A Telemedicine Platform for Disaster Management and Emergency Care

Wireless Personal Communications - Disaster or emergency can create unusual circumstances. And usually they are extremely hard to stop. However, an intelligent approach or strategy can limit the...     

Investigating the turbulent flow characteristics in an open channel with staggered vegetation patches

In the present study, flow around circular and staggered vegetation patches was investigated numerically. For turbulence modelling, the Reynolds‐averaged Navier–Stokes technique and Reynolds stress model were adopted. The numerical model was validated with the experimental data using varying vegetation density and flow velocities. The simulated results of mean stream‐wise velocities were in close agreement with the experimental results. The results show that the mean stream‐wise velocity in the downstream regions of vegetation patches were reduced, whereas the velocity in the free stream regions were increased. The influence of neighbouring and staggered vegetation patches on the flow was observed. The vegetation patches with larger nondimensional flow blockage (aD = 2.3, where a is the frontal area per volume of patches, and D is the diameter of vegetation patches) offered more turbulence when compared to the patches with a smaller flow blockage (aD = 1.2). Larger turbulence in the form of kinetic energy and turbulent intensity was recorded within the vegetation as well as the regions directly behind the patches. Negative Reynolds stresses were observed at the top of submerged vegetation. The turbulence characteristics peaked at the top of vegetation, that is, z/h = 1.0 (where z is the flow depth, and h is the vegetation height), which may be migrated vertically as the frontal area of the vegetation patch is increased. This high frontal area also increased stream‐wise velocity above the vegetation, leading to an increased variation in turbulence around the vegetation canopy.     

Tailoring of structural and magnetic properties by substitution of copper in cobalt chromium ferrites

The simple and cost-effective powder metallurgy method has been employed to prepare a series of copper substituted cobalt chromium ferrites Cu_xCo_1-xCr_0.5Fe₂O₄ (x?=?0, 0.2, 0.4, 0.6, 0.8, 1.0). The calcination of the samples has been carried out at 1100?°C for 24?h. X-Ray Diffractometer (XRD) and Fourier transform infrared spectroscopy (FTIR) measurement proves the formation of cubic spinel ferrites. Vibrating Sample Magnetometer (VSM)) analysis revealed that the substitution of copper in the Co-Cr ferrites leads to reduce the magnetic moment that in turns decrease the saturation magnetization and coercivity. The Ultra violet visible spectroscopy (UV–VIS) showed that the band gap energy increases with copper substitution which is due to reduction in crystallite size. The results indicate that the replacement of copper with the cobalt-chromium ferries strongly influences the crystal structure, microstructure, magnetic parameters and band gap energy.     

Effect of irradiation by 140 Mev Ag ions on the optical and electrical properties of polypropylene/TiO2 composite

Changes in the optical, structural, dielectric properties and surface morphology of a polypropylene/TiO₂ composite due to swift heavy ion irradiation were studied by means of UV–visible spectroscopy, X-ray diffraction, impedance gain phase analyzer and atomic force microscopy. Samples were irradiated with 140 MeV Ag¹¹⁺ ions at fluences of 1 × 10¹¹ and 5 × 10¹² ions/cm². UV–visible absorption analysis reveals a decrease in optical direct band gap from 2.62 to 2.42 eV after a fluence of 5 × 10¹² ions/cm². X-ray diffractograms show an increase in crystallinity of the composite due to irradiation. The dielectric constants obey the Universal law given by ε α f ⁿ⁻¹, where n varies from 0.38 to 0.91. The dielectric constant and loss are observed to change significantly due to irradiation. Cole–cole diagrams have shown the frequency dependence of the complex impedance at different fluences. The average surface roughness of the composite decreases upon irradiation.     

Comparative pollen and foliar micromorphological studies using light microscopy and scanning electron microscopy of some selected species of Lamiaceae from Alpine Zone of Deosai Plateau,Western Himalayas

The study was conducted to highlight a detailed account of morphology of pollen chosen species of Lamiaceae through scanning electron microscopy, and the anatomical characteristics of leaf epidermis of seven species using simple light microscopy. In results, Anisomeles indica and Otostegia aucheri belong to subfamily Lamioideae because it has tricolpate pollen while the rest eight species belong to subfamily Nepetoideae (hexacolpate pollen). The exine sculpturing of pollen of studied species was found to be reticulate. In the family Lamiaceae, four kinds of stomata were found anomocytic, anisocytic, diacytic, and actinocytic, respectively. The cell wall patterns of epidermal cells were irregular or polygonal with straight or undulate walls. It was noted that the variety of the epidermal trichomes seems of taxonomically important for the identification of species of Lamiaceae. Both nonglandular and glandular trichomes were analyzed. The nonglandular trichomes were characterized with long, thin, and pointed apical unicellular cells. The nonglandular trichomes were A‐shaped in Thymus linearis. In Perovskia abrotanoides, stellate glandular trichomes were observed whereas in A. indica and Mentha royleana both glandular and nonglandular trichomes were found. In A. indica, the nonglandular trichomes were sessile and peltate in M. royleana. For the first time in this study, pollen and foliar micromorphological features of selected species of this area are carried out. These taxonomic characters were found to be important in discrimination of species from each other. In future, the detailed study with comprehensive morphology coupled with other important characters is required for delimitation of taxa at various levels.     

