Interchain crosslinking between NBR and polyacrylic rubber and effect on (i) processibility and blend-morphology

Flow behaviour of NBR and polyacrylic rubber blends have been studied throughout the entire composition ranges. The effect of preheating of the blends is also studied in order to understand the interchain crosslinking. Viscosity, extrudate swell, power law indices, have been studied as a function of shear rate and blend ratio. The shearing accompanied by blend ratio has a predominent effect on the rheological behaviour of the preheated blends due to microgel formation. From the rheological behaviour it appears that there is a phase inversion at around 50% of NBR, however, preheating does not change this trend. © 1994 John Wiley & Sons, Inc.     

The differential effect of polymyxin B1 on guinea pig lung mitochondrial and microsomal glycerophosphate acyltransferase

The activities of guinea pig lung mitochondrial and microsomal glycerophosphate acyltransferase differed in sensitivity to polymyxin B₁. At an antibiotic concentration of 1 mg/ml, the mitochondrial enzyme activity was stimulated twofold, but the microsomal enzyme activity was completely inhibited. Furthermore, the mitochondrial enzyme activity was stimulated by polymyxin B₁ without the addition of exogenous acyl-CoA. Additional experiments ruled out the possibility of polymyxin B₁ acting as a substrate for the mitochondrial acyltransferase. These results suggest either that the polymyxin B₁ sensitivity of mitochondrial and microsomal glycerophosphate acyltransferase is different or that their accessibility to substrates is different because the two isoenzymes are located differently in the different phospholipid microenvironment of the membranes.     

Retarding and antioxidant activity of 1-cyclohexylthio-2-mercaptobenzimidazole in the vulcanization of NR accelerated by thiocarbamyl sulfenamide

The effect of 1-cyclohexylthio-2-mercaptobenzimidazole (CMB) on the vulcanization of NR accelerated by N-oxydiethylene thiocarbamyl-N′-oxydiethylene sulfenamide (OTOS) has been studied. It is found that CMB delays the onset of cure and generates 2-mercaptobenzimidazole during vulcanization. The results indicate the retarding as well as antioxidant activity of CMB.     

Occurrence of ethanolamine- and choline-containing plasmalogens in adipose tissue

Analysis of phospholipids in porcine, bovine and rat adipose tissue revealed a relatively high level of plasmalogens (O-alk-1-enyl lipids). About 50% of the ethanolamine phospholipids in the pig and beef samples consisted of alk-1-enylacylglycerophosphorylethanolamine, and the corresponding value for the rat sample was near 35%. In the ethanolamine and choline phospholipid fractions, theO-alk-1-enyl moieties were almost exclusively 16∶0, 18∶0 and 18∶1, whereas the acyl moieties had chain lengths ranging from 16 to 22 carbon atoms with a high degree of unsaturation.     

Insecticidal Effects of Organotin(IV) Compounds on Plutella Xylostella (L.) Larvae. II. Inhibitory Potencies Against Acetylcholinesterase and Evidence for Synergism in Tests With Bacillus Thuringiensis(BER.) and Malathion

Features of pesticide synergism and acetylcholinesterase (AChE) inhibition (in vitro) were studied using a selected range of organotin compounds against the early 4th instar larvae of a highly resistant strain of the diamondback moth (DBM), Plutella xylostella, a major universal pest of cruciferous vegetables.Fourteen triorganotin compounds were evaluated for their ability to enhance the toxicity of the microbial insecticide, Bacillus thuringiensis (BT) and of the commercial insecticide, Malathion to Plutella xylostella larvae. Supplemental synergism was observed with triphenyl- and tricyclopentyltin hydroxides in combinations with Bacillus thuringiensis. Increased synergism was observed with an increase in the number of cyclopentyl groups on tin in the mixed series, Cyp(n) Ph(3-n) SnX, where X = OH, and 1-(1,2,4-triazolyl). The combination of (p-chlorophenyl)diphenyltin N,N-dimethyldithiocarbamate at LD(10) and LD(25) concentrations with sublethal concentrations of Malathion as well as of tricyclohexyltin methanesulphonate at the 0.01% (w/v) concentration with Malathion exerted strong synergistic effects (supplemental synergism) with toxicity index (T.I) values of 7.2, 19.8 and 10.1, respectively.Studies on the in vitro inhibition of acetylcholinesterase prepared from the DBM larvae showed that while most of the triorganotin Compounds tested were without effect on the enzyme, compounds containing the thiocarbamylacetate or the dithiocarbamylacetate moieties demonstrated appreciable levels of inhibition, being comparable in efficacy to commercial grades of Malathion and Methomyl.     

