Stopping power of swift neon ions in dependence on the charge state in the non-equilibrium regime

We report on measurements of charge changing cross-sections and energy losses in dependence on the initial and final charge state of Ne ions at an incident energy of 2 MeV/u penetrating thin carbon foils. Different initial charge states could be separated in energy by applying a high voltage in front of the carbon foils; the final charges and their energy loss were measured with a high-resolution magnetic spectrometer. We derived a consistent evolution of the charge state distribution solving the corresponding rate equations for the measured cross-sections. Including the charge state dependent energy losses, ΔE(q_i,q_f), stopping power values for frozen charge states, S(q), could be extracted. The experimental data are compared with different theoretical predictions.     

A three-phase model for mixed columnar-equiaxed solidification

A three-phase model for mixed columnar-equiaxed solidification is presented in this article. The three phases are the parent melt as the primary phase, as well as the solidifying columnar dendrites and globular equiaxed grains as two different secondary phases. With an Eulerian approach, the three phases are considered as spatially coupled and interpenetrating continua. The conservation equations of mass, momentum, species, and enthalpy are solved for all three phases. An additional conservation equation for the number density of the equiaxed grains is defined and solved. Nucleation of the equiaxed grains, diffusion-controlled growth of both columnar and equiaxed phases, interphase exchanges, and interactions such as mass transfer during solidification, drag force, solute partitioning at the liquid/solid interface, and release of latent heat are taken into account. Binary steel ingots (Fe-0.34 wt pct C) with two-dimensional (2-D) axis symmetrical and three-dimensional (3-D) geometries as a benchmark were simulated. It is demonstrated that the model can be used to simulate the mixed columnar-equiaxed solidification, including melt convection and grain sedimentation, macrosegregation, columnar-to-equiaxed-transition (CET), and macrostructure distribution. The model was evaluated by comparing it to classical analytical models based on limited one-dimensional (1-D) cases. Satisfactory results were obtained. It is also shown that in order to apply this model for industrial castings, further improvements are still necessary concerning some details.     

Workplane illuminance prediction method for daylighting control systems

A new prediction method with an interior light sensor for the workplane illuminance in daylighting control systems is introduced. Based on radiosity theory, the spatial distributions of daylight and electric light in the space are discussed and the prediction method is developed. An experimental verification of the technique is performed in an outdoor test-room for a double-glazed window system with a motorized venetian blind integrated between the two glazings. Electric light and daylight predictions were performed in accordance with the proposed method. The results showed that the electric light workplane illuminance can be predicted with high accuracy (±5 lux error with a linear correlation) and that the daylight workplane illuminance can be predicted within ±20 lux (with a linear correlation) for any sky conditions (overcast, clear sky, or variable) with the window system controlled to prevent direct daylight transmission. This method is useful for integrated control of motorized daylighting devices and dimmable electric lights.     

A note on the satisfaction of the boundary conditions for Chebyshev collocation methods in rectangular domains

The way boundary conditions are imposed when applying Chebyshev collocation methods to Poisson and biharmonic-type problems in rectangular domains is investigated. It is shown that careful selection of the number of collocation points leads to a linear system ofn linearly independent equations inn unknowns.     

Semantische Informationsextraktion in medizinischen Informationssystemen

Zusammenfassung Dieser Artikel beschreibt einige Erfahrungen und typische Problemstellungen mit Textmining in der Medizin und gibt einen Einblick in aktuelle und zukünftige Herausforderungen in Forschung & Entwicklung. Interessant ist n?mlich, dass auch im ,,Multimedia-Zeitalter“ die meiste Information immer noch als ,,Text“ vorliegt. Mithilfe von statistischen und linguistischen Verfahren wird mit sogenannter ,,Textmining-Software“ versucht, aus Freitexten Information ,,heraus zu schürfen“ (deshalb ,,Textmining“). Allerdings ist es damit noch nicht genug. Der n?chste Schritt besteht darin, die Information sowohl nutzbar als auch brauchbar zu machen. Die jeweiligen End-Benutzerinnen und End-Benutzer müssen in die Lage versetzt werden, auf der Basis der gewonnenen Information deren Wissen zu erweitern. In unserem konkreten Fall sollen damit Entscheidungen im Rahmen ?rztlichen Handelns unterstützt werden. Probleml?sungen in diesem Bereich erfordern eine holistische Sicht- und Herangehensweise. Daher wird es immer wichtiger, Erkenntnisse aus Informatik und Psychologie zusammenflie?en zu lassen und auf systemischer Ebene technologisch umzusetzen.     

Amtshaftung bei Bauführung im Hochwassergebiet; fehlerhafter Flächenwidmungsplan; Nachforschungspflichten der Gemeinde

Bestehen ausreichende Anhaltspunkte für die Hochwassergef?hrdung, ist die Gemeinde verpflichtet, sich durch Nachforschungen Gewissheit über das Vorliegen oder Nichtvorliegen eines Hochwasserabflussgebietes gem § 38 Abs 3 WRG zu verschaffen. Liegt ein solches vor, hat sie gem § 12 Abs 1 Z 2 krnt GplG dieses im Fl?chenwidmungsplan ersichtlich zu machen. Erteilt die Gemeinde eine Baubewilligung ohne diese von der Erteilung einer wasserrechtlichen Bewilligung abh?ngig zu machen, haftet sie für die Kosten der Bauführung, die bei gesetzes-konformer Vorgangsweise unterlassen worden w?re.     

Efficient allylation of cellulose in dimethyl sulfoxide/tetrabutylammonium fluoride trihydrate

The cellulose solvent dimethyl sulfoxide (DMSO)/tetrabutylammonium fluoride trihydrate (TBAF) was successfully applied as reaction medium for the synthesis of allyl cellulose by conversion of the polymer with allyl chloride in the presence of solid NaOH. Samples with degree of substitution from 0.50 to 2.98 were accessible by varying the molar ratio anhydroglucose unit:allyl chloride:NaOH and reaction time. DMSO/TBAF was found to be an efficient reaction medium for the preparation of highly functionalized samples from spruce sulfite pulp with degree of polymerization of about 500 even in a scale of 50 g. The allyl cellulose samples were characterized by means of FTIR- and NMR spectroscopy. Size exclusion chromatography revealed negligible polymer degradation during synthesis and purification of the samples.     

Three-dimensional MHD high-resolution computations with CWENO employing adaptive mesh refinement

Until recently, numerical simulations of discontinuities in highly super-Alfvénic plasmas have been severely limited by comparatively crude resolution and accuracy. Significant progress in the numerical simulation of such plasmas was achieved with the recently implemented Central Weighted Essentially Non-Oscillatory (CWENO) scheme. Combining this technique with that of adaptive mesh refinement (AMR), we have developed a third-order numerical scheme, which is able to efficiently capture strong gradients on spatial scales being small compared to the overall scale of the plasma system considered. Here, we first describe important algorithmic aspects of the scheme as well as the physics included in it. Second, we present the results of various performance tests. And, third, we illustrate its application to ‘real world problems’ using the example of the dynamics of a Sedov-type explosion.     

Three dimensional boundary element analysis of internal cracks under sliding contact load with a spherical indenter

Using boundary element based three dimensional modelling for linear fracture mechanics, we present an analysis of cracking in a homogeneous medium subject to contact load. The proposed iterative solution procedure allows a simultaneous treatment of a reasonable number of partially closed cracks. It is shown that the most probable direction of propagation of a vertical internal crack is strongly dependent on its size compared to the contact radius and its location with respect to the axis of maximum normal load.