This paper presents a preform design method which employs an alternative boundary node release criterion in the finite element simulation of backward deformation of forging processes. The method makes use of the shape complexity factor which provides an effective measure of forging difficulty. The objective is to release die contacting nodes in a sequence which will minimize the geometric complexity throughout the backward deformation simulation. This is done by calculating the effect of releasing each of a select group of boundary element nodes at each finite element solution step. The particular detached node which results in the minimum shape complexity factor will be released for the current step. This process continues for each backward step until the last few nodes remain in contact. This design method is demonstrated through the simulated forging of an integrated blade and rotor turbine disk blank. A preform shape developed by this method is compared with an empirically designed preform. Performance parameters for comparison include die fill, flash volume, effective strain variance, frictional power and die load. Comparing the results of the forward simulations indicates improved performance of the preform design using FEM based backward deformation method over that of the empirical design. 相似文献
Since the use of network-based storage as a cloud computing service [Storage as a Service (StaaS)] becomes ubiquitous, users who store data in the cloud are exposed to risk and potentially severe consequences. Therefore, individuals should carefully consider security and privacy issues when using StaaS. Drawing upon the principle of self-preservation and the theory of protection motivation, this study develops a research model explaining the mechanisms leading to the development of a protection strategy for individuals’ safe use of StaaS and empirically tests the proposed model. The results show that the natural propensity to trust, an individual trait, influences an individual’s need for privacy. This, in turn, along with perception of privacy risk, significantly affects individuals’ perception of the need to protect themselves. Three coping appraisal factors, preventive measures, self-efficacy, and willingness to incur cost of prevention, together with the individual perceived need to protect self, directly and positively affect users’ need to develop a protection strategy in a cloud computing environment. Theoretical and practical implications are discussed. 相似文献
The performance of spreadsheet users was compared for two modes of input to the computer, keyboard and automated speech recognition (ASR). Subjects from both an expert group and a novice group were also classified by decision style. Dependent measures were task completion time, accuracy, keystroke count, correction count, and user confidence. Results for a speaker‐dependent, discrete‐word recognizer showed that, for both simple data input and more complex analytical spreadsheet tasks, neither the experts nor the novices performed more effectively using ASR. However, both groups expressed the desirability of having speech input as an option for desktop computing. 相似文献
This paper outlines the major motivating factors concerning a novel collaborative project between Edinburgh College of Art and Edinburgh Virtual Environment Centre. The Tacitus project will investigate the use of multi-modal virtual environments, specifically, the haptic (touch) modality, with regards to the creative processes employed by designers working within the field of applied arts. The salient areas of research are described, and the methods by which information regarding these areas will be obtained are considered. Initial investigations have revealed a strong need to mimic the traditional applied artists' workspaces, with co-location of visual and haptic cues a priority. 相似文献
Integrins exhibit reversible changes in their ability to bind ligands and these changes enable transient cell adhesion. We recently showed that leukocyte integrin CR3 (complement receptor type three, CD11b/CD18, alpha m beta 2) may be purified in a form that is either capable or incapable of binding soluble, monomeric ligand and that "inactive" CR3 may be rendered capable of binding ligand by addition of an anti-CR3 mAb known as KIM-127 (Cai and Wright, JBC. 270: 14358, 1995). Here, we demonstrate that active CR3 may be rendered inactive by treatment of immobilized receptor with EDTA. EDTA-treated CR3 failed to bind ligand even in the presence of mM Ca2+ and Mg2+, suggesting that EDTA-treatment caused a change in the receptor that is not readily reversed. EDTA-treated receptor did, however, bind ligand upon addition of KIM-127 plus Mg2+ with an affinity (17.8 +/- 4.5 nM) similar to untreated, active receptor (12.5 +/- 4.7 nM). EDTA-treated CR3 thus exhibits the properties of inactive CR3, in which the ligand binding site is cryptic but subject to exposure by KIM-127. A candidate for the cryptic ligand binding site is the I-domain, a Mg2+-binding region in the alpha chain of CR3. We found that monomeric C3bi binds directly to recombinant I-domain in a Mg(2+)-dependent fashion with an affinity of 300 +/- 113 nM. These results thus suggest that CR3 may be inactivated by removing tightly bound divalent cation from a cryptic site in CR3. 相似文献
