Thermal stability and high-temperature wear of Ti–TiN and TiN–CrN nanomultilayer coatings under self-mated conditions

Ti–TiN and TiN–CrN nanomultilayers were thermally stable retaining uniform and sharp layer interfaces up to 24 h at 773 K, without any oxidation or phase transformation accompanying each individual layer. Decreasing the multilayer spacing resulted in an increase in the hardness in both cases. The coating hardness was found to be independent of the substrate type, when applied on HS718, Ti64 and HCHCr substrates. In scratch testing, the multilayers displayed a better resistance to the onset of failure, as compared to the monolayer TiN. The substrate plasticity played an important role in determining the coating failure mode. Self-mated wear tests revealed the CrN–TiN system to exhibit the best wear behaviour, both at room temperature and at 773 K. The Ti–TiN coatings are more accommodative with all three substrates, as compared to TiN–CrN and TiN.     

Towards an effective integration of cellular users to the structured Peer-to-Peer network

Integration of cellular users into the peer-to-peer (P2P) network is still in limbo due to limitations caused by heterogeneity, mobility and time-varying capacities of the wireless channel. If traditional Chord is employed to include users from the cellular networks, users under the same base station scatter in logical topology randomly. In this paper, we present a novel cellular Chord (C-Chord) P2P system that integrates the cellular users into the well-established structured P2P network in a topology-aware fashion. C-Chord offers the cellular users a choice of downloading contents either from the Internet peers at a faster rate or from other cellular users from the same base station avoiding the Internet data penalty. We also incorporate the peer selection module based on stable marriage problem that chooses the appropriate candidate from the discovered potential senders. We conduct extensive simulations to evaluate the performance of the proposed C-Chord P2P system and the peer selection module. Simulation results show that the path-length per lookup query is smaller than that of the traditional Chord system. Overhead due to renewal of routing information is also smaller for the cellular users in the C-Chord system. We also measure the throughput at the cellular receivers to analyze the effects of selecting peers either from same base station or from outside the Internet gateway. Throughput also increases dramatically due to an intelligent selection of peers among the potential senders.     

An intelligent hybrid approach for hepatitis disease diagnosis: Combining enhanced k‐means clustering and improved ensemble learning

In real world, the automatic detection of liver disease is a challenging problem among medical practitioners. The intent of this work is to propose an intelligent hybrid approach for the diagnosis of hepatitis disease. The diagnosis is performed with the combination of k‐means clustering and improved ensemble‐driven learning. To avoid clinical experience and to reduce the evaluation time, ensemble learning is deployed, which constructs a set of hypotheses by using multiple learners to solve a liver disease problem. The performance analysis of the proposed integrated hybrid system is compared in terms of accuracy, true positive rate, precision, f‐measure, kappa statistic, mean absolute error, and root mean squared error. Simulation results showed that the enhanced k‐means clustering and improved ensemble learning with enhanced adaptive boosting, bagged decision tree, and J48 decision tree‐based intelligent hybrid approach achieved better prediction outcomes than other existing individual and integrated methods.     

Design of Dual-Gate P-type IMOS Based Industrial Purpose Pressure Sensor

Silicon - In this treatise, we have proposed a Single Material Gate–Dual Gate Impact Ionization Metal Oxide Semiconductor (SMG DG-IMOS) based Pressure Sensor. The pressure sensor has the most...     

Enhancing the design and performance of a gate-all-around (GAA) charge plasma nanowire field-effect transistor with the help of the negative-capacitance technique

A gate-all-around charge plasma nanowire field-effect transistor (GAA CP NW FET) device using the negative-capacitance technique is introduced, termed the GAA CP NW negative-capacitance (NC) FET. In the face of bottleneck issues in nanoscale devices such as rising power dissipation, new techniques must be introduced into FET structures to overcome their major limitations. Negative capacitance is an efficient effect that can be incorporated into a device to enhance its performance for low-power applications and help to reduce the operating voltage. The Landau–Khalatnikov equation can be applied in such cases to obtain the effective bias. To determine the effects of negative capacitance, lead zirconate titanate (PZT) ferroelectric material, a ceramic material with perovskite properties, is adopted as a gate insulator. This approach diminishes the supply voltage and reduces the power dissipation in the device. Excluding their polarization properties, ferroelectric materials are similar to dielectric materials, and PZT offers abundant polarization with improved reliability and a higher dielectric capacitance. Without proper tuning of the thickness of the PZT material, hysteresis behavior mat occur. Hence, the thickness of the PZT material (t_FE) is an essential parameter to optimize the device performance and achieve a reduced threshold voltage for the GAA CP NW NC-FET device proposed herein. Furthermore, varying the thickness of the PZT ferroelectric material can also enhance the performance. When using the highest values of t_FE, improved outcomes with an analogously lower operating voltage are observed. The effects of varying t_FE on the performance characteristics of the device including the drain current, transconductance, polarized charge, etc. are also interpreted herein.

