Linux安全吗？

＂Linux安全吗？＂老实说,这是一个很有问题的问题,这就好比质疑我的财务和医疗记录是否安全,或是所有储存在＂云计算＂的数据是否安全？同样的,我要如何确定我的桌面计算机和我的手机是否都安全无虞？甚至更扩大一点来说,遍布我们生活周遭的智能电网,以及其他林林总总的公共基础设施,是否也都安全呢？我们是不是该拨个时间好好担心一下这些问题？     

The inverse problem utilizing the boundary element method for a nonstandard female torso

This paper proposes a new method of rapidly deriving the transfer matrix for the boundary element method (BEM) forward problem from a tailored female torso geometry in the clinical setting. The method allows rapid calculation of epicardial potentials (EP) from body surface potentials (BSP). The use of EPs in previous studies has been shown to improve the successful detection of the life-threatening cardiac condition--acute myocardial infarction. The MRI scanning of a cardiac patient in the clinical setting is not practical and other methods are required to accurately deduce torso geometries for calculation of the transfer matrix. The new method allows the noninvasive calculation of tailored torso geometries from a standard female torso and five measurements taken from the body surface of a patient. This scaling of the torso has been successfully validated by carrying out EP calculations on 40 scaled torsos and ten female subjects. It utilizes the BEM in the calculation of the transfer matrix as the BEM depends only upon the topology of the surfaces of the torso and the heart, the former can now be accurately deduced, leaving only the latter geometry as an unknown.     

On energy‐efficient aggregation routing and scheduling in IEEE 802.15.4‐based wireless sensor networks

In wireless sensor networks, continued operation of battery‐powered devices plays a crucial role particularly in remote deployment. The lifetime of a wireless sensor is primarily dependent upon battery capacity and energy efficiency. In this paper, reduction of the energy consumption of heterogeneous devices with different power and range characteristics is introduced in the context of duty scheduling, dynamic adjustment of transmission ranges, and the effects of IEEE 802.15.4‐based data aggregation routing. Energy consumption in cluster‐based networks is modeled as a mixed‐integer linear and nonlinear programming problem, an NP‐hard problem. The objective function provides a basis by which total energy consumption is reduced. Heuristics are proposed for cluster construction (Average Energy Consumption and the Maximum Number of Source Nodes) and data aggregation routing (Cluster‐based Data Aggregation Routing) such that total energy consumption is minimized. The simulation results demonstrate the effectiveness of balancing cluster size with dynamic transmission range. The heuristics outperform other modified existing algorithms by an average of 15.65% for cluster head assignment, by an average of 22.1% for duty cycle scheduling, and by up to 18.6% for data aggregation routing heuristics. A comparison of dynamic and fixed transmission ranges for IEEE 802.15.4‐based wireless sensor networks is also provided. Copyright © 2012 John Wiley & Sons, Ltd.     

Multigigabit transmission through rain in a dual polarizationfrequency reuse system: an experimental study

An experimental terrestrial link was set up for the purpose of evaluating very-high-data-rate communications in dual-polarization frequency reuse systems. Possible applications are in the field of satellite communications. Two 3.2-Gb/s signals using staggered quadriphase shift keying (SQPSK) were transmitted on opposite senses of circular polarization over a 7-km path located in Crane rain region D3. Performance degradation of the demodulator as a function of cross-polarization discrimination (XPD) was evaluated and found to closely match simulation predictions. However, the relationship between XPD and rain attenuation was found to be more complex than thought previously, displaying a relatively slowly varying hysteresis effect as well as significant interactions with characteristics of the receive antenna. The latter effect suggests that careful control of antenna characteristics may be required if such high-data-rate techniques are to be employed in space-ground links     

Criteria for local myocardial electrical activation: effects ofelectrogram characteristics

The ability of several variables to distinguish unipolar deflections due to local activation from those due to nonlocal activity is studied. A model of polyphasic deflections based on atrial recordings during reentrant tachycardia was used to facilitate distinction of local and distant activity by methods independent of the test variables. The performances of variables were assessed by comparing areas under receiver operating characteristic curves. Optimal thresholds of test variables were identified by maximizing statistics which corrected for the pretest probability of local activation. It was found that the greatest negative first derivative of the unipolar potential discriminated between local and distant ventricular signals, but performed less well than the ratio of the first derivative to the potential for distinguishing between local atrial signals and distant ventricular signals. A linear combination of the potential and the ratio of the first derivative and the potential performed well for all groups of signals studied. Optimal criteria for detecting local activation are discussed     

