GaAs pHEMT-based technology for microwave applications in a volume MMIC production environment on 150-mm wafers

The establishment of a 150-mm (6-in) gallium arsenide (GaAs) facility is described together with the development of very high yielding and cost-effective semiconductor device technologies and a manufacturing capacity of over 40000 wafers/annum. The background to the demand for very high volumes of RF products for this market is discussed, together with the prospects for future growth. The paper describes recent process development by the utilization of a data-driven yield management system to support the delivery of high-quality RF products to customers. Finally, "end of line" DC and RF testing of finished 150-mm GaAs pHEMT foundry wafers is described, enabling scalar measurements of power, noise, and intermodulation products as well as vector measurements of S-parameters and noise parameters at frequencies of up to 40 GHz.     

Time stepping schemes for coupled displacement and pore pressurē analysis

 The paper investigates the performance of various time stepping schemes for coupled displacement and pore pressure analysis. A number of alternative forms of the automatic time stepping method proposed by Sloan and Abbo (1999a) are also presented. These alternative schemes use different updates for the displacements and pore pressures and also adopt different starting conditions for the iterations. The automatic schemes are compared with an implicit θ-method, as well as an explicit method, through analysis of a variety of problems involving undrained loading, drained loading, and consolidation for Mohr-Coulomb and critical state models. As expected, the numerical results confirm that the explicit scheme is neither accurate nor robust. Although the implicit θ-method is accurate and fast, it fails to give a solution in a number of cases where the time step is large. The automatic schemes are shown to be accurate, fast and generally robust. Two of the automatic schemes proposed never fail to furnish a solution for the cases considered. In addition, all the automatic schemes are able to constrain the time-stepping (temporal integration) error in the displacements and pore pressures to lie near a prescribed tolerance, provided the iteration error tolerance is properly chosen. For complex soil models, it is important that the latter is set sufficiently small in order for the schemes to be able to constrain the time-stepping error to lie within a prescribed tolerance. Dedicated to the memory of Prof. Mike Crisfield, for his cheerfulness and cooperation as a colleague and friend over many years.     

Demonstration of an endurance limit in cast 319 aluminum

An investigation of the fatigue properties of cast W319-T7, an Al-Si-Cu alloy used in automotive engine components, was conducted using ultrasonic testing equipment with operating frequencies of 20 kHz. The stress-life (S-N) behavior at room temperature was determined for three solidification conditions of this alloy, where stresses for fatigue lives ranging from 10⁵ to 10⁹ cycles were determined. The results are compared to fatigue data acquired using servohydraulic equipment operating at 40 Hz. No influence of loading frequency has been observed. A discrete endurance limit is indicated for each of the three solidification conditions of W319-T7. The scientific and practical implications of this result are discussed. A material model presented previously is modified by introducing a crack growth threshold condition in order to predict the observed endurance limits. The model is shown to effectively predict the influence of solidification time on the fatigue properties of W319-T7.     

PERFORMANCE OF THREE STAGE TURBO－EQUALIZATION－DECODING

An increasing demand for high data rate transmission and protection over bandlimited channels with severe inter-symbol interference has resulted in a flurry of activity to improve channel equalization. In conjunction with equalization, channel coding-decoding can be employed to improve system performance. In this letter, the performance of the three stageturbo-equalization-decoding employing log maximum a posteriori probability is experimentally evaluated by a fading simulator. The BER is evaluated using various information sequence and interleaver sizes taking into account that the communication medium is a noisy inter symbol interference channel.     

Ideally selective diisocyanate building blocks: New perspectives for dendrimers and coating binders

Using zirconium (IV) salts as catalyst, the reaction of a diisocyanate carrying one tertiary and one primary isocyanate group (IMCI, DIMP) with alcohols can be conducted with complete regioselectivity. This unique selectivity enables the use of a diisocyanate building block in unprecedented ways. Incomplete regioselectivity of diisocyanates, as commonly encountered in currently commercial ones like IPDI and TDI, inevitably leads to polydisperse products in reaction with polyols. The ultimate monodisperse polymer architecture, dendrimers, can now be made in a facile, straightforward manner using IMCI as the ideal diisocyanate building block. Coating applications of this unique building block are not restricted to these perfect branching polymers, but also include isocyanate-functional coating resins. Without any increase in polydispersity, a hydroxyl-functional polyester can be end-capped with the IMCI diisocyanate and subsequently serve as a crosslinker in powder coatings.     

