Inter-observer variation in masked and unmasked images for quality evaluation of clinical radiographs

PURPOSE: To investigate the influence of masking on the inter-observer variation in image quality evaluation of clinical radiographs of chest and lumbar spine. BACKGROUND: Inter-observer variation is a big problem in image quality evaluation since this variation is often much bigger than the variation in image quality between, for example, two radiographic systems. In this study, we have evaluated the effect of masking on the inter-observer variation. The idea of the masking was to force every observer to view exactly the same part of the image and to avoid the effect of the overall 'first impression' of the image. A discussion with a group of European expert radiologists before the study indicated that masking might be a good way to reduce the inter-observer variation. METHODS: Five chest and five lumbar spine radiographs were collected together with detailed information regarding exposure conditions. The radiographs were digitised with a high-performance scanner and five different manipulations were performed, simulating five different exposure conditions. The contrast, noise and spatial resolution were manipulated by this method. The images were printed onto the film and the individual masks were produced for each film, showing only the parts of the images that were necessary for the image quality evaluation. The quality of the images was evaluated on ordinary viewing boxes by a large group of experienced radiologists. The images were examined with and without the masks with a set of image criteria (if fulfilled, 1 point; and not fulfilled, 0 point), and the mean score was calculated for each simulated exposure condition. RESULTS: The results of this study indicate that-contrary to what was supposed-the inter-observer variation increased when the images were masked. In some cases, especially for chest, this increase was statistically significant. CONCLUSIONS: Based on the results of this study, image masking in studies of fulfilment of image criteria cannot be recommended.     

Structural elucidation and analysis of thermal degradation products of the Fusarium mycotoxin nivalenol

The major class of mycotoxins produced by Fusarium moulds are trichothecenes, a large group of sesquiterpenes sharing the same basic chemical structure, a 12,13-epoxytrichothec-9-ene ring system. Their toxic effects range from causing diarrhoea, vomiting and gastro-intestinal inflammation to noncompetitive inhibition of the biosynthesis of proteins in eukaryotic cells. Trichothecenes in general are relatively stable compounds, their degradation is observed only at high temperatures and prolonged heating time. In order to investigate the stability of the trichothecene nivalenol (NIV) under food processing conditions such as cooking or baking, we performed model heating experiments and screened the residue for degradation products using gas chromatography-mass spectrometry (GC-MS). Heating of nivalenol, especially under mild alkaline conditions, gave a mixture of four compounds (norNIV A, norNIV B, norNIV C, and NIV lactone), which where isolated and identified by nuclear magnetic resonance (NMR) and MS experiments. Although their formation was also demonstrated in heating experiments with spiked flour samples, only norNIV B was detectable in a screening of several commercially available samples, possibly due to the very low contamination with nivalenol. Furthermore, cell culture experiments using immortalized human kidney epithelial (IHKE) cells showed that the four compounds are less cytotoxic (formazan dye cytotoxicity assay) compared to nivalenol. Whereas nivalenol revealed an EC50 at 0.9 micromol, all other compounds did not show any significant effect up to 100 micromol.     

Pseudo-Starvation Driven Energy Expenditure Negatively Affects Ovarian Follicle Development

In the present investigation, we examined whether a change in whole body energy fluxes could affect ovarian follicular development, employing mice ectopically expressing uncoupling protein 1 in skeletal muscle (UCP1-TG). Female UCP1-TG and wild-type (WT) mice were dissected at the age of 12 weeks. Energy intake and expenditure, activity, body weight and length, and body composition were measured. Plasma insulin, glucose, leptin, plasma fibroblast growth factor 21 (FGF21) and plasma insulin-like growth factor 1 (IGF1) levels were analyzed and ovarian follicle and corpus luteum numbers were counted. IGF1 signaling was analyzed by immunohistochemical staining for the activation of insulin receptor substrate 1/2 (IRS1/2) and AKT. UCP1-TG female mice had increased energy expenditure, reduced body size, maintained adiposity, and decreased IGF1 concentrations compared to their WT littermates, while preantral and antral follicle numbers were reduced by 40% and 60%, respectively. Corpora lutea were absent in 40% of the ovaries of UCP1-TG mice. Phospho-IRS1, phospho-AKT -Ser473 and -Thr308 immunostaining was present in the granulosa cells of antral follicles in WT ovaries, but faint to absent in the antral follicles of UCP1-TG mice. In conclusion, the reduction in circulating IGF1 levels due to the ectopic expression of UCP1 is associated with reduced immunostaining of the IRS1-PI3/AKT pathway, which may negatively affect ovarian follicle development and ovulation.     

