Thermal Expansion,Elastic and Magnetic Properties of FeCoNiCu-Based High-Entropy Alloys Using First-Principle Theory

The effects of V, Cr, and Mn on the magnetic, elastic, and thermal properties of FeCoNiCu high-entropy alloy are studied by using the exact muffin-tin orbitals method in combination with the coherent potential approximation. The calculated lattice parameters and Curie temperatures in the face-centered-cubic structure are in line with the available experimental and theoretical data. A significant change in the magnetic behavior is revealed when adding equimolar V, Cr, and Mn to the host composition. The three independent single-crystal elastic constants are computed using a finite strain technique, and the polycrystalline elasticity parameters including shear modulus, Young’s modulus, Pugh ratio, Poisson’s ratio, and elastic anisotropy are derived and discussed. The effects of temperature on the structural parameters are determined by making use of the Debye–Grüneisen model. It is found that FeCoNiCuCr possesses a slightly larger thermal expansion coefficient than do the other alloys considered here.     

Precursor-Derived Si-B-C-N Ceramics: Oxidation Kinetics

The oxidation behavior of three precursor-derived ceramics—Si_4.46BC_7.32N_4.40 (AMF2p), Si_2.72BC_4.51N_2.69 (AMF3p), and Si_3.08BC_4.39N_2.28 (T2/1p)—was investigated at 1300° and 1500°C. Scale growth at 1500°C in air can be approximated by a parabolic rate law with rate constants of 0.0599 and 0.0593 μm²/h for AMF3p and T2/1p, respectively. The third material does not oxidize according to a parabolic rate law, but has a similar scale thickness after 100 h. The results show that at least within the experimental times these ceramics develop extremely thin scales, thinner than pure SiC or Si₃N₄.     

Behaviour of quantity surveyors as organizational citizens

Understanding the individual's collectivistic orientations toward group goals and task activities is critical for developing cooperative and productive teams. The complex environment of modern construction, where the emphasis shifts from individually oriented to team‐based work, has led to many challenges. There are important issues of cooperative behaviours in a world of cultural pluralism in which interpersonal cooperation is juxtaposed with organizational citizenship behaviour. Behaviours of construction project participants are important manifestations of culture that are dependent upon norms, values and beliefs. Certain organizational cultures support individualistic behaviours while others emphasize the benefits to the collective whole. Collectivistic orientation is examined as the cultural dimension of individualism‐collectivism (IC) and found to be related to organizational citizenship behaviour (OCB) where the correlations of IC and most OCB variables are significant for quantity surveyors in Hong Kong. Generally, the (more) individualistic persons are less likely to exhibit organizational citizenship behaviours.     

Weathering of High-Density Polyethylene-Wood Plastic Composites

Due to the widespread use of wood-plastic composites (WPCs), high-density polyethylene-wood flour composites (HDPE/WF) were studied in order to determine their stability in different application conditions. UV degradation and periodic absorption/desorption of moisture cause damaging changes to material during WPCs’ exterior application, so it is necessary to ensure WPCs’ durability against atmospheric influences. Samples were characterized by FTIR spectroscopy and scanning electron microscopy (SEM) in order to study the degradation after simulated weathering. The degree of water absorption was also determined. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were used for the determination of composites’ thermal properties. Results show that the stability of the HDPE/WF composites to UV treatment highly depends on stabilizer content and its dispersion in the polymer matrix. Incompatibility of HDPE and wood particles is a major problem that should be solved to achieve good durability and satisfying properties in use.     

Drying Conditions and Processability of Dried Rapeseed

The possibility of using the oil-point and compression tests for evaluation of dried rapeseeds processability was examined. Seeds of initial moisture 10, 14, 18 and 22% (w/w) were dried at 60, 80, 100 and 120°C to a final moisture of 6·5% (w/w). The values of pressure ( P ₀ ), work ( L ₀ ) and strain (ε₀) determined by the oil-point test, and pressure at strain ε=0·45 mm mm⁻¹ ( P_ε ) and degree of elasticity ( D ) determined by the compression test for bulk dried seeds differed markedly from those found for non-dried seeds. The P ₀ , L ₀ and P_ε values were strongly correlated with the initial moisture of rapeseeds and drying temperature. All the strain values (ε₀) were lower than those for non-dried seeds, and their changes depended solely on the initial moisture of seeds. Changes in the degree of elasticity were irregular and did not reach the value characteristic for overdried seeds, ie 100%. High correlation of the agglomeration test data (Δ_1–3 values) with those of the P ₀ , L ₀ and P_ε made it possible to develop appropriate equations that proved the usefulness of the variables for determining the dried rapeseed processability.     

