Copper(II) ion removal from aqueous solutions using biosorption technology: thermodynamic and SEM–EDX studies

The present study uses biosorption technology to remove copper(II) ions from aqueous solutions. Mature leaves of neem (Azadirachta indica) were developed into powder form of size 32–45 μm and used as the biosorbent, while copper(II) ion solutions were prepared to be used as adsorbates. Parameters varied include copper(II) ion concentration and adsorption temperature. The neem leaf powder (NLP) dosage which was kept constant at 1.0 g L^?1 and pH was between 5 and 6. Adsorption occurred at a high rate initially and reached equilibrium after 50 min. Adsorption seemed to be more favourable at higher temperatures. Optimal temperature was found to be 333 K, with a high adsorption capacity of 146.30 mg g^?1. Thermodynamic studies showed that the system is spontaneous and endothermic in nature, based on the parameters of Gibbs free energy (?G°), biosorption enthalpy (?H°) and biosorption entropy (?S°) obtained, which gave values of ?2.74, 26.70 and 0.07 kJ mol^?1 K^?1, respectively. The adsorption mechanism was found to be predominantly chemisorption. SEM and EDX results show that copper(II) ions were adsorbed on the micropores of NLP. Results indicate that NLP is a suitable biosorbent for removing copper(II) ions from solutions.     

Soliton dynamics in photonic-crystal fibers for coherent Raman microspectroscopy and microscopy

We describe various generation schemes that employ soliton dynamics in photonic-crystal fibers to generate a red-shifted femtosecond pulse with high efficiency. We then detail how to use this pulse along with the initial femtosecond laser pulse for coherent Raman experiments. We describe various measurement schemes that, though utilizing this pair of femtosecond pulses, mimick the preferred measurement scheme for coherent Raman microspectroscopy where one pulse is transform-limited and of picosecond duration; or for coherent Raman microscopy where both pulses are transform-limited and of picosecond duration. We finally discuss how to increase pulse energy and give some perspective on the realization of a coherent Raman endoscope based on soliton dynamics.     

Influence of mass transfer on thermogravimetric analysis of combustion and gasification reactivity of coke

Non-isothermal TG/DTG measurements are widely used to determine kinetic parameters of oxidation and gasification of carbons, e.g. by multi-heating rate methods. Thereby it is important to avoid spurious effects due to diffusion limitations. In this work, TG/DTG experiments with activated carbon were conducted under isothermal and non-isothermal conditions. The agreement of the experimental results with results of simulations based on the intrinsic kinetics, pore diffusion and external diffusion in/to the sample (crucible) is very good. The simulations show that mass transfer has an unwanted influence on TG measurements, if the concentration of the gaseous reactant (O₂ and CO₂) is too low and/or the heating rate is too high. Based on literature data, the simulation was extended to blast furnace coke with a very low reactivity and to highly reactive coke from pyrolysis of miscanthussinensis. The simulations and theoretical considerations lead to a criterion to exclude the influence of mass transfer on TG measurements a priori. This criterion is valid for combustion as well as for gasification with steam or carbon dioxide.     

The potential for the SCC of titanium alloys under repository-relevant environments for U.S. nuclear waste

Stress corrosion cracking (SCC) is one of the most common corrosion-related causes of premature failure of metal structural components. This paper presents an assessment of the performance of titanium alloys (titanium grade 7 for the drip shield and grade 29 for the structural support), which may be subjected to SCC under proposed U.S. nuclear waste repository environments. The threshold stresses for SCC initiation, SCC crack propagation rates, and the threshold stress intensity factors for titanium grades 7, 28, and 29 are discussed.     

Performance of a self-administered mailed version of the Quality of Well-Being (QWB-SA) questionnaire among older adults

OBJECTIVES: The Quality of Well-Being questionnaire is a measure of health-related quality of life (HRQoL) that has several desirable properties. Its widespread use has been hindered because it is difficult to administer. To overcome this limitation, a new self-administered form has recently been developed. This study examined the feasibility of using the Quality of Well-Being-Self-Administered (QWB-SA) questionnaire in an older population. METHODS: The Quality of Well-Being-Self-Administered questionnaire was sent to 430 community-dwelling individuals aged 65 years and older who were randomly selected from primary care physicians' offices. Response patterns, scaling distributions, and the acceptability of the survey were examined for all respondents. The results of the QWB-SA questionnaire were compared to the Sickness Impact Profile (SIP) and the Medical Outcomes Study 36-item Short-Form Health Survey (SF-36) for those individuals who also had completed the latter two surveys approximately 10 months earlier and whose health had not changed substantially in the meantime. RESULTS: Three hundred and one older adults (70%) responded. The mean QWB-SA questionnaire score was 0.7035. The scores were not skewed, and there were no floor or ceiling effects. The mean time to complete the QWB-SA questionnaire was 14.2 minutes, which was significantly shorter than for the SIP (19.3 minutes) but significantly longer than for the SF-36 (12.5 minutes). Subjects rated their satisfaction with the QWB-SA questionnaire somewhat lower than for the SIP and similar to SF-36. Correlations between the QWB-SA questionnaire and the SIP and SF-36 were moderate and were generally stronger for measures of physical health than for other domains such as mental health. CONCLUSIONS: The self-administered QWB questionnaire was acceptable to older respondents, and it correlated with other measures of health-related quality of life. It can be considered as a candidate for some research applications among older adults.     

