Synthesis and Photopolymerization of Tween 20 Methacrylate/N-vinyl-2-Pyrrolidone Blends

Poly(oxyethylene 20 sorbitan) monolaurate (Tween® 20) methacrylates were synthesized by coupling methacryloyl chloride (MeOCl) to Tween 20 in the presence of 4-(N,N-dimethylamino) pyridine, using THF as a solvent, in order to investigate their suitability as precursors for photopolymerizable hydrogels in tissue engineering applications. The degree of substitution could be controlled by adjusting the molar ratio of MeOCl and Tween 20, giving three different monomers: Tween 20 monomethacrylate, Tween 20 dimethacrylate and Tween 20 trimethacrylate. Combined ¹ H NMR and MALDI-TOF MS confirmed these monomers to be of high purity and to have polydispersities less than 1.3. It was shown that aqueous solutions of the monomers were photoactive, all the methacrylate groups reacting within 30 minutes exposure to a UV light intensity of 145 mW/cm². Aqueous Tween 20 trimethacrylate was then combined with N-vinyl-2-pyrrolidone (NVP), giving tough copolymer hydrogels on photopolymerization, whose swelling ratios and swelling rates could be tuned by varying the Tween 20 trimethacrylate content. The use of a flexible spacer with a multifunctional monomer gives a permanent three-dimensional network, whilst maintaining degrees of swelling of between 60 and 85%, with potential for a wide range of biological and non-biological applications.     

Surface spin slips in thin dysprosium films

We report a theoretical investigation of new magnetic phases of thin dysprosium films. At the surfaces, the balance between exchange and anisotropy energies favors the alignment of spins along the basal plane easy axis directions. Near the Curie temperature, the helimagnetic phase is strongly modified, allowing surface spins to lock into the basal plane anisotropy easy directions. As the temperature raises, we find transitions to other surface lockin patterns, which are tunable by external field strengths of a few hundred milli-Oersteds.     

Synthesis of WS2 and MoS2 fullerene-like nanoparticles from solid precursors

Inorganic fullerene-like WS₂ and MoS₂ nanoparticles have been synthesized using exclusively solid precursors, by reaction of the corresponding metal oxide nanopowder, sulfur and a hydrogen-releasing agent (NaBH₄ or LiAlH₄), achieved either by conventional furnace heating up to ∼900 °C or by photothermal ablation at far higher temperatures driven by highly concentrated white light. In contrast to the established syntheses that require toxic and hazardous gases, working solely with solid precursors permits relatively safer reactor conditions conducive to industrial scale-up.      

Addressing imperfect maintenance modelling uncertainty in unavailability and cost based optimization

Optimization of testing and maintenance activities performed in the different systems of a complex industrial plant is of great interest as the plant availability and economy strongly depend on the maintenance activities planned. Traditionally, two types of models, i.e. deterministic and probabilistic, have been considered to simulate the impact of testing and maintenance activities on equipment unavailability and the cost involved. Both models present uncertainties that are often categorized as either aleatory or epistemic uncertainties. The second group applies when there is limited knowledge on the proper model to represent a problem, and/or the values associated to the model parameters, so the results of the calculation performed with them incorporate uncertainty. This paper addresses the problem of testing and maintenance optimization based on unavailability and cost criteria and considering epistemic uncertainty in the imperfect maintenance modelling. It is framed as a multiple criteria decision making problem where unavailability and cost act as uncertain and conflicting decision criteria. A tolerance interval based approach is used to address uncertainty with regard to effectiveness parameter and imperfect maintenance model embedded within a multiple-objective genetic algorithm. A case of application for a stand-by safety related system of a nuclear power plant is presented. The results obtained in this application show the importance of considering uncertainties in the modelling of imperfect maintenance, as the optimal solutions found are associated with a large uncertainty that influences the final decision making depending on, for example, if the decision maker is risk averse or risk neutral.     

Severe hemorrhage because of delayed iliac vein rupture after dialysis catheter placement: Is it preventable?

Mechanical complications of femoral catheterization for hemodialysis include pseudoaneurysm, arteriovenous fistulae, neurological injury, and vessel perforation. With regard to the latter, severe hemorrhage is a rare but devastating and potentially fatal complication. We report the case of a 76-year-old female who underwent femoral catheterization for hemodialysis using ultrasound guidance. The first hemodialysis session was conducted without incident. Unfortunately, inadvertent injury and delayed perforation of the iliac vein resulted in severe hemorrhage and retroperitoneal hematoma. Surgical repair was performed. The patient was asymptomatic after the procedure and was discharged 15 days later. Based on this case and a review of the literature, we present mechanisms and ways to prevent this complication.     

