Strong and super tough: Layered ceramic‐polymer composites with bio‐inspired morphology

Bio‐inspired layered ceramic‐polymer composites with high strength and toughness were prepared from sintered aluminum oxide ceramic sheets and cationically curing epoxy resins toughened with poly(ε‐caprolactone) (PCL). The architecture of the composite is inspired by nacre but is arranged on a larger scale. Ceramic sheets with a nominal thickness of 250 μm were assembled into composite plates by adhesive layers with a nominal thickness of 20 μm. Before the manufacturing of the composites, the stress‐strain properties of the polymer component were tailored by the variation in the PCL content between 0 and 39 wt%. For composites with 4 and 15 ceramic layers, the bending strengths achieved 327 MPa and 376 MPa, which are higher than that of pure ceramic sheets. Moreover, composites with 15 ceramic layers show a 16 times higher toughness compared to that of the pure ceramic sheets. The results indicate that the toughness of the layered composites increases significantly with the number of layers. Inspired by the geometrical ratio of the natural sheet composite nacre, we have achieved a similar strength but a 2 times higher toughness than nacre by only adding up to 6 vol% of the polymer.     

Improvement of the short‐ and long‐term mechanical properties of injection‐molded poly(etheretherketone) and hydroxyapatite nanocomposites

Nanocomposites of polyetheretherketone (PEEK) and hydroxyapatite (HA) nanoparticles treated with a silane coupling agent were successfully prepared by twin screw extrusion and injection molding. Some of the samples were annealed after the injection molding. The silane treatment promoted an improvement of the short‐ and long‐term mechanical properties of the nanocomposites. A higher stress and a six times higher deformation at break and a higher impact strength were observed in the silane‐treated nanocomposites when compared to the nontreated ones. The number of cycles to fail of the treated nanocomposites was almost 200% higher than the number of cycles to fail of the nontreated samples. The treatment also decreased the glass transition temperature and amount of crystallinity of the samples. This improvement in mechanical properties obtained from the silane treatment was attributed to the strengthening of the PEEK/HA interfacial bond, to the plasticization of the PEEK matrix by silane oligomers produced during the processing and to a better dispersion of the HA nanoparticles within the PEEK matrix. Samples annealing, however, diminished all these properties due to the increase in crystallinity. Studies of the short‐ and long‐term mechanical properties of these nanocomposites under physiological conditions and of the proliferation of stem cells are under way. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44476.     

Manifestation of <Emphasis Type="Italic">PT</Emphasis> symmetry in the exciton spectra of quantum wells

The reflection and photoluminescence excitation spectra under circular polarization of the incident light are measured in wide quantum wells whose width is much larger than the exciton Bohr radius. It is found that, in the absence of a magnetic field, the relation between the intensities of even and odd absorption peaks is reversed upon reversal of the sign of circular polarization.     

Hydrothermally treated chitosan spontaneously forms water-soluble spherical particles stable at a wide pH range

The authors report the spontaneous formation of water-soluble chitosan-tartaric acid (CS-TA) spherical particles. Particles are formed by heating chitosan in the presence of tartaric acid under hydrothermal conditions. Tartaric acid serves as an ionic cross-linker, a depolymerizing agent, and a particle stabilizer in aqueous phase. The CS-TA particles exhibit superior colloidal stability at a wide pH range due to their surface charge tunability, which is due to the colocalization of surface hydroxyl, amine, and carboxyl groups. At physiological pH condition, particles have zwitterionic structure as determined by the zeta potential measurements. Still, CS-TA maintains colloidal stability at neutral pH due to the abundance of surface hydroxyl groups. As a proof-of-concept study, the CS-TA particles were labeled with a model insoluble cargo (fluorescein isothiocyanate [FITC]) to demonstrate their capacity for solubilizing hydrophobic drugs. The CS-TA/FITC conjugates were found to remain well dispersed at neutral pH, while maintaining FITC fluorescence properties.     

Intelligence by mechanics

Research on the biomechanics of animal and human locomotion provides insight into basic principles of locomotion and respective implications for construction and control. Nearly elastic operation of the leg is necessary to reproduce the basic dynamics in walking and running. Elastic leg operation can be modelled with a spring-mass model. This model can be used as a template with respect to both gaits in the construction and control of legged machines. With respect to the segmented leg, the humanoid arrangement saves energy and ensures structural stability. With the quasi-elastic operation the leg inherits the property of self-stability, i.e. the ability to stabilize a system in the presence of disturbances without sensing the disturbance or its direct effects. Self-stability can be conserved in the presence of musculature with its crucial damping property. To ensure secure foothold visco-elastic suspended muscles serve as shock absorbers. Experiments with technically implemented leg models, which explore some of these principles, are promising.     

