Reliability of gate dielectrics and metal–insulator–metal capacitors

In this review paper reliability characterisation methods of SiO₂ as gate dielectric and metal–insulator–metal capacitors with various dielectrics are discussed. It includes the test structure design, the stress and measurement sequences, the raw data analysis and the extrapolation models of measured time to breakdown to lifetimes at operating conditions and targeted product failure rates. For each topic various references are given where further details are described. Especially pitfalls of approaches and problem areas are highlighted.     

Adhesion and Mechanical Properties of PNIPAM Microgel Films and Their Potential Use as Switchable Cell Culture Substrates

Thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) microgel films are shown to allow controlled detachment of adsorbed cells via temperature stimuli. Cell response occurs on the timescale of several minutes, is reversible, and allows for harvesting of cells in a mild fashion. The fact that microgels are attached non‐covalently allows using them on a broad variety of (charged) surfaces and is a major advantage as compared to approaches relying on covalent attachment of active films. In the following, the microgels’ physico‐chemical parameters in the adsorbed state and their changes upon temperature variation are studied in order to gain a deeper understanding of the involved phenomena. By means of atomic force microscopy (AFM), the water content, mechanical properties, and adhesion forces of the microgel films are studied as a function of temperature. The analysis shows that these properties change drastically when crossing the critical temperature of the polymer film, which is the basis of the fast cell response upon temperature changes. Furthermore, nanoscale mechanical analysis shows that the films posses a nanoscopic gradient in mechanical properties.     

Winner-Takes-All Associative Memory: A Hamming Distance Vector Quantizer

We present a design methodology for mapping neuralyinspired algorithms for vector quantization, into VLSI hardware.We describe the building blocks used: memory cells, current conveyors,and translinear circuits. We use the basic building blocks todesign an associative processor for bit-pattern classification;a high-density memory based neuromorphic processor. Operatingin parallel, the single chip system determines the closest match,based on the Hamming distance, between an input bit pattern andmultiple stored bit templates; ties are broken arbitrarily. Energyefficient processing is achieved through a precision-on-demandarchitecture. Scalable storage and processing is achieved througha compact six transistor static RAM cell/ALU circuit. The singlechip system is programmable for template sets of up to 124 bitsper template and can store up to 116 templates (total storagecapacity of 14 Kbits). An additional 604 bits of auxiliary storageis used for pipelining and fault tolerance re-configuration capability.A fully functional 6.8 mm by 6.9 mmchip has been fabricated in a standard single–poly, double–metal2.0µmn–well CMOS process.     

Parallel Adder Design with Reduced Circuit Complexity Using Resonant Tunneling Transistors and Threshold Logic

Quantum-effect devices utilizing resonant tunneling are promising candidates for future nano-scale integration. Originating from the technological progress of semiconductor technology, circuit architectures with reduced complexity are investigated by exploiting the negative-differential resistance of resonant tunneling devices. In this paper a resonant tunneling device threshold logic family based on the Monostable-Bistable Transition Logic Element (MOBILE) is proposed and applied to different parallel adder designs, such as ripple carry and binary carry lookahead adders. The basic device is a resonant tunneling transistor (RTT) composed of a resonant tunneling diode monolithically integrated on the drain contact layer of a heterostructure field effect transistor. On the circuit level the key components are a programmable NAND/NOR logic gate, threshold logic gates, and parallel counters. The special properties of MOBILE logic gates are considered by a bit-level pipelined circuit style. Experimental results are presented for the NAND/NOR logic gate.     

Forward and Reverse Converters and Moduli Set Selection in Signed-Digit?Residue?Number?Systems

This paper presents an investigation into using a combination of two alternative digital number representations; the residue number system (RNS) and the signed-digit (SD) number representation in digital arithmetic circuits. The combined number system is called RNS/SD for short. Since the performance of RNS/SD arithmetic circuits depends on the choice of the moduli set (a set of pairwise prime numbers), the purpose of this work is to compare RNS/SD number systems based on different sets. Five specific moduli sets of different lengths are selected. Moduli-set-specific forward and reverse RNS/SD converters are introduced for each of these sets. A generic conversion technique for moduli sets consisting of any number of elements is also presented. Finite impulse response (FIR) filters are used as reference designs in order to evaluate the performance of RNS/SD processing. The designs are evaluated with respect to delay and circuit area in a commercial 0.13 μm CMOS process. For the case of FIR filters it is shown that generic moduli sets with five or six moduli results in designs with the best area × delay products.