3D printing of conductive elastomers is a promising route to personalized health monitoring applications due to its flexibility and biocompatibility. Here, a one-part, highly conductive, flexible, stretchable, 3D printable carbon nanotube (CNT)-silicone composite is developed and thoroughly characterized. The one-part nature of the inks: i) enables printing without prior mixing and cures under ambient conditions; ii) allows direct dispensing at ≈100 µm resolution printability on nonpolar and polar substrates; iii) forms both self-supporting and high-aspect-ratio structures, key aspects in additive biomanufacturing that eliminate the need for sacrificial layers; and iv) lends efficient, reproducible, and highly sensitive responses to various tensile and compressive stimuli. The high electrical and thermal conductivity of the CNT-silicone composite is further extended to facilitate use as a flexible and stretchable heating element, with applications in body temperature regulation, water distillation, and dual temperature sensing and Joule heating. Overall, the facile fabrication of this composite points to excellent synergy with direct ink writing and can be used to prepare patient-specific wearable electronics for motion detection and cardiac and respiratory monitoring devices and toward advanced personal health tracking and bionic skin applications. 相似文献
Prior studies on carbon-filler based, conductive polymer composites have mainly investigated how conductive filler morphology and concentration can tailor a material's electrical conductivity and overlooks the effects of filler alignment due to the difficulty to control and quickly quantify the filler alignment. Here, direct ink write 3D printing's unique ability is utilized to control carbon fiber alignment with a single process parameter, velocity ratio, to instantaneously activate or deactivate the electrical network in composites. Maximum electrical conductivity is achieved by randomly aligning carbon fibers that enhances the chance of direct fiber-to-fiber contact and, thus, activating the electrical network. However, aligning the fibers by increasing the velocity ratio disrupts the electrical network by minimizing fiber-to-fiber contact that resulted in a drastic decrease in electrical conductivity by as much as five orders of magnitude in both short and long carbon fiber composites. With this study, this study demonstrates that electrically conductive or insulative composites can be fabricated sequentially with a single ink. This novel ability to instantaneously control the electrical conductivity of carbon fiber reinforced composites allow to directly embed conductive pathways into designs to 3D print multifunctional composites that are capable of localized heating and self-sensing. 相似文献
Blood oxygenation can be measured using magnetic resonance using the paramagnetic effect of deoxy-haemoglobin, which decreases the \(\textit{T}_{2}\) relaxation time of blood. This \(\textit{T}_{2}\) contrast has been well characterised at the \(\textit{B}_{{0}}\) fields used in MRI (1.5 T and above). However, few studies have characterised this effect at lower magnetic fields. Here, the feasibility of blood oximetry at low field based on \(\textit{T}_{2}\) changes that are within a physiological relevant range is explored. This study could be used for specifying requirements for construction of a monitoring device based on low field permanent magnet systems.
Methods
A continuous flow circuit was used to control parameters such as oxygen saturation and temperature in a sample of blood. It flowed through a variable field magnet, where CPMG experiments were performed to measure its \(\textit{T}_{2}\). In addition, the oxygen saturation was monitored by an optical sensor for comparison with the \(\textit{T}_{2}\) changes.
Results
These results show that at low \(\textit{B}_{{0}}\) fields, the change in blood \(\textit{T}_{2}\) due to oxygenation is small, but still detectable. The data measured at low fields are also in agreement with theoretical models for the oxy-deoxy \(\textit{T}_{2}\) effect.
Conclusion
\(\textit{T}_{2}\) changes in blood due to oxygenation were observed at fields as low as 0.1 T. These results suggest that low field NMR relaxometry devices around 0.3 T could be designed to detect changes in blood oxygenation.