Land inputs of trace metals, major elements, particulate organic carbon and suspended solids to an industrial coastal bay of the NE Atlantic

Rivers, streams and municipal and industrial effluents flowing into the Ferrol Ria (NW Spain) were analyzed for dissolved and particulate trace elements (Cd, Cu, Pb, Zn), particulate major elements (Al, Fe, Si), particulate organic carbon and nitrogen (POC and PON), and total suspended solids. Trace metal clean techniques were applied. Mean annual fluxes of these components were calculated. Dissolved trace metal concentrations in the major freshwater inputs were found to be within typical values for uncontaminated rivers: Cd: 0.020-0.035 nM; Cu: 11.7-19.2 nM; Pb: 0.40-0.71 nM and Zn: 18-54 nM. Two sources of suspended particulate matter (SPM) were observed: (i) a detrital SPM, which becomes more important at high river discharges, with metal concentrations tending to lithogenic values; (ii) an organic- and metal-rich SPM, which becomes dominant at low discharges. Municipal and industrial effluents in the northern shore, despite of constitute a minor freshwater contribution to the bay, were responsible for more than 50% of total inputs of Cu, Cd, Pb, Zn, POC and PON. The fluxes of trace metals obtained for the Ferrol Ria are in the range of other inhabited world semi-enclosed embayments.     

Ni(II) removal from aqueous effluents by silylated clays

Industrial effluents discharged in water bodies without proper treatment contribute to water pollution by potentially toxic metal ions. Considering that the legislation for discarding of such effluents is getting more and more rigorous, the development of efficient processes for the treatment of industrial effluents is of great interest. A study on the capacity of metal retention by silylated-modified clays was carried out with the aim to evaluate the efficiency of this application. K10 clay was modified with 3-mercaptopropyltrimethoxysilane (MPS) and tested in batch removal processes. We investigated the sorption process, obtaining isotherms and kinetics of adsorption and the influence of pH, the desorption process and the metal recovery. It was observed that the modified clay presents fast retention and good capacity of both adsorption and desorption. The use of K10/MPS as adsorbent shows to be more adequate in effluent final polishment, after a conventional treatment, or when Ni(II) initial concentration in the effluent is low enough to permit its adequate removal by conventional methods.     

FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde

In this work, poly (vinyl alcohol) (PVA) hydrogels with different degree of hydrolysis (DH) were prepared by chemical crosslinking with glutaraldehyde (GA). The nanostructure of the resulting hydrogels was investigated by Fourier Transform Infrared Spectroscopy (FTIR) and Synchrotron small-angle X-ray scattering characterization (SAXS). In vitro tests were performed by swelling ratio assays in different pH solutions. The infrared spectra of the crosslinked PVA showed absorption bands of the acetal bridges resulted from the reaction of the GA with the OH groups from PVA. Also the FTIR spectroscopy was used to determine the crystallinity of the PVA film based on the relative intensity of the vibration band at 1141 cm^− 1. The results have showed an increase of hydrogel crystallinity with higher DH of PVA. SAXS patterns have clearly indicated important modifications on the PVA semicrystalline structure when it was crosslinked by GA. The swelling ratio was significantly reduced by chemically crosslinking the PVA network. PVA-derived hydrogel with chemically modified network was found to be pH-sensitive, indicating a high potential to be used in drug delivery polymer system.     

A statistical view of iterative methods for linear inverse problems

In this article, we study the problem of recovering the unknown solution of a linear ill-posed problem, via iterative regularization methods, from a statistical point of view. The basic purpose of the paper is to develop adaptive model selection techniques for determining the regularization parameters, i.e., the iteration index. We assume observations are taken over a fixed grid and we consider solutions over a sequence of finite-dimensional subspaces. Based on concentration inequalities techniques, we derive non-asymptotic optimal upper bounds for the mean square error of the proposed estimator.     

Low-dimensional, hinged bar-code metal oxide layers and free-standing, ordered organic nanostructures from turbostratic vanadium oxide

Both low-dimensional bar-coded metal oxide layers, which exhibit molecular hinging, and free-standing organic nanostructures can be obtained from unique nanofibers of vanadium oxide (VO(x)). The nanofibers are successfully synthesized by a simple chemical route using an ethanolic solution of vanadium pentoxide xerogel and dodecanethiol resulting in a double bilayered laminar turbostratic structure. The formation of vanadium oxide nanofibers is observed after hydrothermal treatment of the thiol-intercalated xerogel, resulting in typical lengths in the range 2-6 microm and widths of about 50-500 nm. We observe concomitant hinging of the flexible nanofiber lamina at periodic hinge points in the final product on both the nanoscale and molecular level. Bar-coded nanofibers comprise alternating segments of organic-inorganic (thiols-VO(x)) material and are amenable to segmented, localized metal nanoparticle docking. Under certain conditions free-standing bilayered organic nanostructures are realized.     

Friction Coefficient Measurement of Hydrogel Materials on Living Epithelial Cells

Soft biomaterials are often used in applications that involve contact and relative motion against biological tissues, as well as complicated and variable environments. The friction coefficient of these contacts involving living human cells is of key importance in the analysis and success of these devices. This work measures the contacting friction coefficient between soft hydrogel biomaterial surfaces against live human corneal epithelial cells using a custom micro-tribometer. The friction coefficients were of the order of μ = 0.03 for contacts that did not cause gross destruction of the cell layer. Damage to the confluent cell layer was assessed using a Trypan blue stain with optical microscopy. This damage was quantified statistically using image-processing software. The damage was also correlated to in situ friction measurements, with the lowest friction values seen on undamaged cells and higher friction on damaged regions.     

Interpersonal styles of chronically depressed outpatients: Profiles and therapeutic change.

