Role of Growth Stresses on the Structure of Oxide Scales on Nickel at 800 and 900°C

The development and relief of intrinsic growth stresses in oxide scales on nickel of different purity have been investigated by combining the deflection test in monofacial oxidation (DTMO) with acoustic-emission analysis (AE). Parallel metallographic analysis gave information about the development of the physical- defect structure and all other structural features. The investigations were performed for 100 hr at 800 as well as 900°C in air. The assumption of elastic behavior led to the best correlation between models, literature data, and results of the present investigations. Microcracks are responsible for the relief of growth stress and inward oxygen penetration leads to the typical NiO duplex scale. The growth of the microcracks is initiated at large pore populations at the oxide–metal interface that most probably form due to outward cation-diffusion and vacancy condensation. The pore formation is increased by the presence of impurities. An equilibrium of microcracking and crack healing is finally reached, leading to a continuous growth of the inner and outer NiO layers of the duplex scale. The scale growth stresses are mainly compressive and can reach maximum values of –560 MPa at 900°C. An estimation of the fracture toughness of the oxide–metal interface assuming a wavy interface led to a K_Ic value of about 2 MNm^-3/2 at 900°C     

TEM investigations of the early stages of TiAl oxidation

The early stages of TiAl oxidation at 900°C and 1000°C in air have been investigated by transmission electron microscopy (TEM). The investigations revealed that at the beginning of oxidation, i.e., after 4 min, TiO₂ and Al₂O₃ grow in a preferential orientation on the -TiAl substrate. After 4 h of oxidation an oxide scale structure can already be found similar to that known from long-term oxidation. In addition, besides -Al₂O₃, the formation of a second aluminum oxide phase and of titanium nitrides is observed. The processes at the metal-oxide interface of oxidation in the early stages, consisting of a repeated cycle of Al₂O₃ formation, Al₂O₃ dissolution, outward migration of Al through the scale, and reprecipitation of Al₂O₃ in the outer scale, are described by a model. The four stages observed in the kinetics of TiAl oxidation are explained on the basis of the results obtained and the structure of the oxide scale.     

Structure of the Fusarium oxysporum endoglucanase I with a nonhydrolyzable substrate analogue: substrate distortion gives rise to the preferred axial orientation for the leaving group

Endoglucanase I (EG I) is a cellulase, from glycosyl hydrolase family 7, which cleaves the beta-1,4 linkages of cellulose with overall retention of configuration. The structure of the EG I from Fusarium oxysproum, complexed to a nonhydrolyzable thiooligosaccharide substrate analogue, has been determined by X-ray crystallography at a resolution of 2.7 A utilizing the 4-fold noncrystallographic symmetry present in the asymmetric unit. The electron density map clearly reveals the presence of three glucosyl units of the inhibitor, consistent with the known number of sugar-binding subsites, located at the active site of the enzyme in the -2, -1, and +1 subsites, i.e., actually spanning the point of enzymatic cleavage. The pyranose ring at the point of potential enzymatic cleavage is clearly distorted from the standard 4C1 chair as was originally suggested for beta-retaining enzymes by Phillips [Ford, L.O., Johnson, L.N., Machin, P. A., Phillips, D.C., & Tijan, T. (1974) J. Mol. Biol, 88, 349-371]. The distortion observed goes beyond the "sofa" conformation observed in previous studies and results in a conformation whose salient feature is the resulting quasi-axial orientation for the glycosidic bond and leaving group, as predicted by stereoelectronic theory. An almost identical conformation has recently been observed in a complex of chitobiase with its unhydrolyzed substrate [Tews, I., Perrakis, A., Oppenheim, A., Dauter, Z., Wilson, K. S., & Vorgias, C. E. (1996) Nat. Struct. Biol. 3, 638-648]. The striking similarity between these two complexes extends beyond the almost identical pyranose ring distortion. The overlap of the two respective sugars places the enzymatic nucleophile of endoglucanase I in coincidence with the C2 acetamido oxygen of N-acetylglucosamine in the catalytic site of the chitobiase, substantiating the involvement of this group in the catalytic mechanism of chitobiase and related chitinolytic enzymes. The endoglucanase I complex with the thiosaccharide substrate analogue clearly illustrates the potential of nonhydrolyzable sulfur-linked oligosaccharides in the elucidation of substrate binding and catalysis by glycosyl hydrolases.     

Image Steganography Using Remainder Replacement,Adaptive QVD and QVC

Wireless Personal Communications - This research article reports a steganography method based on adaptive quotient value differencing (AQVD), quotient value correlation (QVC), and remainder...     