A comprehensive approach to the analysis of contrast enhanced cardiac MR images

Current magnetic resonance imaging (MRI) technology allows the determination of patient-individual coronary tree structure, detection of infarctions, and assessment of myocardial perfusion. Joint inspection of these three aspects yields valuable information for therapy planning, e.g., through classification of myocardium into healthy tissue, regions showing a reversible hypoperfusion, and infarction with additional information on the corresponding supplying artery. Standard imaging protocols normally provide image data with different orientations, resolutions and coverages for each of the three aspects, which makes a direct comparison of analysis results difficult. The purpose of this work is to develop methods for the alignment and combined analysis of these images. The proposed approach is applied to 21 datasets of healthy and diseased patients from the clinical routine. The evaluation shows that, despite limitations due to typical MRI artifacts, combined inspection is feasible and can yield clinically useful information.     

Risk factors associated with colostrum quality in Norwegian dairy cows

The objectives of the present study were to evaluate colostrum quality in Norwegian dairy cows based on IgG content, and to identify associations between possible risk factors and low colostral IgG. A longitudinal cross-sectional survey on calf health in Norway was performed between June 2004 and December 2006. The participating dairy herds were randomly selected among herds registered in the Norwegian Dairy Herd Recording System as having at least 15 cow years. The participating farmers were requested to sample 10 mL of colostrum from the first milking after calving from 12 cows that had calved during the defined project period of 365 d. Colostrum samples from 1,250 cows from 119 herds were collected. The material consisted of 451, 337, 213, and 249 samples collected from cows in their first, second, third, and fourth parity or more, respectively. Analysis was performed on IgG content by using single radial immunodiffusion. Mixed models with herd as a cluster were fit by using grams of IgG per liter of colostrum as the dependent variable for the statistical analyses. The IgG content in the colostrum sampled ranged from 4 to 235 g/L, with a median of 45.0 g of IgG/L, with the 10th, 25th, 75th, and 90th percentiles being 23.1, 31.4, 63.6, and 91.6 g of IgG/L, respectively. Altogether, 57.8% of the samples contained less than the desired 50 g of IgG/L of colostrum. Cows in their fourth parity or more were found to have significantly higher levels of IgG per liter of colostrum than cows in their first or second parity. Colostrum from cows in their second parity had the lowest level of IgG. Cows calving during the winter months (December, January, and February) produced colostrum with a significantly lower IgG content compared with cows calving in any other season of the year. Somatic cell count, measured after calving, was significantly higher in cows producing colostrum of inferior quality compared with those producing high-quality colostrum. Of the total variation in colostrum quality, 13.7% could be explained by cluster effects within herd. The variation in IgG content in colostrum produced by Norwegian dairy cows indicates a need for improved colostrum quality control and subsequent adjustment of the colostrum feeding regimen to ensure a protective immunological status for newborn calves.     

Pine heartwood and glass surfaces: easy method to test the fate of?bacterial contamination

The survival of two bacteria, Escherichia coli and Listeria monocytogenes was observed on pine heartwood and glass surfaces by using a simple test method. The development of the number of bacterial cells was evaluated by titration after vortexing the samples in BHI broth and culturing the resulting broth on agar plates. The bacterial count decreased clearly faster on pine heartwood than on glass surfaces. This result was confirmed by studying the wooden samples also one day after to exclude possible adherence of the bacterial cells on the porous surface. This study confirms the results of several other studies that suggest wood to have antibacterial properties.     