Theoretical accounts posit that chronically depressed individuals are perceived as hostile and/or submissive, which compromises their ability to satisfy their interpersonal needs. The current study assessed the interpersonal tenets of McCullough's (2000) chronic depression theory and examined change in interpersonal functioning following McCullough's treatment for chronic depression (viz., Cognitive-Behavioral Analysis System of Psychotherapy; CBASP). Data derive from a randomized 12-week clinical trial that compared the efficacy of CBASP, nefazodone, and their combination for chronic depression. To assess patients' interpersonal impacts, CBASP therapists completed the Impact Message Inventory (IMI) following an early and a late session. IMI data were compared to normative and clinical comparison samples to assess depression-related interpersonal profiles and clinically significant change in interpersonal functioning. As predicted, chronically depressed patients were initially perceived as more submissive and hostile than the comparison groups. Patients' interpersonal impacts on their therapists changed in adaptive, theoretically predicted ways by the end of CBASP treatment, either with or without medication. Individual-level clinical significance data were less robust. The findings generally substantiate McCullough's interpersonal theory and provide preliminary evidence of change in interpersonal impacts following treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Rapid physicochemical characterization of innovative fucoidan/fructan powders by ATR–FTIR

Functional food has been highly demanded lately because of its benefits in counteracting diseases. Fucoidan and agave fructan are ingredients that enhance the growth of beneficial bacteria in the gut (prebiotics). This mixture has great potential to develop innovative products but it has never been explored before. Because of fucoidan is more expensive than agave fructan, the innovative proposed mixture is vulnerable to adulteration. This research was aimed to assess the accuracy of Fourier transform infrared spectroscopy with attenuated total reflectance (ATR–FTIR) coupled with chemometrics to identify and predict concentration of both polysaccharides in powder mixtures (0–100%). Absorption bands at 1240–1255 and 836–840 cm^?1 were attributed to fucoidan and a strong peak at ~ 936 cm^?1 confirmed the fructan presence. Peak areas were best fitted into linear models (\({\text{R}}_{\text{adj}}^{2}\) ≥ 0.92, RMSE ≤ 3.54%). This achievement may be useful to certificate ingredients contained in fucoidan–fructan mixtures, preventing adulteration.     

Reference Material for the Determination of Polychlorodibenzo-<Emphasis Type="Italic">p</Emphasis>-dioxins,Polychlorodibenzo-furans,and Polychlorinated Biphenyls in Fish: Production Process,Homogeneity, and Stability

The presence of dibenzo-p-dioxins, polychlorinated dibenzofurans, and polychlorinated biphenyls in food is an important consideration for food safety, especially in fish matrices that are susceptible to bioaccumulation of those compounds from marine environments. In this context, the production of a reference material (RM) for this analytical scope is of great importance for ensuring the reliability of the results generated by monitoring programs. A lyophilized material was produced by spiking tilapia fillets with 29 compounds, and the material was evaluated based on the potential for using it as a certified reference material (CRM) or in proficiency testing (PT) schemes. A pilot experiment was performed to evaluate the incorporation of the analytes in tilapia fillets using standards prepared in nonane and in fish oil. The process yield was approximately 16% for both conditions, but higher mean recoveries were achieved with fish oil. The tilapia fillets were processed, and a portion of this bulk was spiked and then homogenized. The spiked and unspiked portions were frozen prior to lyophilization. Each freeze-dried portion was homogenized and sieved, and then, the portions were mixed, packed, and stored under refrigeration. The material was considered homogeneous for all analytes based on the criteria established for PT. Of the tested analytes, 27 were found to be stable in the short-term design (p > 0.05) when the material was kept at 45 ± 2 °C for 9 days. Long-term stability was evaluated at 2, 4, 6, and 8 months, and 22 of the analytes were found to be stable through up to 4 months of storage based on the criteria defined in references related to both the production of CRM and PT. The contributions of the homogeneity and stability in the short- and long-term uncertainties were estimated and indicated the adequacy of the material for use as a reference for trueness experiments.     

Penetration of resin‐based materials into initial erosion lesion: A confocal microscopic study

The application of resin‐based materials is an alternative of treatment for eroded lesions. Nevertheless, there are no studies about the penetration of these materials into eroded lesion, which might affect its adhesion. Therefore, this study evaluated the penetration of four resin‐based materials, with and without enamel etching. By using an in vitro protocol, types of treatment were studied at five levels (AdheSE^®, Tetric N‐Bond^®, Single Bond 2^®, Helioseal Clear^®, Icon^®) and types of enamel etching in two levels (with and without). Materials were stained with 0.02 mg/mL ethanolic solution of tetramethylrhodamine isothiocyanate. Bovine enamel samples (4 × 4 mm) were immersed in 0.01 M HCl, pH 2.3, for 30 seconds to produce initial eroded lesions. Afterward, the materials were applied on half of sample enamel surface following the manufacturer's instructions. On the other half of sample, the materials were applied without etching the enamel. Materials penetration into the enamel was assessed by Confocal Laser Scanning Microscopy on reflection and fluorescence modes. The penetration depth (PD) was measured using ImageJ software. Data were analyzed by two‐way ANOVA and Tukey test (P < 0.05). Regardless of the material, etched enamel resulted in higher PD than non‐etched (P < 0.05). Icon^® showed the highest PD in enamel followed by Helioseal Clear^® (P < 0.05), with significant difference between them (P < 0.05) and no difference was found among AdheSE^®, Tetric N‐Bond^®, and Single Bond 2^® (P > 0.05). It can be concluded that prior enamel etching increased the materials penetration into eroded enamel and the Icon^®—infiltrant presented highest penetration. Microsc. Res. Tech. 79:72–80, 2016. © 2015 Wiley Periodicals, Inc.