HYSIM软件模拟天然气加工工艺流程的研究(Ⅰ)——系统中无循环物流

本文结合大庆油田天然气矿场加工实际生产装置,讨论了应用HYSIM烃类工艺模拟软件对含有不确定组分的体系进行流程模拟计算的特点、塔设备严格模拟计算过程中输入规定的选择、以及多股流换热器和吸附脱水工艺的模拟计算方法。     

一种简易可靠的射频激光调制器

采用ＰＩＮ电调衰减器、ＴＬ４９４等元件组成了射频（ＲＦ）大功率ＣＯ２激光调制器，调制频率、占空比和调制度单独可调。给出了电路的工作原理和测试结果。     

三塘湖盆地上古生界烃源岩镜质组反射率异常研究

镜质组反射率是评价有机质成熟度的重要指标 ,然而由于地质因素和测试技术的原因 ,镜质组反射率测量值常与预计值有一定的偏差。在三塘湖盆地上古生界烃源岩中 ,可以观察到镜质组反射率的局部增强和镜质组反射率的抑制。局部增强多分布在上二叠统的烃源岩中 ,主要与火山活动有关。这种反射率的增强在平面上分布广泛 ,但纵向上影响范围较小。反射率的抑制是在上古生界烃源岩含有较高含量的腐泥组分背景下产生的。用氢指数模板方法对抑制进行了校正 ,抑制的幅度最大可达 0 .3%     

关于Vague集的模糊熵及其构造

本文分析了Vague集的性质,给出了将Vague集变换为Fuzzy集的转换函数,并讨论了其性质。分析了关于Vague集的模糊熵的直观特性,在此基础上我们给出了Vague集的模糊熵的定义。最后给出了一个关于Vague集的模糊熵的构造方法。     

An implementation of the vectorial finite element analysis ofanisotropic waveguides through a general-purpose PDE software

This paper reports on the major progress in the development of an intelligent, interactive and automated system, based on the vector finite element method, and implemented within PDE/Protran problem solving environment. The system is known as WAVEGIDE and was originally developed by the authors for an efficient solution of inhomogeneous dielectric waveguides. In this paper, it has been further extended to the solution of anisotropic waveguiding structures. With our system, through an interactive “question-and-answer” session, which requires minimal knowledge of programming, the problem can be defined using high level PDE/Protran commands. It can then be simply and quickly solved by the main processor within this intelligent environment. To verify the convergence and accuracy of the present approach, numerical results (with respect to the grid density and element order) for a rectangular metallic waveguide half filled with dielectric are given and compared with other finite element methods. Numerical results for an anisotropic dielectric rectangular waveguide are also presented. These results clearly illustrate the accuracy and the ease of use of the modified WAVEGIDE program     

蚕庄金矿倾斜采场的地压研究

本文使用工程地质、室内试验及数值分析的方法对蚕庄金矿的倾斜矿房的地压活动规律进行了研究，得出了一些有价值的结论。     

FBOLES—outline of a frequency-based on-line expert system approach for fault diagnoses in nuclear power plants

The basic concept of a novel frequency-based on-line expert system (FBOLES) approach for on-line fault diagnoses in nuclear power plants has been presented previously. This paper reports further progress, and includes how to express the uncertainties of expert opinion in knowledge-bases and propagate then in inferences, and how to deal with imperfect knowledge-bases. It also describes the main elements of FBOLES and outlines how the system works under complex conditions including the dynamic behavior of signals during accidents, multiple failures, and on-line changes of plant operation mode. Its ability to diagnose root causes of accidents has been tested using the main steam and feedwater condensate systems of a full-scale, three-loop, 950 MW nuclear power plant simulated by the Tsinghua simulator. So far the results seem good.     

纸张用有机硅抗水剂的制备

采用氨基硅油、十二烷基三甲氧基硅烷、甲基三乙氧基硅烷配成11种抗水剂,用于纸张的抗水处理.通过渗透法和接触角法测试发现,有机硅抗水剂对实验选择的9种纸张均有明显的抗水效果;其中采用氨基硅油配制的抗水剂效果最好,经其处理的生宣纸与空白样相比,接触角由完全润湿提高到125°,渗透时间由0提高到18 s.最佳应用工艺为:将氨基硅油配制成质量分数为2.041%的甲苯溶液,按照10g/m2的涂布量喷涂于纸张表面,自然晾干3～5天至恒定质量.     

中山古镇风韵独具

特殊的自然地理环境和社会、经济、文化的影响,形成了重庆市江津中山镇鲜明的地域文化特色,这些特色突出地表现在城镇形态格局、街巷空间布局、建筑空间开合等方面。本文对此进行了深入的研究。     

Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry