg O₃/mg DOC. Overall samples of untreated and ozonated waters, as well as individual molecular weight fractions, were characterized according to DOC, UV absorbance, and THMFP. Ozonation resulted in a significant disappearance of higher AMW material with a corresponding increase in lower AMW material. Although little overall reduction in DOC concentration was observed, significant overall reductions in UV absorbance and THMFP levels were observed.     

Communicating with Faculty,Staff, and Students Using Library Blogs: Results from a Survey of Academic Health Sciences Libraries

This study investigated use and management of blogs in academic health sciences libraries. Quantitative and qualitative data were collected with a questionnaire distributed to bloggers and administrators representing 22 libraries self-identified as using blogs to publish library newsletters. Perceived barriers to use of blogs included lack of patron awareness and technical issues. Blogs were viewed as easy to use by librarians and blogs are used to promote licensed resources. Blogs do not replace other interactions with librarians, but in the future, could be used to develop a community, provide tools for learning, and increase visibility of the library.     

A case study of factor influencing role improvisation in crisis response teams

Common characteristics of crisis situations are ambiguous and unplanned for events. The need for improvised roles can therefore be an imperative factor for the success of an operation. The aim of this study is to deepen the understanding of the processes taking place during improvised work “as it happens”. A case study of a crisis management team at work is presented and provides an in-depth analysis of the information and communication flow of persons acting in improvised roles, including contextual factors influencing the task at hand. The analysis suggests that three main factors lay behind decreased performance by the team when some of its members were forced to take on roles for which they lacked professional training; lack of language skills, lack of domain knowledge and insufficient organizational structure of the tasks. Based on the observations from this case study, we suggest three ways of improving a team’s performance and hence resilience when forced to improvise due to lack of personnel in one or more required competence areas. These are training to take on the responsibility for tasks or roles outside ones professional area of specialization, developing formal routines for changes in roles and tasks and developing and using tools and routines for information sharing.     

QuickBird and Hyperion data analysis of an invasive plant species in the Galapagos Islands of Ecuador: Implications for control and land use management

In the Galapagos Islands of Ecuador, one of the greatest threats to the terrestrial ecosystem is the increasing number and areal extent of invasive species. Increased human presence on the islands has hastened the introduction of plant and animal species that threaten the native and endemic flora and fauna. Considerable research on invasive species in the Galapagos Islands has been conducted by the Charles Darwin Foundation. We complement that work through a spatially- and spectrally-explicit satellite assessment of an important invasive plant species (Psidium guajava — guava) on Isabela Island that integrates diverse remote sensing systems, data types, spatial and spectral resolutions, and analytical and image processing approaches. QuickBird and Hyperion satellite data are processed to characterize the areal extent and spatial structure of guava through the following approaches: (1) QuickBird data are classified through a traditional pixel-based approach (i.e., an unsupervised classification approach using the ISODATA algorithm), as well as an Object-Based Image Analysis (OBIA) approach; (2) multiple approaches for spectral “unmixing” of the Hyperion hyper-spectral data are assessed to construct spectral end-members from QuickBird data using linear and non-linear mixture modeling approaches; and (3) landscape pattern metrics are calculated and compared for the pixel-based, object-based, and spectral unmixing approaches. The spectral–spatial characteristics of guava are interpreted relative to management strategies for the control of guava and the restoration of natural ecosystems in the Galapagos National Park.     

Noble Metal Ion-Directed Assembly of 2D Materials for Heterostructured Catalysts and Metallic Micro-Texturing

Assembling 2D-material (2DM) nanosheets into micro- and macro-architectures with augmented functionalities requires effective strategies to overcome nanosheet restacking. Conventional assembly approaches involve external binders and/or functionalization, which inevitably sacrifice 2DM's nanoscale properties. Noble metal ions (NMI) are promising ionic crosslinkers, which can simultaneously assemble 2DM nanosheets and induce synergistic properties. Herein, a collection of NMI–2DM complexes are screened and categorized into two sub-groups. Based on the zeta potentials, two assembly approaches are developed to obtain 1) NMI-crosslinked 2DM hydrogels/aerogels for heterostructured catalysts and 2) NMI–2DM inks for templated synthesis. First, tetraammineplatinum(II) nitrate (TPtN) serves as an efficient ionic crosslinker to agglomerate various 2DM dispersions. By utilizing micro-textured assembly platforms, various TPtN–2DM hydrogels are fabricated in a scalable fashion. Afterward, these hydrogels are lyophilized and thermally reduced to synthesize Pt-decorated 2DM aerogels (Pt@2DM). The Pt@2DM heterostructures demonstrate high, substrate-dependent catalytic activities and promote different reaction pathways in the hydrogenation of 3-nitrostyrene. Second, PtCl₄ can be incorporated into 2DM dispersions at high NMI molarities to prepare a series of PtCl₄–2DM inks with high colloidal stability. By adopting the PtCl₄–graphene oxide ink, various Pt micro-structures with replicated topographies are synthesized with accurate control of grain sizes and porosities.     

2,4-Diamino-5-(2'-arylpropargyl)pyrimidine derivatives as new nonclassical antifolates for human dihydrofolate reductase inhibition

Dihydrofolate reductase (DHFR) has been a well-recognized target for the development of therapeutics for human cancers for several decades. Classical inhibitors of DHFR use an active transport mechanism to gain access to the cell; disabling this mechanism creates a pathway for resistance. In response, recent research focuses on nonclassical lipid-soluble DHFR inhibitors that are designed to passively diffuse through the membrane. Here, a new series of propargyl-linked antifolates are investigated as potential nonclassical human DHFR inhibitors. Several of these compounds exhibit potent enzyme inhibition with 50% inhibition concentration values under 500 nM. Molecular docking investigations show that the compounds maintain conserved hydrogen bonds between the pyrimidine ring and the enzyme as well as form van der Waals interactions with critical residues in the active site. Interestingly, the most potent compound, 2,4-diamino-5-(3-(3,4,5-trimethoxyphenyl)prop-1-ynyl)-6-ethylpyrimidine (compound 35), is 3500-fold more potent than trimethoprim, a potent inhibitor of bacterial DHFR but weak inhibitor of human DHFR. The two structural differences between compound 35 and trimethoprim show that the propargyl linkage and the substitution at C6 of the pyrimidine ring are critical to the formation of contacts with Thr 56, Ser 59, Ile 60, Leu 22, Phe 31 and Phe 34 and hence, to enhancing potency. The propargyl-linked antifolates are efficient ligands with a high ratio of potency to the number of non-hydrogen atoms and represent a potentially fruitful avenue for future development of antineoplastic agents.