Fiber formation and properties of polyester/lignin blends

Thermotropic liquid crystalline polyesters with varied chemical structure are synthesized by melt transesterification polycondensation. They are employed as matrix for blends with lignin materials to obtain melt-spinnable precursors for carbon fibers. The lignin samples are carefully purified by fractionation, enzymatic removal of reducing sugars, and subsequent modification of the terminal OH groups. Effective melt blending is achieved with liquid-crystalline aromatic–aliphatic polyesters having melting ranges that match the softening temperature of the lignin fractions, which is necessary to prevent thermal decomposition of the lignin. Polyester/lignin blends are partially compatibilized, phase-separated materials. The polyester/lignin materials are melt-spun successfully. The fiber properties depend on the lignin purification process. X-ray scattering reveals that orientation in lignin-containing fibers is maintained. First experiments show that the fibers can be converted successfully to carbon fibers by thermal annealing procedures. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48257.     

Influence of annealing on the permeation properties of a thermoplastic elastomer

The use of plastic films with specific diffusion or permeation properties for industrial applications has grown at a considerable rate. Some useful applications are found in medical devices, bioreactors, and combustible fuel storage where polymer films function as separation membranes that allow permeation of different gases at different rates. In this work, the permeation and diffusion properties of a polyester‐based thermoplastic polyurethane (TPU) were investigated. TPU injected and extruded specimens were subjected to thermal treatment (annealing) at 100°C for 20 h. Injected samples were exposed to certain hygrothermal conditions and films were prepared to evaluate the influence of annealing on the permeation of gases. In order to achieve a complete analysis, tests such as differential scanning calorimetry, tensile tests, and Fourier transform infrared spectroscopy were conducted to examine the morphological changes. These were then correlated to the TPU permeation behavior after annealing. Water uptake by the polymer—measured as weight gain—likely indicates an increase in the free volume in the amorphous domains. Similarly, in permeation and water immersion tests, the diffusion rate of gases and H₂O through the TPU was higher for the annealed samples when compared to those without treatment, indicating that diffusion within the polymer is dependent on the postprocessing thermal treatment. POLYM. ENG. SCI., 59:1810–1817, 2019. © 2019 Society of Plastics Engineers     

IR spectroscopy: Suitable method for determination of curing degree and crosslinking type in melamine–formaldehyde resins

Melamine–formaldehyde (MF) resins are widely used as adhesives and finishing materials in the wood industry. During resin cure, either methylene ether or methylene bridges are formed, leading to the formation of a three-dimensional resin network. Not only the curing degree, but also the chemical species present in the cured resin determine the quality of the final product. Analytical methods allowing a detailed investigation of network formation are of great benefit to manufacturers. In the present work, resin cure of an MF precondensate is studied at different temperatures (100–200 °C) without considering the initial pH as a factor. Isoconversional kinetic analysis based on exothermal curing enthalpies enables calculation of the crosslinking degree at a given time/temperature regime. A semiquantitative determination of the chemical groups present is performed based on solid-state nuclear magnetic resonance data. Fourier transform infrared spectroscopy has shown to be a fast and reliable analytical tool with high sensitivity toward functional groups and with great potential for at-line process control. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47691.     

Determination of polycyclic aromatic hydrocarbons in smoked pork by effect-directed bioassay with confirmation by chemical analysis

Polycyclic aromatic hydrocarbons (PAHs) are generated during smoke curing and other heating treatments of food and represent a large class of chemical pollutants including a number of carcinogens. At present, PAHs are frequently detected by costly and time-consuming chemical analysis. Effect-directed in vitro cell-based bioassays of contaminants can offer a rapid, sensitive, and relatively inexpensive alternative for screening of contaminants in comparison to instrumental analysis. They enable estimation of total biological activity of all compounds acting through the same mode of binding. The aryl hydrocarbon receptor as a binding site plays an important role in PAH-induced carcinogenesis. The in vitro chemical-activated luciferase expression assay (using conditions to detect PAH) was investigated for its applicability for effect-directed analysis of PAH levels in smoked meat. There was an intra-assay variability of 0 to 15% and a mean coefficient of variation of 25% (3 to 50%) for the cleanup and bioassay analysis of the smoked pork samples. There was a correlation between the total responses of the bioassay and the individual amounts of the PAHs with a high molecular weight. The comparison of 2,3,7,8-tetrachlorodibenzo-p-dioxin and benzo[k]fluoranthene used as standard in the in vitro chemical-activated luciferase expression assay resulted in benzo[k]fluoranthene being able to be used as an alternative, nontoxic standard in the bioassay. This bioassay is an applicable effect-directed functional prescreening method for the analysis of PAHs in smoked meat and appears to have potential in being used for food control in the future.     