Comparison of calibration curve fitting methods in the determination of H2S mass fractions in natural gas by GC-SCD

This paper discusses metrologically the best practice regarding the calibration curves applied to H₂S mass fractions determination in natural gas by gas chromatography with sulfur chemiluminescence detection (GC-SCD). Three calibration curves were constructed by performing GC-SCD analysis of different H₂S gas standard concentrations (from 3 mg kg^?1 up to 500 mg kg^?1). These experimental curves are better fitted by an unweighted quadratic calibration curve considering ANOVA approach compared to ASTM D5504-12. Despite this, the obtained results show that these two different calibration curve approaches (ASTM and ANOVA) lead to comparable results. Hence, there are no significant statistical differences between these two approaches based on the hypothesis test applied. However, the quadratic calibration curve presents measurement uncertainties of H₂S mass fractions much lower than the ASTM approach.     

Influence of molecular weight and molecular weight distribution on the tensile properties of amorphous polymers

Tensile property data for polystyrene samples of varying polydispersity are correlated with various parametric measures of molecular weight. Traditional measures of molecular weight, such as M?_n, M?_w, and M?_z, are shown to be unable to account for the variation of tensile properties with molecular weight. However, a new molecular weight parameter, termed the failure property parameter, is able to provide a single relationship between tensile strength and the parameter for both the broad and narrow distribution polymers. The form of this parameter is consistent with its having origins in the view that it is the entanglement network in an amorphous polymer that provides the observed strength properties. Specifically for polystyrene, the failure property parameter results indicate that material below 60,000 molecular weight does not contribute to polymer strength. Although the results of this investigation are specifically for polystyrene, the arguments used to develop the failure property parameter are not dependent on polymer chemical structure. Consequently, we believe that both the concepts and definition of this new parameter are applicable to all amorphous polymers.     

Solid-State Electrodes for Multichannel Multiplexed Intracortical Neuronal Recording

Thin-film arrays of extracellular recording electrodes have been developed for use in studies of information processing in neural structures and eventual use in closed-loop control of neural prostheses. These probes consist of a silicon substrate which supports an array of thin-film conductors. The conductors are insulated above and below with deposited dielectrics. The electrode sites are defined by openings in the upper dielectric layer and are inlaid with gold to form low-impedance recording surfaces. The probes are typically 15 pim in thickness with shank widths as narrow as 20 ?m. The probe fabrication process is compatible with the inclusion of signal processing circuitry directly on the probe substrate. A 12 channel on-chip signal processor design with per-channel gain of 100, bandwidth of 100 Hz-6 kHz, multiplexed output, and recording-site impedance check capability is described. The probes have adequate strength to penetrate the gerbil pia-arachnoid layer and have recorded single neuron activity of over 500 ?V peak-to-peak from tip, side, and mid-carrier sites. Signal-to-noise ratios as high as 10:1 have been achieved. An equivalent circuit model for the conducting leads, the recording site, and the electrode-electrolyte interface is described. Development of biocompatible insulation and encapsulation materials for long-term implantation of active probes is underway.     

Systematic Bivariate Analysis of AM Field Strength Measurement Data

A systematic method for analyzing AM field strength measurement data to establish inverse distance field strength and ground conductivity zones is presented. The technique uses a simple bivariate error minimization routine to find the combination of radiation and conductivity which most closely matches the measurement data out to three kilometers. The balance of the conductivity zones are determined by a running average which again seeks minimum error when compared to digitized versions of the FCC groundwave propagation curves. An extension of the technique allows such net conductivities along a radial to be converted to equivalent "M3 map" conductivities. The mathematical algorithms provide unique and repeatable results, and are readily adapted for use in computer programs.     

An economic input-output analysis for urban stormwater quality planning

A new approach using input-output techniques is proposed for the analysis of urban stormwater pollution caused by urban land development. The input-output model provides projections of sectoral outputs within an urban region. By defining land as an input to production, these output projections may be translated into projections of commercial and industrial land development. Furthermore, the closed version of the input-output model is used to project residential land development as a function of projected wage income. The pollutant generation in urban stormwater is related to the quantity of each category of land development by a pollutant coefficient matrix. Thus, the model can be used to predict the impact of various economic growth scenarios on pollution loadings in runoff water. This will help planners in assessing the environmental costs of various scenarios, and in preparing for remedial actions. A numerical example is provided to illustrate the applications of the model.