Quality of Service Schemes for IEEE 802.11 Wireless LANs – An Evaluation

This paper evaluates four mechanisms for providing service differentiation in IEEE 802.11 wireless LANs. The evaluated schemes are the Point Coordinator Function (PCF) of IEEE 802.11, the Enhanced Distributed Coordinator Function (EDCF) of the proposed IEEE 802.11e extension to IEEE 802.11, Distributed Fair Scheduling (DFS), and Blackburst. The evaluation was done using the ns-2 simulator. Furthermore, the impact of some parameter settings on performance has also been investigated. The metrics used in the evaluation are throughput, medium utilization, collision rate, average access delay, and delay distribution for a variable load of real time and background traffic. The simulations show that the best performance is achieved by Blackburst. PCF and EDCF are also able to provide pretty good service differentiation. DFS can give a relative differentiation and consequently avoids starvation of low priority traffic.     

Classification of rheumatoid joint inflammation based on laser imaging

We describe a classification system for a novel imaging method for arthritic finger joints. The basis of this system is a laser imaging technique which is sensitive to the optical characteristics of finger joint tissue. From the laser images acquired at baseline and follow-up, finger joints can automatically be classified according to whether the inflammatory status has improved or worsened. To perform the classification task, various linear and kernel-based systems were implemented and their performances were compared. Based on the results presented in this paper, we conclude that the laser-based imaging permits a reliable classification of pathological finger joints, making it a sensitive method for detecting arthritic changes.     

Conducting Domain Walls in Lithium Niobate Single Crystals

Ferroic materials play an increasingly important role in novel (nano)electronic devices. Recently, research on domain walls (DWs) receives a big boost by the discovery of DW conductivity (DWC) in BiFeO₃ and Pb(Zr_xTi_1‐x)O₃ ferroic thin films. Here, it is demonstrated that DWC is not restricted to thin films, but equally applies to millimeter‐thick wide‐bandgap, ferroic single crystals, such as LiNbO₃. In this material transport along DWs can be switched by super‐bandgap illumination and tuned by engineering the tilting angle of DWs with respect to the polar axis. The results are consistently obtained using conductive atomic force microscopy to locally map the DWC and macroscopic contacts, thereby in addition investigating the temperature dependence, DW transport activation energies, and relaxation behavior.     

Visualizing the performance loss of solar cells by IR thermography — an evaluation study on CIGS with artificially induced defects

Local electric defects may result in considerable performance losses in solar cells. Infrared (IR) thermography is one important tool to detect these defects on photovoltaic modules. Qualitative interpretation of IR images has been carried out successfully, but quantitative interpretation has been hampered by the lack of “calibration” defects. The aims of this study are to (i) establish methods to induce well‐defined electric defects in thin‐film solar cells serving as “calibration” defects and to (ii) assess the accuracy of IR imaging methods by using these artificially induced defects. This approach paves the way for improving quality control methods based on imaging in photovoltaic. We created ohmic defects (“shunts”) by using a focused ion beam and weak diodes (“interface shunts”) by applying a femto‐second laser at rather low power on copper indium gallium selenide cells. The defects can be induced precisely and reproducibly, and the severity of the defects on the electrical performance can be well adjusted by focused ion beam/laser parameters. The successive assessment of the IR measurement (ILIT‐Voc) revealed that this method can predict the losses in P_mpp (maximal power extractable) with a mean error of below 10%. Copyright © 2016 John Wiley & Sons, Ltd.     

UNICORE 6 — Recent and Future Advancements

UNICORE is a European Grid Technology with more than 10 years of history. Originating from the Supercomputing domain, the latest version UNICORE 6 has turned into a general-purpose Grid technology that follows established standards and offers a rich set of features to its users. The paper starts with an architectural insight into UNICORE 6, highlighting the workflow features, standards and the different clients. Next, the current state of advancement is presented by describing recent developments. The paper closes with an outlook on future planned developments.