Zero Risk Does Not Exist: Lessons Learned from Microbial Risk Assessment Related to Use of Water and Safety of Fresh Produce

Risk assessments related to use of water and safety of fresh produce originate from both water and food microbiology studies. Although the set‐up and methodology of risk assessment in these 2 disciplines may differ, analysis of the current literature reveals some common outcomes. Most of these studies from the water perspective focus on enteric virus risks, largely because of their anticipated high concentrations in untreated wastewater and their resistance to common wastewater treatments. Risk assessment studies from the food perspective, instead, focus mainly on bacterial pathogens such as Salmonella and pathogenic Escherichia coli. Few site‐specific data points were available for most of these microbial risk assessments, meaning that many assumptions were necessary, which are repeated in many studies. Specific parameters lacking hard data included rates of pathogen transfer from irrigation water to crops, pathogen penetration, and survival in or on food crops. Data on these factors have been investigated over the last decade and this should improve the reliability of future microbial risk estimates. However, the sheer number of different foodstuffs and pathogens, combined with water sources and irrigation practices, means that developing risk models that can span the breadth of fresh produce safety will be a considerable challenge. The new approach using microbial risk assessment is objective and evidence‐based and leads to more flexibility and enables more tailored risk management practices and guidelines. Drawbacks are, however, capacity and knowledge to perform the microbial risk assessment and the need for data and preferably data of the specific region.     

Molecular characterization of Escherichia coli O157 contamination routes in a cattle slaughterhouse

In a cattle slaughterhouse, sampling was performed over a 1-week period to examine the prevalence and possible contamination routes of Escherichia coli O157. Each sampling day, swab samples were collected from the slaughterhouse environment before onset of slaughter, from the slaughterline, and from 20 successively slaughtered animals. Isolation of E. coli O157 consisted of a 6-hour enrichment followed by immunomagnetic separation and selective plating. From the 394 samples taken, 84 (21%) were positive for E. coli O157. Pulsed-field gel electrophoresis (PFGE) of collected isolates produced 26 different profiles, from which 5 PFGE profiles carried two or more Stx genes. The combination of PFGE profiles and Stx types resulted in 32 different E. coli O157 types. E. coli O157 was found in the slaughterhouse environment before the onset of slaughter. The first two sampling days, feces and carcasses were found negative. On the third sampling day, five fecal samples and four carcasses from animals negative in the feces were positive. Hide of the anal region and the shoulder were found positive every sampling day. The shoulder hide was more than twice as contaminated as the anal region hide. Typing of different isolates from a sample showed that frequently different E. coli O157 types were presented. On sampling days 1 and 2, types present in the environment and on the hides of the slaughtered animals differed. On the third sampling day, two dominant types were found in the environment (even before the onset of slaughter), as well as on the hides, feces, and carcasses. Although examined animals originated from different farms, one (two on day 3) dominant E. coli O157 type was present on their hides each sampling day. These data indicated that (i) the progress of contamination can differ from day to day within a slaughterhouse and (ii) contact between animals after the departure from the farm can have a large effect on the spread of E. coli O157 hide contamination.     

Influence of medium-chain triglycerides on lipid metabolism in the rat

Lipid metabolism was studied in rats fed diets containing corn oil, coconut oil, or medium-chain triglyceride (MCT), a glyceride mixture containing fatty acids of 8 and 10 carbons in length. The ingestion of MCT-supplemented, cholesterolfree diets depressed plasma and liver total lipids and cholesterol as compared with corn oil-supplemented diets. In rats fed cholesterol-containing diets, plasma cholesterol levels were not influenced by dietary MCT, but liver cholesterol levels were significantly lower than in animals fed corn oil. In vitro cholesterol synthesis from acetate-1-¹⁴C was lower in liver slices of rats that consumed MCT than in similar preparations from corn oil-fed rats. Studies of fatty acid carboxyl labeling from acetate-1-¹⁴C and the conversion of palmitate-1-¹⁴C to C₁₈ acids by liver slices showed that chain-lengthening activity is greater in the liver tissue of rats fed MCT than in the liver of animals fed corn oil. The hepatic fatty acid desaturation mechanisms, evaluated by measuring the conversion of stearate-2-¹⁴C to oleate, was also enhanced by feeding MCT. Adipose tissue of rats fed MCT converts acetate-1-¹⁴C to fatty acids at a much faster rate than does tissue from animals fed corn oil. Evidence is presented to show that the enhanced incorporation of acetate into fatty acids by the adipose tissue of rats fed MCT represents de novo synthesis of fatty acids and not chain-lengthening activity. Data are also presented on the fatty acid composition of plasma, liver, and adipose tissue lipids of rats fed the different fats under study.     

