Noise analysis of double gate composite InAs based HEMTs for high frequency applications

Microsystem Technologies - The quantitative analysis of microwave noise available in the double gate (DG) high electron transistors of mobility (HEMT) is reported in this paper. For this analysis,...     

Design of Dual-Gate P-type IMOS Based Industrial Purpose Pressure Sensor

Silicon - In this treatise, we have proposed a Single Material Gate–Dual Gate Impact Ionization Metal Oxide Semiconductor (SMG DG-IMOS) based Pressure Sensor. The pressure sensor has the most...     

Kinetics of droplet growth in liquid—liquid phase separation of polymer—diluent systems: experimental results

Liquid—liquid thermally induced phase separation of the polymer—diluent system isotactic poly(propylene)—diphenyl ether was studied under an optical microscope. It was found that as the system phase separated, droplets of a diluent-rich phase formed within a polymer-rich matrix. These droplets grew in size and decreased in number by a process known as coarsening. The scaling exponent relating droplet diameter and time was determined. The scaling exponent was found to be a strong function of the droplet phase volume fraction, and this strong dependence on volume fraction was relatively insensitive to temperature. The influence of the ratio of interfacial tension between the phases and the viscosity of the matrix phase was less significant on the growth rate of the droplets.     

Rheology of Zirconia Suspensions in a Nonpolar Organic Medium

Three dispersants (stearic acid, oleic acid, and poly(12-hydroxystearic acid)) are compared for their ability to produce low-viscosity suspensions of zirconia in kerosene. Rheological measurements and sediment packing density measurements show that poly(12-hydroxystearic acid) is a better dispersant than stearic acid or oleic acid; this is explained in terms of the longer tail of the poly(12-hydroxystearic acid) surfactant molecule. The amount of dispersant can be optimized to reduce viscosity and yield point of the suspension, and to eliminate thixotropic hysteresis. The use of a dispersion medium of lower viscosity than the dispersant makes it easy to detect when complete monolayer coverage has been achieved. The loss of pseudoplasticity, brought about by a higher degree of deflocculation, can be recovered by increasing the volume fraction of solids of a suspension and this is beneficial in the plastic forming of ceramics. Rheological measurements showed that these suspensions reach a "critical state" above a critical shear stress (τ_c). This critical state is described by several parameters, i.e., the Bingham yield stress (τ_b), the plastic viscosity (ν_Pl), and the critical shear rate (γ_c), which are dependent on the volume fraction of solids.     

Effect of coupling agents on thermal and electrical properties of mica/epoxy composites

The influence of 3-aminopropyltriethoxysilane, 3-glycidyloxypropyltrimethoxysilane, and neoalkoxytric(dioctyl pyrophosphato)zirconate on thermal expansion behavior, dielectric strength, and arc resistance of mica/epoxy composites has been investigated. The addition of mica up to 30% resulted in the reduction of thermal expansion with respect to neat resin. However, the coefficient of linear thermal expansion of 30% mica treated with aminosilane was the least among the various coupling agent-coated filler/epoxy composites. Mica (30%)/epoxy composites showed the highest dielectric strength values (26 kV/mm), but the highest arc resistance was obtained in zirconate-treated mica (30%)/epoxy composite. © 1995 John Wiley & Sons, Inc.     

Active learning for on-road vehicle detection: a comparative study

In recent years, active learning has emerged as a powerful tool in building robust systems for object detection using computer vision. Indeed, active learning approaches to on-road vehicle detection have achieved impressive results. While active learning approaches for object detection have been explored and presented in the literature, few studies have been performed to comparatively assess costs and merits. In this study, we provide a cost-sensitive analysis of three popular active learning methods for on-road vehicle detection. The generality of active learning findings is demonstrated via learning experiments performed with detectors based on histogram of oriented gradient features and SVM classification (HOG–SVM), and Haar-like features and Adaboost classification (Haar–Adaboost). Experimental evaluation has been performed on static images and real-world on-road vehicle datasets. Learning approaches are assessed in terms of the time spent annotating, data required, recall, and precision.     