Design of Simulation System for LTE-U Using 5 GHz Band in MATLAB

Wireless Personal Communications - Unused spectrum is being a limited commodity for the telecom industry. However, up to 500 MHz of unlicensed spectrum in 5 GHz band is in use for...     

Harnessing the Extracellular Electron Transfer Capability of Geobacter sulfurreducens for Ambient Synthesis of Stable Bifunctional Single-Atom Electrocatalyst for Water Splitting

Single-atom metal (SA-M) catalysts with high dispersion of active metal sites allow maximum atomic utilization. Conventional synthesis of SA-M catalysts involves high-temperature treatments, leading to low yield with a random distribution of atoms. Herein, a nature-based facile method to synthesize SA-M catalysts (M = Fe, Ir, Pt, Ru, Cu, or Pd) in a single step at ambient temperature, using the extracellular electron transfer capability of Geobacter sulfurreducens (GS), is presented. Interestingly, the SA-M is coordinated to three nitrogen atoms adopting an MN₃ on the surface of GS. Dry samples of SA-Ir@GS without further heat treatment show exceptionally high activity for oxygen evolution reaction when compared to benchmark IrO₂ catalyst and comparable hydrogen evolution reaction activity to commercial 10 wt% Pt/C. The SA-Ir@GS exhibits the best water-splitting performance compared to other SA-M@GS, showing a low applied potential of 1.65 V to achieve 10 mA cm⁻² in 1.0 M KOH with cycling over 5 h. The density functional calculations reveal that the large adsorption energy of H₂O and moderate adsorption energies of reactants and reaction intermediates for SA-Ir@GS favorably improve its activity. This synthesis method at room temperature provides a versatile platform for the preparation of SA-M catalysts for various applications by merely altering the metal precursors.     

G-Protein-Coupled Lysophosphatidic Acid Receptors and Their Regulation of AKT Signaling

A hallmark of G-protein-coupled receptors (GPCRs) is their ability to recognize and respond to chemically diverse ligands. Lysophospholipids constitute a relatively recent addition to these ligands and carry out their biological functions by activating G-proteins coupled to a large family of cell-surface receptors. This review aims to highlight salient features of cell signaling by one class of these receptors, known as lysophosphatidic acid (LPA) receptors, in the context of phosphatidylinositol 3-kinase (PI3K)–AKT pathway activation. LPA moieties efficiently activate AKT phosphorylation and activation in a multitude of cell types. The interplay between LPA, its receptors, the associated Gαi/o subunits, PI3K and AKT contributes to the regulation of cell survival, migration, proliferation and confers chemotherapy-resistance in certain cancers. However, detailed information on the regulation of PI3K–AKT signals induced by LPA receptors is missing from the literature. Here, some urgent issues for investigation are highlighted.     

Effect of deposition temperature on structural, surface, optical and magnetic properties of pulsed laser deposited Al-doped CdO thin films

The objective of this work is to study the influence of deposition temperature on structural, surface, optical and magnetic properties of the Al doped CdO thin films prepared by pulsed laser deposition (PLD) technique. KrF excimer laser (λ = 248 nm, τ_l = 20 ns, ν = 10 Hz, ?_l = 2.5 J/cm²) was employed for the deposition of thin films. It is observed by XRD results that films grown at room temperature and 100 °C show preferential growth along (1 1 1) and (2 0 0) directions while high temperatures (200-400 °C) lead to preferential growth along the (2 0 0) direction only. The optical constants (n, k, α, and optical band gap energy) of films measured by spectroscopic ellipsometry show strong dependence upon deposition temperature. M-H loop of films, measured by vibrating sample magnetometer, deposited at 25 °C and 100 °C show paramagnetic nature while films deposited at temperatures (200-400 °C) exhibit ferromagnetic character. Scanning electron micrographs show degraded elongated grains at lower deposition temperatures, while smooth and compact surface is observed for films deposited at higher deposition temperatures.     

Characterization of exopolysaccharide produced by Lactobacillus kefiranofaciens ZW3 isolated from Tibet kefir – Part II

ZW3 is a newly discovered exopolysaccharide (EPS) produced by Lactobacillus kefiranofaciens ZW3, isolated from Tibet kefir. Some of its properties have been characterized in our previous paper. Present research demonstrates some other important aspects of this EPS. The molecular weight obtained by gel permeation HPLC was 5.5 × 10⁴ Da. Solubility, water holding and oil binding capacity of ZW3 EPS were 14.2%, 496.0%, and 884.74% respectively. Scanning electron microscopy (SEM) of ZW3 EPS demonstrated a smooth surface with compact structures. A topographical examination of EPS by atomic force microscopy (AFM) revealed that ZW3 EPS is composed of almost uniform net of molecules. Rheological study indicated that common salt did not affect the viscous behavior of ZW3 EPS and acidic pH may enhance its viscosity. Exopolymer showed a melting point of 93.38 °C. A degradation temperature (Td) of 299.62 °C was observed from the TGA curve for the polysaccharide ZW3.