Finite element modeling of resistive surface layers by micro-contact impedance spectroscopy

Micro-contact impedance spectroscopy (MCIS) is potentially a powerful tool for the exploration of resistive surface layers on top of a conductive bulk or substrate material. MCIS employs micro-contacts in contrast to conventional IS where macroscopic electrodes are used. To extract the conductivity of each region accurately using MCIS requires the data to be corrected for geometry. Using finite element modeling on a system where the resistivity of the surface layer is at least a factor of ten greater than the bulk/substrate, we show how current flows through the two layers using two typical micro-contact configurations. This allows us to establish if and what is the most accurate and reliable method for extracting conductivity values for both regions. For a top circular micro-contact and a full bottom counter electrode, the surface layer conductivity (σ_s) can be accurately extracted using a spreading resistance equation if the thickness is ~10 times the micro-contact radius; however, bulk conductivity (σ_b) values can not be accurately determined. If the contact radius is 10 times the thickness of the resistive surface, a geometrical factor using the micro-contact area provides accurate σ_s values. In this case, a spreading resistance equation also provides a good approximation for σ_b. For two top circular micro-contacts on thin resistive surface layers, the MCIS response from the surface layer is independent of the contact separation; however, the bulk response is dependent on the contact separation and at small separations contact interference occurs. As a consequence, there is not a single ideal experimental setup that works; to obtain accurate σ_s and σ_b values the micro-contact radius, surface layer thickness and the contact separation must all be considered together. Here we provide scenarios where accurate σ_s and σ_b values can be obtained that highlight the importance of experimental design and where appropriate equations can be employed for thin and thick resistive surface layers.     

Characterization of products from fast and isothermal hydrothermal liquefaction of microalgae

We investigated nonisothermal (fast) and nominally isothermal hydrothermal liquefaction (HTL) of Nannochloropsis sp. microalgae for the production of biocrude. Biocrude yields ranged from 36 to 45 wt % (dry weight), with fast HTL with low mass loading giving the highest yield. This condition also gave the biocrude with the lowest heating value, which indicates there are compromises to be made between biocrude quantity and quality. The aqueous phase and biocrude product fractions were characterized using elemental analysis and Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR MS). This detailed level of analysis identified more than 30,000 unique molecular products. The aqueous phase products included compounds with the same molecular formulae as known herbicides, which may inform efforts in genetic engineering of algae and/or bacteria for cultivation on the aqueous phase. This detailed molecular‐level characterization provides some clues regarding the types of reactions that may take place during HTL. © 2016 American Institute of Chemical Engineers AIChE J, 62: 815–828, 2016     

Genotype and Growing Environment Effects on the Tocopherols and Fatty Acids of <Emphasis Type="Italic">Brassica napus</Emphasis> and <Emphasis Type="Italic">B. juncea</Emphasis>

The effects of genotype and growing environment on the tocopherols and fatty acids (FA) of experimental Brassica juncea and B. napus breeding lines were investigated. For both species, with the exception of a few genotypes, the concentration ratio of γ-tocopherols to α-tocopherol was practically constant. The genotype influenced the tocopherol concentration in B. napus, and to a lesser degree, B. juncea. The environment also had a similar effect, and a positive correlation existed between the daily maximum temperature and the α-tocopherol concentration in B. napus. Genotype effects on the FA composition were significant for the conventional but not for Clearfield or triazine tolerant traits of B. napus. The genotype had no effect on the FA of the B. juncea genotypes. In contrast, the growing environment had a significant influence on the FA composition of both species with apparent influence from temperature and rainfall. For both species, the concentration of γ-tocopherol as well as total tocopherols was inversely related to the 18:3 concentration, which could have resulted from opposite and independent effects of temperature on the two variables. No relationship existed between the concentrations of tocopherol and the remaining unsaturated FA 18:1 and 18:2. The positional distribution of unsaturated FA within the oil triacylglycerol was a function of their total concentration.     

Automated fixture configuration using projective geometry approach

The geometric and topological specification of a workpiece boundary is usually represented in a specific data format in a CAD database. To retrieve a set of workpiece data, to analyse its shape in addition to the machining requirements, and to determine the proper fixture configuration accordingly, are not trivial tasks when a part has a complicated shape. The real challenge is to recognise and synthesise the shape of a workpiece from its data representation. Consequently, the decision for fixturing can be made when the shape of a workpiece and the relationship of the shape and the fixturing configuration can be derived by a systematic methodology. In this paper, a projective spatial occupancy enumeration (PSOE) approach is applied as a representational and manipulating scheme for developing algorithms in automatic fixture configuration. The workpiece is projected onto the working plane of the fixture baseplate. A 2D projection is defined as a matrix of cells which can represent a workpiece with an arbitrary shape. Using a discrete search based upon the matrix of cells, the fixture types and their locations are generated according to a set of heuristic algorithms. This work is a generalisation and extension of previous works for prismatic parts. The same methodology is equally applicable in general robot grasping.     