Influence of aggregate content on the migration coefficient of concrete materials using electrochemical method

In order to investigate the effect of coarse aggregate content on the chloride ion migration coefficient of concrete, specimens with different coarse aggregate volume fractions and two water/cement (w/c) ratios of mortar matrix were used. The chloride ion migration coefficient of concrete is obtained using the electrochemical technique to accelerate chloride ion migration in cement-based material and the experimental results were plotted as a function of the fine aggregate volume fraction. The results are analyzed comparing experimental results and theoretical models that represent the concretes as three-phase composite materials. The three phases are the mortar matrix, the coarse aggregate, and the interfacial transition zone between the two. The chloride ion migration coefficient is used to assess the dilution, tortuosity, interfacial transition zone (ITZ) and, percolation effects of coarse aggregate in concrete. It appears that the dilution and tortuosity effects are a dominant factor affecting the chloride ion migration coefficient of concrete in the low volume fraction of coarse aggregate. As the volume fraction of coarse aggregate increases to 40 and 20% in concrete of w/c ratio 0.35 and 0.45, respectively, the ITZ with percolation effects are significantly.     

Fatigue of Kaowool reinforced aluminum: Effect of shot particle wall thickness

The fatigue performance of Kaowool fiber reinforced 339 aluminum composites at 300°C is limited by spherical thin walled hollow Kaowool shot particles. These act as crack initiation sites particularly when located at the surface. This problem does not occur for thick walled particles or particles filled with the aluminum matrix. The effect of wall thickness (t) is evaluated from finite element analysis of both 2D and 3D models, with and without plasticity. Both models predict that hollow thin walled particles act as defects, while thick walled particles act as reinforcements, this transition being defined by a critical wall thickness (t _c). The 3D model is preferred in that it predicts more accurate and smaller values of t _c. Specifically, the 3D elastic/plastic model predicts that the largest stress concentration occurs for a fractional surface particle and that in this condition t _c = 0.18a, where a is the particle radius. This value agrees with our experimental observation that particles with t > 0.2a do not initiate failures.     

Scheduling in or-parallel Prolog systems: Survey and open problems

Implementation of or-parallel Prolog systems offers a number of interesting scheduling problems. The main issues are the interaction between memory models and scheduling, ordering of multiple solutions, and scheduling of speculative work. The problems occur partly because of the design choices (e.g. the choice of a memory model), and partly because of the desire to maintain observational equivalence between parallel and sequential implementations of Prolog, while achieving high efficiency. In the first part of this paper a common framework for discussing scheduling in or-parallel systems is introduced, and also a collection of issues that must be addressed in such systems is presented. In the second part of the paper we survey a number of solutions to these problems comparing their efficiency whenever possible. We close the survey with a short discussion of open problems.Current association: Carlstedt Elektronik AB     

An intelligent decision theoretic approach to producibility optimization in conceptual design

Product optimization involves selecting design, manufacturing, and support attributes that can produce the best system. Producibility or manufacturability is the term often used to describe the relative ease of manufacturing a product. In complex systems, productibility optimization is a very difficult process, particularly when the values of many attributes are restricted by constraints. One challenge is to develop more universal producibility metrics for the conceptual design phase when design information is limited and drawings are nondimensional. This paper develops a new method for producibility optimization in conceptual design based on a combination of both decision theoretic and expert system techniques. Decision theoretic techniques provide the means to model the design for producibility problem in a manner that can deal with risk, uncertainty, and user (or corporate) preferences, and can effectively integrate diverse factors to provide a measure of the overall worth of a design. The particular decision theoretic approach employed is based on multi-attribute utility theory. An illustrative example of the methodology is applied to the conceptual design of a structural composite part.     

The nature and role of incoherent interphase interfaces in diffusional solid-solid phase transformations

In this article, some views on the nature of incoherent interphase interfaces, and their role in the nucleation and growth processes governing the evolution of microstructure in solid-state diffusional transformations (reconstructive transformations), are explored. It is argued that essentially incoherent interfaces can be involved in the initiation and propagation of polymorphic transformations and massive transformations as well as in various precipitation phenomena in metallic and ceramic systems. Similar views have already been advanced earlier in connection with studies of massive transformations. Faceting along the interphase interface during nucleation and growth can derive from thermodynamic, kinetic, and crystallographic factors independent of the bicrystallography of the conjugate phases. This idiomorphic behavior can be relevant to both intergranular and intragranular phase formation. The concept of one-dimensional (1-D) commensuration of phases through plane edge-to-edge/row matching is an interesting extension of the classic ideas of coherency and bicrystallography and potentially important in characterizing the behavior of certain types of boundaries. However, the general importance of these geometrical relations in real and reciprocal space will depend on the depth of the energy wells in orientation space associated with these special boundaries. This article is based on a presentation made in the “Hume-Rothery Symposium on Structure and Diffusional Growth Mechanisms of Irrational Interphase Boundaries,” which occurred during the TMS Winter meeting, March 15–17, 2004, in Charlotte, NC, under the auspices of the TMS Alloy Phases Committee and the co-sponsorship of the TMS-ASM Phase Transformations Committee.