From Geometry to Activity: A Quantitative Analysis of WO3/Si Micropillar Arrays for Photoelectrochemical Water Splitting

The photoelectrochemical (PEC) activity of microstructured electrodes remains low despite the highly enlarged surface area and enhanced light harvesting. To obtain a deeper understanding of the effect of 3D geometry on the PEC performance, well‐defined WO₃/n‐Si and WO₃/pn‐Si micropillar arrays are fabricated and subjected to a quantitative analysis of the relationship between the geometry of the micropillars (length, pitch) and their PEC activity. For WO₃/n‐Si micropillars, it is found that the photocurrent increases for WO₃/n‐Si pillars, but not in proportion to the increase in surface area that results from increased pillar length or reduced pillar pitch. Optical simulations show that a reduced pillar pitch results in areas of low light intensity due to a shadowing effect. For WO₃/pn‐Si micropillar photoelectrodes, the p–n junction enhances the photocurrent density up to a factor of 4 at low applied bias potential (0.8 V vs RHE) compared to the WO₃/n‐Si. However, the enhancement in photocurrent density increases first and then decreases with reduced pillar pitch, which scales with the photovoltage generated by the p–n junction. This is related to an increased dead layer of the p–n junction Si surface, which results in a decreased photovoltage even though the total surface area increases.     

A Versatile Route to Assemble Semiconductor Nanoparticles into Functional Aerogels by Means of Trivalent Cations

3D nanoparticle assemblies offer a unique platform to enhance and extend the functionality and optical/electrical properties of individual nanoparticles. Especially, a self‐supported, voluminous, and porous macroscopic material built up from interconnected semiconductor nanoparticles provides new possibilities in the field of sensing, optoelectronics, and photovoltaics. Herein, a method is demonstrated for assembling semiconductor nanoparticle systems containing building blocks possessing different composition, size, shape, and surface ligands. The method is based on the controlled destabilization of the particles triggered by trivalent cations (Y³⁺, Yb³⁺, and Al³⁺). The effect of the cations is investigated via X‐ray photoelectron spectroscopy. The macroscopic, self‐supported aerogels consist of the hyperbranched network of interconnected CdSe/CdS dot‐in‐rods, or CdSe/CdS as well as CdSe/CdTe core‐crown nanoplatelets is used to demonstrate the versatility of the procedure. The non‐oxidative assembly method takes place at room temperature without thermal activation in several hours and preserves the shape and the fluorescence of the building blocks. The assembled nanoparticle network provides longer exciton lifetimes with retained photoluminescence quantum yields, that make these nanostructured materials a perfect platform for novel multifunctional 3D networks in sensing. Various sets of photoelectrochemical measurements on the interconnected semiconductor nanorod structures also reveal the enhanced charge carrier separation.     

Patterning of Nanoparticle‐Based Aerogels and Xerogels by Inkjet Printing

Nanoparticle‐based voluminous 3D networks with low densities are a unique class of materials and are commonly known as aerogels. Due to the high surface‐to‐volume ratio, aerogels and xerogels might be suitable materials for applications in different fields, e.g. photocatalysis, catalysis, or sensing. One major difficulty in the handling of nanoparticle‐based aerogels and xerogels is the defined patterning of these structures on different substrates and surfaces. The automated manufacturing of nanoparticle‐based aerogel‐ or xerogel‐coated electrodes can easily be realized via inkjet printing. The main focus of this work is the implementation of the standard nanoparticle‐based gelation process in a commercial inkjet printing system. By simultaneously printing semiconductor nanoparticles and a destabilization agent, a 3D network on a conducting and transparent surface is obtained. First spectro‐electrochemical measurements are recorded to investigate the charge–carrier mobility within these 3D semiconductor‐based xerogel networks.