     

Kinetics of droplet growth in liquid—liquid phase separation of polymer—diluent systems: experimental results

Liquid—liquid thermally induced phase separation of the polymer—diluent system isotactic poly(propylene)—diphenyl ether was studied under an optical microscope. It was found that as the system phase separated, droplets of a diluent-rich phase formed within a polymer-rich matrix. These droplets grew in size and decreased in number by a process known as coarsening. The scaling exponent relating droplet diameter and time was determined. The scaling exponent was found to be a strong function of the droplet phase volume fraction, and this strong dependence on volume fraction was relatively insensitive to temperature. The influence of the ratio of interfacial tension between the phases and the viscosity of the matrix phase was less significant on the growth rate of the droplets.     

Effect of coupling agents on thermal and electrical properties of mica/epoxy composites

The influence of 3-aminopropyltriethoxysilane, 3-glycidyloxypropyltrimethoxysilane, and neoalkoxytric(dioctyl pyrophosphato)zirconate on thermal expansion behavior, dielectric strength, and arc resistance of mica/epoxy composites has been investigated. The addition of mica up to 30% resulted in the reduction of thermal expansion with respect to neat resin. However, the coefficient of linear thermal expansion of 30% mica treated with aminosilane was the least among the various coupling agent-coated filler/epoxy composites. Mica (30%)/epoxy composites showed the highest dielectric strength values (26 kV/mm), but the highest arc resistance was obtained in zirconate-treated mica (30%)/epoxy composite. © 1995 John Wiley & Sons, Inc.     

State of the academic field of IS in India

The field of information systems (IS) remains ill-defined, facing problems of recognition and identity crisis. Several papers and debates have been dedicated on this topic for over three decades. The focus of these debates have largely centered on the state of the IS field in Americas and Europe and with a limited study conducted in the Asia–Pacific context. This study attempts to assess the field in the Indian context and highlight the challenges and issues faced by IS faculties in India. Based on literature survey of the seminal papers in the field, we identified the salient topics of interest to IS researchers: identity of the IS field; diversity of the field; research approaches, methods and rigor; reference disciplines; journals and conferences; and IS course and curriculum. A two-phase study was carried out to explore the interest generated by the IS field in India. In the first phase, secondary data review of leading business schools in India was carried out to understand their focus on IS as an academic discipline. In the second phase, we conducted interviews of IS researchers from the premium business schools in India. In our study, we analyze the research focus of IS faculties in B-schools in India, analyze the composition of the faculty pool and the nature of research work undertaken by them. Our study points at the restricted focus of IS researchers in India around a few narrow areas, with a significant breadth of topics not being explored for research. We found the identity struggle of the field to be prominent, which was further compounded by the limited number of active, IS researchers. The growing importance of qualitative techniques in IS research, the challenges of developing a sound base in multiple reference disciplines and the need for making IS course interesting for business school students were some of the other significant observations. Our study also highlighted the paradox of the success of the IT industry in India leading to reduced enrollment of IS courses in B-Schools. We conclude by providing recommendations to B-school deans and directors.     

Dual polarized triple band hybrid MIMO cylindrical dielectric resonator antenna for LTE2500/WLAN/WiMAX applications

In this communication, triple band hybrid multi‐input–multi‐output (MIMO) cylindrical dielectric resonator antenna (CDRA) with high isolation is examined. The proposed MIMO antenna includes two symmetric folded microstrip line feeding structures along with CDRA at two different ends of substrate. Two inverted L‐shaped strips on the ground plane are used to enhance the isolation (S₁₂ < ?15 dB) as well as to generates 2.7 GHz frequency band. Metallic strip on the ground plane act as an electromagnetic reflector and also enhance the isolation between two antennas (S₁₂ < ?20 dB). Archetype of proposed MIMO antenna design has been fabricated and tested to validate the simulated results. The proposed antenna operates at three different frequency bands 2.24–2.38 GHz, 2.5–3.26 GHz, and 4.88–7.0 GHz (S₁₁ < ?6 dB) with the fractional bandwidth 6.06%, 26.4%, and 35.7%, respectively. Folded microstrip lines generate path delay between the electric field lines and originate circular polarization characteristics in the frequency range 5.55–5.75 GHz with the fractional bandwidth of 3.55%. In order to satisfy the different performance requirement of MIMO antenna such as envelop correlation coefficient, mean effective gain, effective diversity gain, peak gain are also examined. The proposed antenna is found suitable for LTE2500, WLAN, and WiMAX applications. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2016.