Phase development and pore stability of yttria- and ytterbia-stabilized zirconia aerogels

High-porosity yttria- and ytterbia-stabilized zirconia aerogels offer the potential of extremely low thermal conductivity materials for high-temperature applications. Yttria- and ytterbia-doped zirconia aerogels were synthesized using a sol-gel approach over the dopant range of 0-20 atomic percent. Surface area, pore volume, and morphology of the as-dried aerogels and materials thermally exposed for short periods of time to temperatures up to 1200°C were characterized by nitrogen physisorption, scanning and transmission electron microscopy, and X-ray diffraction. The aerogels as supercritically dried all were X-ray amorphous. At a 5% dopant level, a tetragonal structure with a smaller monoclinic phase developed on thermal exposure. Mixed tetragonal and cubic phases or predominantly cubic materials were observed at higher dopant levels, depending on the dopant level, temperature and exposure time. The formation of crystalline phases was accompanied by loss of surface area and pore volume, although some mesoporous structure was maintained on short-term exposure to 1000°C. Incorporation of the smaller Yb atom into the lattice structure resulted in smaller lattice dimensions on crystallization than was seen with Y doping and favored a more highly equiaxed structure. Aerogels synthesized with 15% Y maintained the smallest particle size without evidence of sintering at 1100°C. Largest shrinkage and loss of pore volume occurred on crystallization from the amorphous phase, with further loss of pores at temperatures above 1000°C attributable to changes in lattice parameters.     

Durability of YSZ coated Ti2AlC in 1300°C high velocity burner rig tests

A thermal barrier coating (TBC) system survived 500 hours in aggressive, 1300°C burner rig testing. The yttria-stabilized zirconia (7YSZ) TBC was plasma sprayed on an oxidation-resistant Ti₂AlC-type MAX phase and tested in a jet fuel burner at 100 m/s, using 5 hours cycles. No coating spallation or surface recession was observed; Al₂O₃-scale growth produced a slight 2.4 mg/cm² mass gain. The coating surface exhibited craze-cracked colonies of [111]_flourite textured columns, with no visible moisture attack. The 20 μm alumina scale remained intact under the YSZ face, about twice that producing failure for TBC/superalloy systems. TiO₂ nodules, initially formed on the uncoated backside, were removed, and Al₂O₃ was etched through volatile hydroxides formed in water vapor (~10%). Overall, the test indicated exceptional stability of the YSZ/Al₂O₃/Ti₂AlC system under turbine conditions due in large part to close thermal expansion matching.     

Determination of viability of Aeromonas hydrophila in increasing concentrations of sodium chloride at different temperatures by flow cytometry and plate count technique

Aeromonads in waters and foods can represent a risk to human health. Factors such as sodium chloride concentration and temperature can affect growth and viability of several food and water-borne pathogens. The behaviour of an Aeromonas hydrophila strain in the presence of 1.7%, 3.4% and 6% NaCl concentrations at 24 degrees C and 4 degrees C was studied over a 188 day period. Viability and membrane potential were assessed by flow cytometry; growth was evaluated by plate count technique. Flow cytometry evidenced that A. hydrophila retained viability over the period although varying according to temperature and salt concentrations. Colony Forming Units were generally lower in number than viable cells especially in the presence of 6% NaCl, indicating the occurrence of stressed cells which maintain metabolic activity yet are not able to grow on agar plates. In conclusion, A. hydrophila showed a long-term halotolerance even at elevated (6%) NaCl concentrations and a lesser sensitivity to salt at low temperature; therefore, low temperature and salt, which are two important factors limiting bacterial growth, do not assure safety in the case of high initial contamination. Finally, cytometry appears a valid tool for the rapid detection of the viability of pathogenic bacteria in food and environmental matrices to control and prevent health risks.