Ce and Eu activated Na<Subscript>2</Subscript>Zn<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>4</Subscript>, a new promising novel phosphor

A new efficient phosphor, Eu²⁺/Eu³⁺ and Ce³⁺ activated Na₂Zn₅(PO₄)₄ has been synthesized by solid-state reaction technique at high temperature. X-ray powder diffraction analysis confirmed the formation of Na₂Zn₅(PO₄)₄ host lattice. Scanning electron microscopy indicated that the microstructure of the phosphor consisted of irregular fine grains with a size of about 0·5–2 μm. Photoluminescence excitation spectrum measurements of Ce³⁺ activated Na₂Zn₅(PO₄)₄ show that the phosphor can be efficiently excited by UV-Vis light from 280 to 310 nm to realize emission in the visible (blue) range due to the 5d-4f transition of Ce³⁺ ions which is applicable for scintillation purpose, whereas Eu²⁺/Eu³⁺ activated Na₂Zn₅(PO₄)₄ phosphor emits blue, green and red emission spectrum shows at 487 nm, 546 nm with a dominant peak at 611 nm respectively, due to Eu²⁺/Eu³⁺ ions which is promising candidate for solid state lighting. Therefore, newly synthesised, by low cost and easy technique prepared, novel phosphors may be useful as RGB phosphor for solid state lighting application.     

Ductile structural system reliability analysis using adaptive importance sampling

This paper presents a hybrid technique for efficient system reliability estimation of large ductile framed structures. The proposed procedure starts with a simple enumeration scheme, but quickly changes to an adaptive importance sampling scheme to make the process more efficient and easier to implement. The method solves the problem of including the effect of multiple failure sequences in an importance sampling scheme, for the system reliability estimation of large structures. The enumeration method is used to identify the first complete failure sequence. This failure sequence defines the initial failure domain for starting the adaptive sampling process. A weighted multi-modal sampling density is used to account for the contribution of different regions in the sampling domain to the system failure probability. As the simulation progresses, the failure domain is gradually modified to include the effect of other significant failure sequences and arrive at an accurate estimate of the system failure probability.     

Understanding nanoparticle formation by a wire explosion process through experimental and modelling studies

A wire explosion process (WEP) has been used to produce nano aluminium powder in nitrogen, argon and helium atmospheres. The impact of energy deposited into the exploding conductor on the size and shape of the particles was analysed using TEM analysis, which forms the first part of the study. It is observed that the higher the energy deposited, the smaller the particles formed. In the second part, modelling studies were carried out by solving the general dynamic equation through the nodal approach, and the particle size distributions were predicted. It is realized that, at the point of high saturation ratio and nucleation rate, the size of the critical nucleus formed is low. The particle size distribution predicted by the model correlates well with the experimental results. Time-series analysis of particle formation indicates that particles of lower dimensions form and, in the process of coagulation, larger particles are formed. It is realized that the plasma formed during the explosion plays a major role in the particle formation, and the modelling studies confirm that particle formation is not an instantaneous process but requires a certain time period to form stable sizes and shapes.     

Exosomal Metabolic Signatures Are Associated with Differential Response to Neoadjuvant Chemotherapy in Patients with Breast Cancer

Neoadjuvant chemotherapy (NAC) is commonly used in breast cancer (BC) patients to increase eligibility for breast-conserving surgery. Only 30% of patients with BC show pathologic complete response (pCR) after NAC, and residual disease (RD) is associated with poor long-term prognosis. A critical barrier to improving NAC outcomes in patients with BC is the limited understanding of the mechanisms underlying differential treatment outcomes. In this study, we evaluated the ability of exosomal metabolic profiles to predict NAC response in patients with BC. Exosomes isolated from the plasma of patients after NAC were used for metabolomic analyses to identify exosomal metabolic signatures associated with the NAC response. Among the 16 BC patients who received NAC, eight had a pCR, and eight had RD. Patients with RD had 2.52-fold higher exosome concentration in their plasma than those with pCR and showed significant enrichment of various metabolic pathways, including citrate cycle, urea cycle, porphyrin metabolism, glycolysis, and gluconeogenesis. Additionally, the relative exosomal levels of succinate and lactate were significantly higher in patients with RD than in those with pCR. These data suggest that plasma exosomal metabolic signatures could be associated with differential NAC outcomes in BC patients and provide insight into the metabolic determinants of NAC response in patients with BC.     