Four‐junction spectral beam‐splitting photovoltaic receiver with high optical efficiency

A spectral beam‐splitting architecture is shown to provide an excellent basis for a four junction photovoltaic receiver with a virtually ideal band gap combination. Spectrally selective beam‐splitters are used to create a very efficient light trap in form of a 45° parallelepiped. The light trap distributes incident radiation onto the different solar cells with an optical efficiency of more then 90%. Highly efficient solar cells including III–V semiconductors and silicon were fabricated and mounted into the light trapping assembly. An integrated characterization of such a receiver including the measurement of quantum efficiency as well as indoor and outdoor I–V measurements is shown. Moreover, the optical loss mechanisms and the optical efficiency of the spectral beam‐splitting approach are discussed. The first experimental setup of the receiver demonstrated an outdoor efficiency of more than 34% under unconcentrated sunlight. Copyright © 2010 John Wiley & Sons, Ltd.     

Smart 概念——苹果加工的全套解决方案

酶制剂在苹果汁生产中的作用 在苹果原料的成熟和储存过程中,苹果细胞壁的多糖也在逐步演变,苹果会慢慢变软,一些多糖会部分溶解.这些多糖都具备高度的持水性,能将果汁保持在果浆中,导致可榨性降低,出汁率下降.为了确保苹果出汁率达到最佳水平.必须在榨汁阶段加入果浆酶.     

Batch Tests for Optimisation of Solvent Composition and Process Flexibility of the CHALMEX FS-13 Process

ABSTRACT

Studies have been performed with the purpose of determining the optimal solvent composition of a Chalmers grouped actinide extraction (CHALMEX) solvent for the selective co-extraction of transuranic elements in a novel Grouped ActiNide EXtraction (GANEX) process. The solvent is composed of 6,6’-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-benzo-[1,2,4]-triazin-3-yl)-[2,2’]-bipyridine (CyMe₄-BTBP) and tri-n-butyl phosphate (TBP) in phenyl trifluoromethyl sulfone (FS-13). The performance of the system has been shown to significantly depend on the ratios of the two extracting agents and the diluent to one another. Furthermore, the performance of the determined optimal solvent (10 mM CyMe₄-BTBP in 30% v/v TBP and 70% v/v FS-13) on various simulated PUREX raffinate solutions was tested. It was found that the solvent extracts all transuranic elements with high efficiency and good selectivity with regard to most other elements (fission products/activation products) present in the simulated PUREX raffinate solutions. Moreover, the solvent was found to extract a significant amount of acid. Palladium, silver, and cadmium were co-extracted along with the TRU-radionuclides, which has also been observed in other similar CHALMEX systems. The extraction of plutonium and uranium was preserved for all tested simulated PUREX raffinate solutions compared to experiments using trace amounts.     

Density of solutions of formaldehyde in water and alcohols

Formaldehyde is an important chemical that is mostly handled in aqueous solutions, which generally also contain methanol; furthermore, also solutions of formaldehyde in other alcohols are used. The density of these solutions is an important thermophysical property. The available models of the density of formaldehyde-containing solutions, however, all have shortcomings, such as a poor accuracy or a limited range of applicability. Therefore, in the present work, a new model of the density in systems of the type (formaldehyde + water + alcohol) was developed. The alcohols that are presently included in the new model are methanol, 1-propanol, and isoprenol; an extension to other alcohols is straightforward. The model was developed using literature data and extensive new density data measured in this work covering binary, ternary, and quarternary solutions of formaldehyde in water, methanol, 1-propanol, and isoprenol at temperatures of $283-333$ K and formaldehyde concentrations of 0.06 − 0.30 g g⁻¹.     

New methods for calculating the force distribution within belt grinding processes

In order to simulate belt grinding processes (e.g. for process planning or path planning) one usually needs information about the contact zone and contact forces. Typically, an unacceptable computational effort is required for good simulation results, since these contact problems are usually of a nonlinear nature. In this paper, the application of support vector machines (SVM) is presented. The SVM is a learning machine that aims at finding a function that optimally fits given observations. The main advantage of SVM is its fast evaluation during simulation. However, a single training phase with an extensive amount of observation data has to be done once before the simulation can take place. From a practical point of view, it is very often not feasible to sample these observation data by experiments. At this point special Finite element methods for contact problems can be applied very efficiently. In order to obtain as accurate as possible training data, an adaptive finite element method for contact problems has been developed.     

X-ray grating interferometer for materials-science imaging at a low-coherent wiggler source

X-ray phase-contrast radiography and tomography enable to increase contrast for weakly absorbing materials. Recently, x-ray grating interferometers were developed that extend the possibility of phase-contrast imaging from highly brilliant radiation sources like third-generation synchrotron sources to non-coherent conventional x-ray tube sources. Here, we present the first installation of a three grating x-ray interferometer at a low-coherence wiggler source at the beamline W2 (HARWI II) operated by the Helmholtz-Zentrum Geesthacht at the second-generation synchrotron storage ring DORIS (DESY, Hamburg, Germany). Using this type of the wiggler insertion device with a millimeter-sized source allows monochromatic phase-contrast imaging of centimeter sized objects with high photon flux. Thus, biological and materials-science imaging applications can highly profit from this imaging modality. The specially designed grating interferometer currently works in the photon energy range from 22 to 30 keV, and the range will be increased by using adapted x-ray optical gratings. Our results of an energy-dependent visibility measurement in comparison to corresponding simulations demonstrate the performance of the new setup.