Label-free identification of single dielectric nanoparticles and viruses with ultraweak polarization forces

Label-free detection of the material composition of nanoparticles could be enabled by the quantification of the nanoparticles' inherent dielectric response to an applied electric field. However, the sensitivity of dielectric nanoscale objects to geometric and non-local effects makes the dielectric response extremely weak. Here we show that electrostatic force microscopy with sub-piconewton resolution can resolve the dielectric constants of single dielectric nanoparticles without the need for any reference material, as well as distinguish nanoparticles that have an identical surface but different inner composition. We unambiguously identified unlabelled ~10 nm nanoparticles of similar morphology but different low-polarizable materials, and discriminated empty from DNA-containing virus capsids. Our approach should make the in situ characterization of nanoscale dielectrics and biological macromolecules possible.     

Activated paper surfaces for the rapid hybridization of DNA through capillary transport

The development of low-cost, accurate, and equipment-free diagnostic tests is crucial to many clinical, laboratory, and field applications, including forensics and medical diagnostics. Cellulose fiber-based paper is an inexpensive, biodegradable, and renewable resource, the use of which as a biomolecule detection matrix and support confers several advantages compared to traditional materials such as glass. In this context, a new, facile method for the preparation of surface functionalized papers bearing single-stranded probe DNA (ssDNA) for rapid target hybridization via capillary transport is presented. Optimized reaction conditions were developed that allowed the direct, one-step activation of standard laboratory filters by the inexpensive and readily available bifunctional linking reagent, 1,4-phenylenediisothiocyanate. Such papers were thus amenable to subsequent coupling of amine-labeled ssDNA under standard conditions widely used for glass-based supports. The intrinsic wicking ability of the paper matrix facilitated rapid sample elution through arrays of probe DNA, leading to significant, detectable hybridization in the time required for the sample liquid to transit the vertical length of the strip (less than 2 min). The broad applicability of these paper test strips as rapid and specific diagnostics in "real-life" situations was exemplified by the discrimination of amplicons generated from canine and human mitochondrial and genomic DNA in mock forensic samples.     

Characterization and three-dimensional reconstruction of synthetic bone model foams

Sawbones© open-cell foams with different porosity grades are being used as synthetic bone-like models for in vitro mechanical and infiltration experiments. However, a comprehensive characterization of these foams is not available and there is a lack of reliable information about them. For this reason two of these foams (Refs. 1522-505 and -507) have been characterized at the micro architectural level by scanning electron microscopy, computed tomography and image data analysis. BoneJ open software and ImageJ open software were used to obtain the characteristic histomorphometric parameters and the three dimensional virtual models of the foams. The results showed that both foams, while having different macro porosities, appeared undistinguishable at the micro scale. Moreover, the micro structural features resembled those of osteoporotic rather than healthy trabecular bone. It is concluded that Sawbones© foams behave reasonably as synthetic bone-like models. Consequently, their use is recommended for in vitro comparison purposes of both mechanical and infiltration testing performed in real vertebra. Finally, the virtual models obtained, which are available under request, can favour comparisons between future self-similar in vitro experiments and computer simulations.     

Usability evaluation methods for mobile serious games applied to health: a systematic review

Universal Access in the Information Society - This paper aims to present the results of a systematic review focused on usability evaluation methods for serious games (SG) of mobile devices...     

Designing robust volunteer-based evolutionary algorithms

This paper tackles the design of scalable and fault-tolerant evolutionary algorithms computed on volunteer platforms. These platforms aggregate computational resources from contributors all around the world. Given that resources may join the system only for a limited period of time, the challenge of a volunteer-based evolutionary algorithm is to take advantage of a large amount of computational power that in turn is volatile. The paper analyzes first the speed of convergence of massively parallel evolutionary algorithms. Then, it provides some guidance about how to design efficient policies to overcome the algorithmic loss of quality when the system undergoes high rates of transient failures, i.e. computers fail only for a limited period of time and then become available again. In order to provide empirical evidence, experiments were conducted for two well-known problems which require large population sizes to be solved, the first based on a genetic algorithm and the second on genetic programming. Results show that, in general, evolutionary algorithms undergo a graceful degradation under the stress of losing computing nodes. Additionally, new available nodes can also contribute to improving the search process. Despite losing up to 90 % of the initial computing resources, volunteer-based evolutionary algorithms can find the same solutions in a failure-prone as in a failure-free run.