Computer-Aided Design and Synthesis of (Functionalized quinazoline)–(α-substituted coumarin)–arylsulfonate Conjugates against Chikungunya Virus

Chikungunya virus (CHIKV) has repeatedly spread via the bite of an infected mosquito and affected more than 100 countries. The disease poses threats to public health and the economy in the infected locations. Many efforts have been devoted to identifying compounds that could inhibit CHIKV. Unfortunately, successful clinical candidates have not been found yet. Computations through the simulating recognition process were performed on complexation of the nsP3 protein of CHIKV with the structures of triply conjugated drug lead candidates. The outcomes provided the aid on rational design of functionalized quinazoline-(α-substituted coumarin)-arylsulfonate compounds to inhibit CHIKV in Vero cells. The molecular docking studies showed a void space around the β carbon atom of coumarin when a substituent was attached at the α position. The formed vacancy offered a good chance for a Michael addition to take place owing to steric and electronic effects. The best conjugate containing a quinazolinone moiety exhibited potency with EC₅₀ = 6.46 μM, low toxicity with CC₅₀ = 59.7 μM, and the selective index (SI) = 9.24. Furthermore, the corresponding 4-anilinoquinazoline derivative improved the anti-CHIKV potency to EC₅₀ = 3.84 μM, CC₅₀ = 72.3 μM, and SI = 18.8. The conjugate with 4-anilinoquinazoline exhibited stronger binding affinity towards the macro domain than that with quinazolinone via hydrophobic and hydrogen bond interactions.     

Tribological Behavior of AZ31 Alloy Against Si3N4 Using In-vitro and In-silico Submodeling Approach for Human Hip Prosthesis

Silicon - The use of magnesium alloy (AZ31) has profound applications in biomedical field as a substitute for joint replacements. The present study aims at analyzing the tribological behavior of...     

Fabrication of CeO2 microspheres by internal gelation process using flow-focusing droplet generator

Sphere-pac fuel is an alternative nuclear fuel technology in which microspheres of two or more sizes are utilized to fill the cladding tube in place of the more conventional single-size fuel pellets. This provides leeway for adjusting the fuel pellet packing density and resulting cladding tube porosity. The current investigation makes use of a flow-focusing droplet generator made from stainless steel (S.S.) 316 L, with a channel internal diameter (I.D.) of 0.5, 0.8, 1, and 3 mm. These microspheres were supposed to be of actinide oxide but here, cerium has been chosen as a surrogate of plutonium. Detailed information about the flow-focusing droplet generator, internal gelation process, and sphere-pac fuel has been provided. The size and size distribution of ceria microspheres were investigated by varying the flow rates of the continuous and dispersed phase. The characterization of ceria microspheres has been conducted using techniques such as scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Brunauer–Emmett–Teller (BET) analyses. The size of prepared monodisperse microspheres was controlled precisely (within ±2%) in the range of 498–2888 μm using four S.S. 316 L flow-focusing droplet generators with channel I.D. 0.5, 0.8, 1, and 3 mm, respectively, and the coefficient of variation of the size distribution was found to be less than 2%.     

Mechanical Characterization Studies of Aluminium Alloy 7075 Based Nanocomposites

Silicon - In the present study, addition of nano silicon carbide particulates (nSiCp) in the matrix of aluminium alloy 7075 (AA7075) in different weight proportions (0 %, 0.5 %,...