Viscosity of compressed cold lake bitumen

Viscosity data over a temperature range of 37-115°C and a pressure range of 0-10 MPa gauge are presented for a Cold Lake bitumen sample. These data show that the compression of Cold Lake bitumen results in a significant increase in its viscosity. Results are compared with those from a similar study on an Athabasca bitumen sample. Also presented are two correlations for the effects of pressure and temperature on the viscosity of Cold Lake bitumen.     

Photoelastic Studies on Rubber-to-Rubber Joints

Photoelasticity is a method which yields information on the principal stress difference and orientation in a composite structure. Various problems associated with this technique, especially those concerning the fundamental relationship between the fringe order and the stress, have yet to be investigated. A few studies of this relationship in a universal stress state have been presented, particularly in the field of rubber-to-metal and rubber-to-fabric composites, but no evaluations have so far been made in the field of rubber-to-rubber joints. Applying the photoelastic method, we report our observations on the stress distribution in a natural rubber to natural rubber joint subjected to uniaxial tension. A comparison between the results of experimental photoelastic studies and the corresponding computer modelling has been illustrated. The theoretical displacement pattern of the angular joints of bi-rubber part has also been highlighted.     

Modelling a circulating fluidized bed riser reactor with gas—solids downflow at the wall

A predictive model was developed for the fully developed zone of a circulating fluidized bed (CFB) riser reactor operating in the fast fluidization regime that overcomes limitations of existing models. The model accounts for the upward flow of gas and solids in the core and downward flow of the two phases in the annulus. Additionally, a numerical solution methodology for the simulation of a riser reactor employing the hydrodynamic model was devised. A simulation was performed using the fast, main Claus reaction to demonstrate the effects of backmixing in the fast fluidization regime. It was found that the molar flow rates of the reactants leaving a fast fluidized CFB riser reactor were significantly higher than those leaving an identical reactor operating in the pneumatic transport regime.     

Switching to Directional Antennas with Constant Increase in Radius and Hop Distance

For any angle α<2π, we show that any connected communication graph that is induced by a set P of n transceivers using omni-directional antennas of radius 1, can be replaced by a strongly connected communication graph, in which each transceiver in P is equipped with a directional antenna of angle α and radius r _dir, for some constant r _dir=r _dir(α). Moreover, the new communication graph is a c-spanner of the original graph, for some constant c=c(α), with respect to number of hops.     

Prediction of properties of rubber by using artificial neural networks

Different rubber formulations were designed using nitrile rubber and a mixed crosslinking system consisting of sulfur/accelerator and electron beam radiation. Based on the experimental results, an artificial neural network (ANN) was constructed to simulate the mechanical properties and volume fraction of rubber. The ANN could predict accurately the above properties for a series of nitrile rubber compounds. However, the number of training data played a key role in the ANN predictive quality. In addition, the more complex the nonlinear relation between input and output was, the larger was the number of training dataset required. The predicted results were further validated using another mathematical model. The constructed ANN was verified with a completely different styrene butadiene rubber system. The prediction was found to be extremely good. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2227–2237, 2006     

Rubber–clay nanocomposite by solution blending

Ethylene vinyl acetate rubber (45% vinyl acetate content, EVA‐45) and organomodified clay (12Me‐MMT) composites were prepared by solution blending of the rubber and the clay. A combination of X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy studies showed that the composites obtained are on the nanometer scale. The measurements of the dynamic mechanical properties for different compositions over a temperature range (?100 to +100°C) showed that the storage moduli of these rubber–clay nanocomposites are higher above the glass to rubber transition temperature compared to the neat rubber. The tensile strength of the nanocomposites is about 1.6 times higher than that of the EVA‐45. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2216–2220, 2003     

Gas hold-up in non-newtonian solutions in a bubble column with internals

Bubble characteristics and gas hold-up were studied in a two phase (air-aqueous CMC solution) bubble column provided with helical coils and straight tubes as internals. The effects of superficial gas velocity, rheological properties, and volume fraction covered by the internals, on gas hold-up were studied. Hold-up values determined directly and by simultaneous pressure drop measurements matched well. Enhancement of gas hold-up values up to 55 per cent was achieved in systems using internals. The gas hold-up results were also compared with the values obtained from correlations reported in the literature.     

High-Thermal-Conductivity Aluminum Nitride Ceramics: The Effect of Thermodynamic, Kinetic, and Microstructural Factors

Improvement in the thermal conductivity of aluminum nitride (AlN) can be realized by additives that have a high thermodynamic affinity toward alumina (Al₂O₃), as is clearly demonstrated in the aluminum nitride-yttria (AlN-Y₂O₃) system. A wide variety of lanthanide dopants are compared at equimolar lanthanide oxide:alumina (Ln₂O₃: Al₂O₃, where Ln is a lanthanide element) ratios, with samaria (Sm₂O₃) and lutetia (Lu₂O₃) being the dopants that give the highest- and lowest-thermal-conductivity AlN composites, respectively. The choice of the sintering aid and the dopant level is much more important than the microstructure that evolves during sintering. A contiguous AlN phase provides rapid heat conduction paths, even at short sintering times. AlN contiguity decreases slightly as the annealing times increase in the range of 1–1000 min at 1850°C. However, a substantial increase in thermal conductivity results, because of purification of AlN grains by dissolution-reprecipitation and bulk diffusion. Removal of grain-boundary phases, with a concurrent increase in AlN contiguity, occurs at high annealing temperatures or at long times and is a natural consequence of high dihedral angles (poor wetting) in liquidphase-sintered AlN ceramics.     

Compositional trend analysis on poly(phenylene ether) based thermoplastic elastomers

Detailed statistical trend analysis of thermoplastic elastomers based on poly (phenylene ether) (PPE), polystyrene (PS), ethylene vinyl acetate (EVA) and styrene‐ethylene‐butylene‐styrene (SEBS) was done through Design Expert software by Stat‐Ease. D optimal crossed design was followed to capture the interaction with the parameters. Effect of blend ratio, vinyl acetate (VA) content of EVA, molecular weight (MW) of SEBS and intrinsic viscosity (IV) of PPE on the blend performance (response) was studied in detail. Design of Experiment (DOE) analysis showed the “optimized formulation” of the blend. Increase in PPE‐polystyrene (PS) content increased tensile strength and modulus of the blend, followed by a decrease in strain at break. However, EVA had a reverse effect on tensile strength and modulus. Strain at break increased significantly with increasing SEBS content in the blend. Graphical and numerical optimization showed that superior mechanical properties (tensile strength, strain at break and modulus) could be achieved at VA content ～ 50% at a particular loading of EVA. Low MW SEBS was found to be more compatible with the other components of the blend. Mechanical properties of the quaternary blend were marginally affected with change in IV of PPE in the range of 0.33 to 0.46. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007