Studying trivalent/bivalent metal ion doped TiO2 as p-TiO2 in bipolar heterojunction devices

Trivalent/bivalent metal ions doped TiO₂ thin films (M_xTi_1−xO₂, M = Cr³⁺, Fe³⁺, Ni²⁺, Co²⁺, Mn²⁺ and x = 0.01, 0.05, 0.1, 0.15, 0.2) were deposited on Indium–tin oxide (ITO) coated glass substrates by spin coating technique. X-ray photoelectron spectroscopy (XPS) showed Ti⁴⁺ oxidation state of the Ti2p band in the doped p-TiO₂. The homogenous M_xTi_1−xO₂ was used to support n-ZnO thin films with thickness ∼40–80 nm and vertically aligned n-ZnO nanorods (NR) with length ∼300 nm and 1.5 μm. Current (I)–voltage (V) characteristics for the Ag/n-ZnO/M_xTi_1−xO₂/ITO/glass assembly showed rectifying behavior with small turn-on voltages (V₀) < 1 V. The ideality factor (η) and the resistances in both forward and reverse bias were calculated. The temperature dependence performance of these bipolar devices was performed and variation of the parameters with temperature was studied.     

Localized in situ polymerization on graphene surfaces for stabilized graphene dispersions

We demonstrate a novel in situ polymerization technique to develop localized polymer coatings on the surface of dispersed pristine graphene sheets. Graphene sheets show great promise as strong, conductive fillers in polymer nanocomposites; however, difficulties in dispersion quality and interfacial strength between filler and matrix have been a persistent problem for graphene-based nanocomposites, particularly for pristine graphene. With this in mind, a physisorbed polymer layer is used to stabilize graphene sheets in solution. To create this protective layer, we formed an organic microenvironment around dispersed graphene sheets in surfactant solutions, and created a nylon 6, 10 or nylon 6, 6 coating via interfacial polymerization. Technique lies at the intersection of emulsion and admicellar polymerization; a similar technique was originally developed to protect luminescent properties of carbon nanotubes in solution. These coated graphene dispersions are aggregation-resistant and may be reversibly redispersed in water even after freeze-drying. The coated graphene holds promise for a number of applications, including multifunctional graphene-polymer nanocomposites.     

Macro-to-micro porous special bioactive glass and ceftriaxone-sulbactam composite drug delivery system for treatment of chronic osteomyelitis: an investigation through in vitro and in vivo animal trial

A systematic and extensive approach incorporating in vitro and in vivo experimentation to treat chronic osteomyelitis in animal model were made using antibiotic loaded special bioactive glass porous scaffolds. After thorough characterization for porosity, distribution, surface charge, a novel drug composite were infiltrated by using vacuum infiltration and freeze-drying method which was subsequently analyzed by SEM-EDAX and studied for in vitro drug elution in PBS and SBF. Osteomyelitis in rabbit was induced by inoculation of Staphylococcus aureus and optimum drug-scaffold were checked for its efficacy over control and parenteral treated animals in terms of histopathology, radiology, in vivo drug concentration in bone and serum and implant-bone interface by SEM. It was optimized that 60P samples with 60-65% porosity (bimodal distribution of macro- to micropore) with average pore size ~60 μm and higher interconnectivity, moderately high antibiotic adsorption efficiency (~49%) was ideal. Results after 42 days showed antibiotic released higher than MIC against S. aureus compared to parenteral treatment (2 injections a day for 6 weeks). In vivo drug pharmacokinetics and SEM on bone-defect interface proved superiority of CFS loaded porous bioactive glass implants over parenteral group based on infection eradication and new bone formation.