Elastic properties of adhesive polymers. II. Polymer films and bond lines by means of nanoindentation

Seven different polymers used frequently as adhesives and/or matrix polymers in wood, wood composites, and natural fiber‐reinforced composites were studied by uniaxial tensile tests and nanoindentation. It was shown that the elastic modulus, the hardness, the creep factor, and the elastic‐, plastic‐, and viscoelastic work of indentation of the seven different polymers is essentially the same regardless whether the polymers were tested in the form of pure films or in situ, i.e., in an adhesive bond line with spruce wood. An excellent correlation was found between the elastic modulus measured by tensile tests and the elastic modulus measured by nanoindentation. In spite of the good correlation, the elastic modulus measured by nanoindentation is significantly higher than the elastic modulus measured by tensile tests. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1234–1239, 2006     

Temporal and spatial dynamics of surface run‐off from Lake Basaka catchment (Ethiopia) using SCS‐CN model coupled with remote sensing and GIS

The Lake Basaka catchment (Ethiopia) has undergone a significant land use–land cover (LULC) change and lake level rise over the past five decades. Significant quantities of water and sediment flow annually into the lake through erosion processes. An appropriate method of estimating the surface run‐off from such ungauged and dynamic catchment is extremely important for delineating sensitive areas (based on run‐off responses) to be protected and for development of suitable measures to reduce run‐off and associated soil loss. Reliable prediction of run‐off, however, is very difficult and time‐consuming for catchments such as that of Lake Basaka. The present study estimated the dynamics of surface (direct) run‐off using the NRCS‐CN model in ArcGIS, assisted by remote sensing and ancillary data. The results indicated the Lake Basaka catchment experienced significant temporal and spatial variability in its run‐off responses, depending on the rainfall (amount and distribution) pattern and LULC changes. A significant run‐off increase occurred after 1973, consistent with significant LULC changes and lake level increments occurring after that period. A reduced vegetation cover also resulted in increased run‐off coefficient of the lake catchment from 0.11 in the 1970s to 0.23 in the 2000s, indicating the important need to consider possible future LULC evolution when forecasting the lake catchment run‐off behaviour.     

Pressure-infiltration processing of reinforced aluminum

Pressure infiltration of liquid metal is one of the most important processing routes for the production of aluminum-matrix composites having a self-supporting reinforcement phase. This article briefly examines the physical phenomena governing infiltration processes, to present practical guidelines derived from their analysis for optimization of the process and the materials produced. Engineering aspects that are pertinent to infiltration techniques, including preform preparation, process configurations, flow control, and innovative processes, are summarized.     

Stabilised finite element methods for a bending moment formulation of the Reissner-Mindlin plate model

This work presents new stabilised finite element methods for a bending moments formulation of the Reissner-Mindlin plate model. The introduction of the bending moment as an extra unknown leads to a new weak formulation, where the symmetry of this variable is imposed strongly in the space. This weak problem is proved to be well-posed, and stabilised Galerkin schemes for its discretisation are presented and analysed. The finite element methods are such that the bending moment tensor is sought in a finite element space constituted of piecewise linear continuos and symmetric tensors. Optimal error estimates are proved, and these findings are illustrated by representative numerical experiments.     

Giving too much social support: social overload on social networking sites

As the number of messages and social relationships embedded in social networking sites (SNS) increases, the amount of social information demanding a reaction from individuals increases as well. We observe that, as a consequence, SNS users feel they are giving too much social support to other SNS users. Drawing on social support theory (SST), we call this negative association with SNS usage ‘social overload’ and develop a latent variable to measure it. We then identify the theoretical antecedents and consequences of social overload and evaluate the social overload model empirically using interviews with 12 and a survey of 571 Facebook users. The results show that extent of usage, number of friends, subjective social support norms, and type of relationship (online-only vs offline friends) are factors that directly contribute to social overload while age has only an indirect effect. The psychological and behavioral consequences of social overload include feelings of SNS exhaustion by users, low levels of user satisfaction, and a high intention to reduce or even stop using SNS. The resulting theoretical implications for SST and SNS acceptance research are discussed and practical implications for organizations, SNS providers, and SNS users are drawn.     

The complexity of intersecting finite automata having few final states

The problem of determining whether several finite automata accept a word in common is closely related to the well-studied membership problem in transformation monoids. We raise the issue of limiting the number of final states in the automata intersection problem. For automata with two final states, we show the problem to be \({\oplus}\)L-complete or NP-complete according to whether a nontrivial monoid other than a direct product of cyclic groups of order 2 is allowed in the automata. We further consider idempotent commutative automata and (Abelian, mainly) group automata with one, two, or three final states over a singleton or larger alphabet, elucidating (under the usual hypotheses on complexity classes) the complexity of the intersection nonemptiness and related problems in each case.     

Moving loads on flexible structures presented in the floating frame of reference formulation

The introduction of moving loads in the Floating Frame of Reference Formulation is presented. We derive the kinematics and governing equations of motion of a general flexible multibody system and their extension to moving loads. The equivalence of convective effects with Coriolis and centripetal forces is shown. These effects are measured numerically and their significance in moving loads traveling at high speed is confirmed. A method is presented to handle discontinuities when moving loads separate from the flexible structure. The method is extended from beam models to general flexible structures obtained by means of the Finite Element Method. An interpolation method for the deformation field of the modal representation of these bodies is introduced.The work is concluded by application of the method to modern mechanical problems in numerical simulations.     

Automatisches Sicherheitstesten

Moderne Testgeneratoren finden Schwachstellen in Eingabeschnittstellen von Programmen, indem sie in Sekunden tausende Eingaben zufällig erzeugen. Die Werkzeuge lassen sich leicht von jedermann einsetzen–zum Angriff oder zur Verteidigung.     

3D interactive topology optimization on hand-held devices

This educational paper describes the implementation aspects, user interface design considerations and workflow potential of the recently published TopOpt 3D App. The app solves the standard minimum compliance problem in 3D and allows the user to change design settings interactively at any point in time during the optimization. Apart from its educational nature, the app may point towards future ways of performing industrial design. Instead of the usual geometrize, then model and optimize approach, the geometry now automatically adapts to the varying boundary and loading conditions. The app is freely available for iOS at Apple’s App Store and at http://www.topopt.dtu.dk/TopOpt3D for Windows and OSX.     

Mixing matrix estimation using discriminative clustering for blind source separation

Mixing matrix estimation in instantaneous blind source separation (BSS) can be performed by exploiting the sparsity and disjoint orthogonality of source signals. As a result, approaches for estimating the unknown mixing process typically employ clustering algorithms on the mixtures in a parametric domain, where the signals can be sparsely represented. In this paper, we propose two algorithms to perform discriminative clustering of the mixture signals for estimating the mixing matrix. For the case of overdetermined BSS, we develop an algorithm to perform linear discriminant analysis based on similarity measures and combine it with K-hyperline clustering. Furthermore, we propose to perform discriminative clustering in a high-dimensional feature space obtained by an implicit mapping, using the kernel trick, for the case of underdetermined source separation. Using simulations on synthetic data, we demonstrate the improvements in mixing matrix estimation performance obtained using the proposed algorithms in comparison to other clustering methods. Finally we perform mixing matrix estimation from speech mixtures, by clustering single source points in the time-frequency domain, and show that the proposed algorithms achieve higher signal to interference ratio when compared to other baseline algorithms.