Phenolics of Vaccinium berries and other fruit crops

The concentrations and profiles of phenolics of selected fruit crops common in the Western diet, including several Vaccinium species, were examined to better understand how these crops may be useful sources of phenolic phytochemicals. Vaccinium fruit had a high phenolic concentration compared to non‐Vaccinium fruit. Some Vaccinium fruit were particularly rich in certain phenolic subgroups, especially anthocyanins and pro‐anthocyanidins. Among the pro‐anthocyanidin oligomers measured using fluorometric and mass spectroscopic detection, the trimers and tetramers were most abundant, while pro‐anthocyanidins with a degree of polymerization greater than 8 were least abundant. As biomedical studies determine which phenolic structures are associated with particular bioactivities, information on the phenolic concentration and profile of selected species will be useful in developing specific uses for fruit crops in human health. Methods were compared to assess the usefulness of simpler versus more sophisticated means of phenolic analysis. The phenolic components of fruit extracts were purified approximately 20‐fold, and not qualitatively altered, by C18 solid‐phase extraction. However, fruit extracts obtained from C18 solid‐phase extraction differed in their relative abundance of phenolic components. Colorimetric and HPLC‐DAD measures of phenolic concentration were correlated (R² = 0.79), as was pro‐anthocyanidin concentration detected fluorometrically and by mass spectrometry (R² = 0.44). Copyright © 2007 Crown in the right of Canada and Society of Chemical Industry     

Veteran interest in family involvement in PTSD treatment.

[Correction Notice: An erratum for this article was reported in Vol 7(3) of Psychological Services (see record 2010-17074-004). The copyright for the article was listed incorrectly. This article is in the Public Domain. The online version has been corrected.] The present study examined interest in family involvement in treatment and preferences concerning the focus of family oriented treatment for veterans (N = 114) participating in an outpatient Veterans Affairs outpatient posttraumatic stress disorder (PTSD) program. Most veterans viewed PTSD as a source of family stress (86%) and expressed interest in greater family involvement in their treatment (79%). These results suggest the need to consider increasing family participation in the clinical care of individuals with PTSD and to develop specialized family educational and support services for this population. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Stigma and barriers to care in soldiers postcombat.

The present study examined the effects of leadership and unit cohesion on mental health stigma and perceived barriers to care. A sample of 680 soldiers from combat support units were surveyed 3 months after their return from combat operations in Iraq. The survey included scales on psychological symptoms and perceptions of leader behaviors and unit cohesion, as well as items assessing stigma and barriers to care. The sample was used to test the independent and interactive effects of leadership and unit cohesion on soldiers’ perceptions of stigma and barriers to care. Analyses yielded significant interaction effects between leadership and cohesion in predicting stigma and barriers to care, while controlling for the effects of mental health symptoms. Soldiers who rated their leaders more highly and who reported higher unit cohesion also reported lower scores on both stigma and perceived barriers to care. Thus, positive leadership and unit cohesion can reduce perceptions of stigma and barriers to care, even after accounting for the relationship between mental health symptoms and these outcomes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fibre diffraction in the analysis of filamentous virus structure

In many plant and bacterial viruses, a filamentous nucleocapsid makes up the entire virus particle. These viruses usually form fibres naturally, but they do not crystallize. Fibre diffraction has therefore been the method of choice for structural studies, aided in recent years by cryo-electron microscopy (EM) and solid state nuclear magnetic resonance (ssNMR). Filamentous viruses, particularly tobacco mosaic virus (TMV), have been important in developing fibre diffraction methods, and fibre diffraction allowed TMV to be among the first virus structures determined. Structures of several viruses related to TMV and several filamentous bacterial viruses have been determined at resolutions of 3?Å or better, and lower resolution structures have been determined by fibre diffraction, sometimes in conjunction with other methods, for many other, unrelated, filamentous viruses.     

Battlemind debriefing and battlemind training as early interventions with soldiers returning from iraq: Randomization by platoon.

Researchers have found that there is an increase in mental heath problems as a result of military-related traumatic events, and such problems increase in the months following return from combat. Nevertheless, researchers have not assessed the impact of early intervention efforts with this at-risk population. In the present study, the authors compared different early interventions with 2,297 U.S. soldiers following a year-long deployment to Iraq. Platoons were randomly assigned to standard postdeployment stress education, Battlemind debriefing, and small and large group Battlemind training. Results from a 4-month follow-up with 1,060 participants showed those with high levels of combat exposure who received Battlemind debriefing reported fewer posttraumatic stress symptoms, depression symptoms, and sleep problems than those in stress education. Small group Battlemind training participants with high combat exposure reported fewer posttraumatic stress symptoms and sleep problems than stress education participants. Compared to stress education participants, large group Battlemind training participants with high combat exposure reported fewer posttraumatic stress symptoms and lower levels of stigma and, regardless of combat exposure, reported fewer depression symptoms. Findings demonstrate that brief early interventions have the potential to be effective with at-risk occupational groups. (PsycINFO Database Record (c) 2010 APA, all rights reserved)