Direct Ink-Jet Printing of Vertical Walls

Direct jet printing can assemble ceramic powder into a three dimensional shape by firing droplets of ink through a nozzle to build a multiple layered structure. As with stereolithography and selective laser sintering, the surface texture is expected to witness the layered assembly. The ability to create vertical walls by direct ink-jet printing was explored using a test piece based on a maze. The structure and topography are discussed in terms of droplet spreading and drying.     

The performance of a hybrid routing intelligent algorithm in a mobile ad hoc network

End-to-end delay, power consumption, and communication cost are some of the most important metrics in a mobile ad hoc network (MANET) when routing from a source to a destination. Recent approaches using the swarm intelligence (SI) technique proved that the local interaction of several simple agents to meet a global goal has a significant impact on MANET routing. In this work, a hybrid routing intelligent algorithm that has an ant colony optimisation (ACO) algorithm and particle swarm optimisation (PSO) is used to improve the various metrics in MANET routing. The ACO algorithm uses mobile agents as ants to identify the most feasible and best path in a network. Additionally, the ACO algorithm helps to locate paths between two nodes in a network and provides input to the PSO technique, which is a metaheuristic approach in SI. The PSO finds the best solution for a particle’s position and velocity and minimises cost, power, and end-to-end delay. This hybrid routing intelligent algorithm has an improved performance when compared with the simple ACO algorithm in terms of delay, power consumption, and communication cost.     

State of the academic field of IS in India

The field of information systems (IS) remains ill-defined, facing problems of recognition and identity crisis. Several papers and debates have been dedicated on this topic for over three decades. The focus of these debates have largely centered on the state of the IS field in Americas and Europe and with a limited study conducted in the Asia–Pacific context. This study attempts to assess the field in the Indian context and highlight the challenges and issues faced by IS faculties in India. Based on literature survey of the seminal papers in the field, we identified the salient topics of interest to IS researchers: identity of the IS field; diversity of the field; research approaches, methods and rigor; reference disciplines; journals and conferences; and IS course and curriculum. A two-phase study was carried out to explore the interest generated by the IS field in India. In the first phase, secondary data review of leading business schools in India was carried out to understand their focus on IS as an academic discipline. In the second phase, we conducted interviews of IS researchers from the premium business schools in India. In our study, we analyze the research focus of IS faculties in B-schools in India, analyze the composition of the faculty pool and the nature of research work undertaken by them. Our study points at the restricted focus of IS researchers in India around a few narrow areas, with a significant breadth of topics not being explored for research. We found the identity struggle of the field to be prominent, which was further compounded by the limited number of active, IS researchers. The growing importance of qualitative techniques in IS research, the challenges of developing a sound base in multiple reference disciplines and the need for making IS course interesting for business school students were some of the other significant observations. Our study also highlighted the paradox of the success of the IT industry in India leading to reduced enrollment of IS courses in B-Schools. We conclude by providing recommendations to B-school deans and directors.     

A comparative study on the effect of promoter content of hydrodesulfurization catalysts at different evaluation scales

CoMo and NiMo supported Al₂O₃ catalysts have been investigated for hydrotreating of model molecule as well as industrial feedstock. Activity studies were carried out for thiophene and SRGO hydrodesulfurization (HDS) in an atmospheric pressure and batch reactor respectively. These activities on sulfided catalysts were evaluated as a function of promoter content [M/(M + Mo) = 0.30, 0.34, 0.39; M = Co or Ni] using fixed (ca. 8 wt.%) molybdenum content. The promoted catalysts were characterized by textural properties, XRD, and temperature programmed reduction (TPR). TPR spectra of the Co and Ni promoter catalysts showed that Ni promotes the easy reduction of Mo species compared with Co. With the variation of promoter content NiMo catalyst was found to be superior to CoMo catalyst for gas oil HDS, while at low-promoter content the opposite trend was observed for HDS of thiophene. The behavior was attributed to the several reaction mechanisms involved for gas oil HDS. A nice relationship was obtained for hydrodesulfurized gas oil refractive index (RI) and aromatic content, which corresponds to the Ni hydrogenation property.