Purity evaluation of carbon nanotube materials by thermogravimetric, TEM, and SEM methods

Raw and purified samples of carbon nanotubes are considered as multicomponent systems with a distribution of carbonaceous, amorphous, multishell graphitic particles and nanotubes, together with the particles of metal compounds from the catalyst. With respect to the carbon nanotube fractions, a distribution of size, defect concentrations, and functionalities needs to be taken into account. In order to address the problem of quantitative evaluation of purity it is necessary to measure the quality and distribution of the carbon nanotubes. In this research conventional and high resolution thermogravimetry are applied to quantify different fractions of carbonaceous and metallic materials in raw and moderately purified single walled and multiwalled carbon nanotubes. For each oxidized fraction, defined by careful line shape analysis of the derivative thermogravimetric curves (DTG), the temperature of maximum rate of oxidation, the temperature range for this oxidation, related to the degree of homogeneity, and the amount of associated material is specified. The attribution of carbonaceous materials to each fraction in the distribution was based on SEM and TEM measurements and the literature. The MWNT purified sample with 1.6 wt% metal oxide was investigated by high resolution thermogravimetry (HRTG). The quantitative assessment for the carbonaceous fractions was 25 wt% of amorphous and high defect carbonaceous materials including nanotubes, 54 wt% MWNT and 20 wt% multishell graphitic particles. A qualitative evaluation of these fractions was obtained from the SEM and TEM images and supports these results. The accuracy of the values, taking into account other measurements performed on the same batch of material, should be more sensible than +/-4 wt%.     

Characterization of nanostructured surfaces generated by reconstitution of the porin MspA from Mycobacterium smegmatis

Nanostructures with long-term stability at the surface of gold electrodes are generated by reconstituting the porin MspA from Mycobacterium smegmatis into a specially designed monolayer of long-chain lipid surfactant on gold. Tailored surface coverage of gold electrodes with long-chain surfactants is achieved by electrochemically assisted deposition of organic thiosulfates (Bunte salts). The subsequent reconstitution of the octameric-pore MspA is guided by its extraordinary self-assembling properties. Importantly, electrochemical reduction of copper(II) yields copper nanoparticles within the MspA nanopores. Electrochemical impedance spectroscopy, reflection electron microscopy, and atomic force microscopy (AFM) show that: 1) the MspA pores within the self-assembled monolayer (SAM) are monodisperse and electrochemically active, 2) MspA reconstitutes in SAMs and with a 10-nm thickness, 3) AFM is a suitable method to detect pores within SAMs, and 4) the electrochemical reduction of Cu2+ to Cu0 under overpotential conditions starts within the MspA pores.     

Verified Error Bounds for Linear Systems Through the Lanczos Process

We use verified computations and the Lanczos process to obtain guaranteed lower and upper bounds on the 2-norm and the energy-norm error of an approximate solution to a symmetric positive definite linear system. The upper bounds require the a priori knowledge of a lower bound on the smallest eigenvalue.     

Effects of locus coeruleus stimulation on the responses of SI neurons of the rat to controlled natural and electrical stimulation of the skin

Recent epidemiologic data demonstrate a dramatic increase in the incidence of end-stage renal disease (ESRD) in patients with non-insulin-dependent diabetes mellitus (NIDDM), thus dispelling the mistaken belief that renal prognosis is benign in NIDDM. Currently, the leading cause of ESRD in the United States, Japan, and in most industrialized Europe is NIDDM, accounting for nearly 90% of all cases of diabetes. In addition to profound economic costs, patients with NIDDM and diabetic nephropathy have a dramatically increased morbidity and premature mortality. NIDDM-related nephropathy varies widely among racial and ethnic groups, genders and lifestyles; and gender may interact with race to affect the disease progression. While the course of insulin-dependent diabetes mellitus (IDDM) progresses through well-defined stages, the natural history of NIDDM is less well characterized. NIDDM patients with coronary heart disease have a higher urinary albumin excretion rate at the time of diagnosis and follow-up. This greater risk may also be associated with hypertension and hyperlipidemia, and genes involved in blood pressure are obvious candidate genes for diabetic nephropathy. Hyperglycemia appears to be an important factor in the development of proteinuria in NIDDM, but its role and the influence of diet are not yet clear. Tobacco smoking can also be deleterious to the diabetic patient, and is also associated with disease progression. Maintaining euglycemia, stopping smoking and controlling blood pressure may prevent or slow the progression of NIDDM-related nephropathy and reduce extrarenal injury. Treatment recommendations include early screening for hyperlipidemia, appropriate exercise and a healthy diet. Cornerstones of management should also include: (1) educating the medical community and more widely disseminating data supporting the value of early treatment of microalbuminuria; (2) developing a comprehensive, multidisciplinary team approach that involves physicians, nurses, diabetes educators and behavioral therapists; and (3) intensifying research in this field.