Design and Qualification of Pr–Fe–Cu–B Alloys for the Additive Manufacturing of Permanent Magnets

The direct use of an advanced binder-free additive manufacturing technique, namely laser powder bed fusion (L-PBF), does not easily allow obtaining variously shaped, fully dense Nd–Fe–B magnets with high coercivity. The process inherently leads to the re-melting of the powder and appearance/disappearance of undesired/desired microstructural features responsible for low and large coercivity. In this work, the development of a useful microstructure responsible for high coercivity in Pr₂₁Fe_73.5Cu₂B_3.5 and Nd₂₁Fe_73.5Cu₂B_3.5 alloys and a possible way to produce fully dense permanent magnets via additive manufacturing processes is demonstrated using: (i) suction casting technique, which provides a high cooling rate and thus similar microstructures as in L-PBF but requires only very small amounts of powder; (ii) conventional L-PBF processing using kg of powder, and (iii) a subsequent annealing treatment that is similar to a conventional sintering treatment. The subsequent heat treatment is necessary to develop high coercivity by forming a novel microstructure: hard magnetic (Nd,Pr)₂Fe₁₄B grains embedded in a matrix of intermetallic (Nd,Pr)₆Fe₁₃Cu phase. Furthermore, it is demonstrated that Pr₂₁Fe_73.5Cu₂B_3.5 exhibits a higher coercivity than Nd₂₁Fe_73.5Cu₂B_3.5 because of a finer and more homogeneous grain size distribution of the Pr₂Fe₁₄B phase. The final L-PBF printed Pr₂₁Fe_73.5Cu₂B_3.5 samples provide a coercivity of 0.75 T.     

Lithium Extraction by Emerging Metal–Organic Framework-Based Membranes

Lithium is mainly extracted from brine and ores; however, current lithium mining methods require large amounts of chemicals, discharge many wastes, and can have serious environmental repercussions. Metal–organic framework (MOF)-based membranes have shown great potential in lithium extraction due to their uniform pore sizes, high porosities, and rich host–guest chemistry compared to other materials. In this review, the processes and disadvantages of current lithium extraction technologies are introduced. The structure features and corresponding design strategy of MOFs suitable for Li⁺ ion separations are presented. Following, recent advances of polycrystalline MOF membranes, mixed matrix membranes, and MOF channel membranes for lithium-ion separation are discussed in detail. Finally, opportunities for future developments and challenges in this emerging research field are presented.     

Newcomers’ Barriers. . . Is That All? An Analysis of Mentors’ and Newcomers’ Barriers in OSS Projects

Newcomers’ seamless onboarding is important for open collaboration communities, particularly those that leverage outsiders’ contributions to remain sustainable. Nevertheless, previous work shows that OSS newcomers often face several barriers to contribute, which lead them to lose motivation and even give up on contributing. A well-known way to help newcomers overcome initial contribution barriers is mentoring. This strategy has proven effective in offline and online communities, and to some extent has been employed in OSS projects. Studying mentors’ perspectives on the barriers that newcomers face play a vital role in improving onboarding processes; yet, OSS mentors face their own barriers, which hinder the effectiveness of the strategy. Since little is known about the barriers mentors face, in this paper, we investigate the barriers that affect mentors and their newcomer mentees. We interviewed mentors from OSS projects and qualitatively analyzed their answers. We found 44 barriers: 19 that affect mentors; and 34 that affect newcomers (9 affect both newcomers and mentors). Interestingly, most of the barriers we identified (66%) have a social nature. Additionally, we identified 10 strategies that mentors indicated to potentially alleviate some of the barriers. Since gender-related challenges emerged in our analysis, we conducted nine follow-up structured interviews to further explore this perspective. The contributions of this paper include: identifying the barriers mentors face; bringing the unique perspective of mentors on barriers faced by newcomers; unveiling strategies that can be used by mentors to support newcomers; and investigating gender-specific challenges in OSS mentorship. Mentors, newcomers, online communities, and educators can leverage this knowledge to foster new contributors to OSS projects.     

Distinct and combined effects of disciplinary composition and methodological support on problem solving in groups

Several reasons for the use of multidisciplinary teams composed of individuals with natural science and engineering background in problem‐solving processes exist. The most important are the integration of science‐based technologies into products and processes, and benefits for the problem‐solving process thanks to new knowledge and new perspectives on problems. In this study we analyse the implications of interdisciplinary (science – engineering) group problem solving from a managerial as well as from a cognitive perspective. We then report on an experiment investigating the impact of problem‐relevant disciplinary group composition and methodological support on the problem‐solving process and its outcome. The findings of the experiment have managerial, theoretical, and pedagogical implications related to early phases of New Product/Process Design processes in high‐technology and scientific knowledge‐related domains.     

Quantitative analysis of temperature effect on SOI piezoresistive pressure sensors

Microsystem Technologies - Quantitative analysis of the temperature effect on piezoresistive pressure sensor response for operation at 200 bar, 200 °C was carried out through...