Requirements for a COTS software component: A case study

The goal of the GUARDS project is to design and develop a generic fault-tolerant computer architecture that can be built from predefined standardised components. The architecture favours the use of commercial off-the-shelf (COTS) hardware and software components. However, the assessment and selection of COTS components is a non-trivial task as it requires balancing a myriad of requirements from end-users and the preliminary architecture design. In this paper, we present the requirements and assessment criteria for a specific COTS software component, the operating system kernel. As an interface specification constitutes a major compatibility criterion for the selection of COTS components in GUARDS, a particular emphasis is placed on operating system conformance to the POSIX 1003.1 standard. We discuss the general lessons learned from the assessment process and raise a number of questions relevant to the assessment of any COTS software component.     

Performance Comparison of Four Fiber-Reinforced Polymer Deck Panels

In an effort to assess the constructability and performance of bridges with fiber-reinforced polymer (FRP) composite decks, the short-term and long-term responses of a 207 m, five-span bridge retrofitted with four different FRP panel systems were monitored. The overall aspects of the panel systems, connection details, and construction techniques are presented prior to presentation of the observed and measured responses. Key design parameters (impact factors, girder distribution factors, and level of composite action) for FRP and reinforced concrete decks are evaluated. This paper demonstrates that FRP replacement decks are a viable alternative to reinforced concrete decks and identifies the differences in performances of various FRP deck systems. Two of the FRP panel systems were found to perform considerably better than the other deck systems. Issues that may reduce the service life of FRP deck systems are presented and discussed.     

绿松石结构的致密性对其颜色量化研究的影响

绿松石的结构致密性对其颜色量化研究工作存在重要影响。采用国际公认的色度学变量CIE 1976色差(ΔE)来表征绿松石样品在特定区域内颜色的不均一性,通过静水称重法和原子力显微镜(AFM)来表征结构致密性的体相和表相特征。结果发现,质地疏松绿松石存在较大色差、较大的表面粗糙度及较小的相对密度。激光剥蚀电感耦合等离子质谱仪(LA-ICP-MS)研究绿松石成分显示,疏松绿松石样品中致色元素含量呈现较大的测量不确定性,存在很严重的随激光剥蚀时间延长而迅速衰减的现象,而致密绿松石样品并无此现象。出土疏松绿松石样品的受沁程度和色差也明显大于致密样品。相对而言,高致密性绿松石具有相对密度较大、表面平滑度较高、颜色分布较为均一、致色元素分布较为规律、抗污染能力较强等优良特征。因此,在后续绿松石颜色量化分级工作当中,对致密性进行严格定量显得尤为必要。     

Virtual network embedding: ensuring correctness and optimality by construction using model transformation and integer linear programming techniques

Software and Systems Modeling - Virtualization technology allows service providers to operate data centers in a cost-effective and scalable manner. The data center network (substrate network) and...     

Why are Tailored Messages More Effective? A Multiple Mediation Analysis of a Breast Cancer Screening Intervention

Past research has found that tailoring increases the persuasive effectiveness of a message. However, the observed effect has been small and the explanatory mechanism remains unknown. To address these shortcomings, a tailoring software program was created that personalized breast cancer screening pamphlets according to risk, health belief model constructs, and visual preference. Women aged 40 and older (N = 119) participated in a 2 (Tailored vs. Stock Message) × 2 (Charts/Graphs vs. Illustrated Visuals) × 3 (Nested Replications of the Visuals) experiment. Participants provided with tailored illustrated pamphlets expressed greater breast cancer screening intentions than those provided with other pamphlets. In a test of 10 different mediators, perceived message relevance was found to fully mediate the Tailoring × Visual interaction.     

Data Work: How Energy Advisors and Clients Make IoT Data Accountable

We present fieldwork findings from the deployment of an interactive sensing system that supports the work of energy advisors who give face-to-face advice to low-income households in the UK. We focus on how the system and the data it produced are articulated in the interactions between professional energy advisors and their clients, and how they collaboratively anticipate, rehearse, and perform data work. In addition to documenting how the system was appropriated in advisory work, we elaborate the ‘overhead cost’ of building collaborative action into connected devices and sensing systems, and the commensurate need to support discrete workflows and accountability systems to enable the methodical incorporation of the IoT into collaborative action. We contribute an elaboration of the social, collaborative methods of data work relevant to those who seek to design and study collaborative IoT systems.     

DOA estimation of wideband sources without estimating the number of sources

In this paper, we propose a new technique to estimate wideband source directions from the sensor snapshots without requiring to know the number of sources present in the scenario. This work is motivated by the fact that the existing model order estimation (number of sources) techniques for wideband source scenario are either inaccurate or computationally expensive. Direction-of-arrival (DOA) estimation is realized using a beamformer framework which imposes nulls in the spatial spectrum along the source directions. The null width along the frequency axis is widened by introducing a new data dependent term into the optimization problem, thus achieving wideband capability. Furthermore, the temporal processing of the data snapshots drastically reduces the number of snapshots required for wideband DOA estimation. The effectiveness of the proposed formulation is studied with simulated experiments.     

Ultrasonic spray pyrolysis synthesis of Ag/TiO2 nanocomposite photocatalysts for simultaneous H2 production and CO2 reduction

Simultaneous photocatalytic hydrogen production and CO₂ reduction (to form CO and CH₄) from water using methanol as a hole scavenger were investigated using silver-modified TiO₂ (Ag/TiO₂) nanocomposite catalysts. A simple ultrasonic spray pyrolysis (SP) method was used to prepare mesoporous Ag/TiO₂ composite particles using TiO₂ (P25) and AgNO₃ as the precursors. The material properties and photocatalytic activities were compared with those prepared by a conventional wet-impregnation (WI) method. It was found that the samples prepared by the SP method had a larger specific surface area and a better dispersion of Ag nanoparticles on TiO₂ than those prepared by the WI method, and as a result, the SP samples showed much higher photocatalytic activities toward H₂ production and CO₂ reduction. The optimal Ag concentration on TiO₂ was found to be 2 wt%. The H₂ production rate of the 2% Ag/TiO₂–SP sample exhibited a six-fold enhancement compared with the 2% Ag/TiO₂–WI sample and a sixty-fold enhancement compared with bare TiO₂. The molar ratio of H₂ and CO in the final products can be tuned in the range from 2 to 10 by varying the reaction gas composition, suggesting a viable way of producing syngas (a mixture of H₂ and CO) from CO₂ and water using the prepared Ag/TiO₂ catalysts with energy input from the sun.