Grain boundary segregation in austenitic stainless steels and its effect on intergranular corrosion and stress corrosion cracking

This paper reports a study of grain boundary segregation, intergranular corrosion, and intergranular stress corrosion cracking in austenitic stainless steels. The results show that phosphorus, nitrogen, and sulfur all segregate to grain boundaries in these materials and that they can affect one another's segregation through site compctition. In particular, the results demonstrate that phosphorus segregation can be lowered by the presence of nitrogen and sulfur in the steel. Also, if manganese is present in the steel, sulfur segregation will be greatly decreased as a result of formation of manganese sulfides. Phosphorus, sulfur, and nitrogen will not initiate intergranular corrosion in the modified Strauss test, although if corrosion is initiated by chromium depletion, these elements might enhance the corrosion process. Phosphorus segregation does enhance corrosion in the Huey test, even in steels that have not undergone grain boundary chromium depletion, although there does not appear to be a precise correlation between the depth of corrosion penetration and phosphorus segregation. Intergranular stress corrosion cracking in 288 °C water at a pH of 2.5 and electrochemical potential of OV_SHE can occur in these steels even in the absence of chromium depletion if sulfur is present on the grain boundaries. Phosphorus segregation appears to have very little effect.     

Chaotic noise in superconducting microbridge 4-photon,X-band parametric amplifier

The anomalous noise rise observed in nearly all types of parametric amplifiers based on Josephson junctions has been an intriguing as well as annoying problem for many years. This phenomenon has been most spectactular in microbridge amplifiers. Here we present measurements on externally pumped single microbridge 4-photon unbiased amplifiers, where the slit with the bridge is used as a slotline resonantly coupled to the waveguide in an exceptionally simple coupling scheme. This scheme may be of interest in itself, particularly if the noise problem can be overcome, and in other connections. Up to 16 dB gain was obtained at the top of the waveguide. However, the noise rise was observed as usual. An analog computer study on a model including an input/output circuit was performed. The results are in very good agreement with the experiments. The amplification is heralded by a seemingly chaotic noise rise. this noise is then amplified linearly when gain occurs. Amplification is found to take place very close to where the supercurrent is completely suppressed by the pump. The cause of the noise rise has previously been interpreted as loss of phaselock. However, the power spectra of the time-derivative of the phase show this still to be locked in the region of positive gain. Furthermore, computations of the Lyapunov exponents show one to be positive in the region where gain occurs, reaching a maximum value at the parameters corresponding to maximum gain. We therefore conclude that chaotic noise is indeed present in Josephson junction parametric amplifiers where low-impedance devices such as microbridges with negligible capacitance are used as the active elements.     

Progressive disease after ABMT for Hodgkin's disease

A major limitation of ABMT for relapsed/refractory Hodgkin's disease is disease recurrence post-transplantation. We retrospectively reviewed 68 patients undergoing ABMT from January 1987 to June 1993. All received a uniform preparatory regimen (CBV). The median patient age was 30; 75% received prior radiation therapy and all patients received prior chemotherapy. Thirty-one percent presented at the time of transplantation with tumor masses larger than 10 cm. Sixty-two percent received autologous marrow alone and 38% PBPC with or without autologous bone marrow. Overall and progression-free survival are 43 and 36% at 5 years. Median follow-up for survivors is 59 months. Multivariate analysis revealed that tumor bulk was the most powerful poor prognostic factor for both survival and progression-free survival. Those transplanted with non-bulky tumors had an overall survival and progression-free survival of 52 and 44%, respectively, compared to those transplanted with bulky tumors who had an overall survival and progression-free survival of 22 and 16% (P = 0.03 and P = 0.04, respectively). Twenty-seven patients have relapsed. Four relapsed more than 2 years after ABMT. Four of the 27 patients who have relapsed remain alive, two without evidence of disease. The time after transplant to relapse was prognostically important, with no patients who relapsed within 6 months of ABMT still being alive, compared with 25% of patients who relapsed 7 or more months after ABMT who are still alive. We conclude that salvage therapy for relapse after ABMT is appropriate, as some patients may achieve prolonged survival. The time from transplant to relapse is an important survival predictor.     

Application of tunable excimer lasers to combustion diagnostics: a review

Tunable excimer lasers are being used to produce species-, space-, and time-resolved images of complex gaseous media. These media may be analyzed for composition, density, temperature, or flow velocities. The techniques are, in general, highly selective, sensitive, and nonintrusive and are being made possible by recent technological developments in these UV lasers and in intensified cameras, imaging spectrographs, and fast digital image processing. We describe the needs for laser diagnostics in combustion, the physical mechanisms, the relevant spectroscopy, typical experimental setups, and equipment considerations. Precision and accuracy are discussed on the basis of some simple, but realistic, calculations intended to guide the experimentalist in design considerations and to reveal potential sources of errors in the often difficult conversion of raw data to values for such quantitative parameters as densities or temperatures. Finally we present an overview of previous results, select some examples that show the power of tunable excimer laser diagnostics in combustion, and present some suggestions for future directions.     

Development of a compact fast CCD camera and resonant soft x-ray scattering endstation for time-resolved pump-probe experiments

The designs of a compact, fast CCD (cFCCD) camera, together with a resonant soft x-ray scattering endstation, are presented. The cFCCD camera consists of a highly parallel, custom, thick, high-resistivity CCD, readout by a custom 16-channel application specific integrated circuit to reach the maximum readout rate of 200 frames per second. The camera is mounted on a virtual-axis flip stage inside the RSXS chamber. When this flip stage is coupled to a differentially pumped rotary seal, the detector assembly can rotate about 100°/360° in the vertical/horizontal scattering planes. With a six-degrees-of-freedom cryogenic sample goniometer, this endstation has the capability to detect the superlattice reflections from the electronic orderings showing up in the lower hemisphere. The complete system has been tested at the Advanced Light Source, Lawrence Berkeley National Laboratory, and has been used in multiple experiments at the Linac Coherent Light Source, SLAC National Accelerator Laboratory.