Model oxide-supported metal catalysts: energetics,particle thicknesses,chemisorption and catalytic properties

Many industrially important catalysts consist of late transition metal particles supported on the surfaces of oxide materials. Our studies of such systems using model catalysts consisting of metal films vapor deposited onto the surfaces of single-crystalline oxides are reviewed here. Systems studied include Cu on ZnO, Pt on ZnO, Au on TiO₂ and Cu, Ag and Pb on MgO. A unique adsorption microcalorimeter was developed to measure directly the energetic stability of the metal atoms on the oxide surfaces and the adhesion energy at the metal/oxide interface, which clarify the structural and chemisorption properties of the ultrathin metal particles. The structure of the oxide surface and the metal particles was elucidated by low-energy electron diffraction (LEED), low-energy ion scattering spectroscopy (ISS), angular-resolved X-ray photoelectron spectroscopy (XPS) and X-ray photoelectron diffraction (XPD). The electronic character of the metal particles was revealed by XPS, Auger electron spectroscopy (AES), band-bending and work function measurements. Sintering rates were measured by temperature-programmed ion scattering spectroscopy (TPISS). The chemisorption properties of these particles and their catalytic reactivity were monitored by mass spectroscopy and temperature-programmed desorption (TPD).     

Single-walled carbon nanotube/silicone rubber composites for compliant electrodes

Single-walled carbon nanotube (SWCNT)/silicone rubber composites that can be used in fabricating compliant electrodes are prepared by spraying a mixed solution of ionic-liquid-based SWCNT gel and silicone rubber onto an elastic substrate. Subsequently, the composites are exposed to nitric acid vapor. Scanning electron microscopy and atomic force microscopy images of the composites show that the SWCNTs are finely dispersed in the polymer matrix due to the addition of the ionic liquid. Doping of the SWCNTs by nitric acid can significantly lower the sheet resistance (R_s) of the composites; samples with 4 wt% of SWCNT content exhibit the lowest R_s value (50 Ω sq^?1). This sheet resistance corresponds to a conductivity value of 63 S cm^?1. In addition, the composites retain a high conductivity after several tensile strains are applied. Stretching the composite sample to 300% of the original length increased the R_s value to 320 Ω sq^?1 (19 S cm^?1). Even after 20th stretch/release/stretch cycle, the conductivity remains constant at a value of 18 S cm^?1. These results provide a scalable route for preparing highly stretchable and conductive SWCNT composites with relatively low SWCNT concentrations.     

Influence of montmorillonite layered silicate on plasticized poly(l-lactide) blown films

Plasticized poly(l-lactide) (PLA) montmorillonite layered silicate (MLS) nanocomposites were compounded and blown-film processed using a co-rotating twin screw extruder. PLA was mixed with 10 wt% acetyltriethyl citrate ester plasticizer and 5 wt% of an organically modified montmorillonite at various screw speeds. Wide-angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM) determined that the compounded pellets and the blown film PLA/MLS nanocomposites were intercalated. The effect of processing screw speeds on the barrier, thermal, mechanical, and biodegradation properties of the nanocomposites were analyzed and compared to the neat polymer. Nanocomposite films show a 48% improvement in oxygen barrier and a 50% improvement in water vapor barrier in comparison to the neat PLA. The thermogravimetric analysis (TGA) showed an overall 9 °C increase in the decomposition temperature for all of the nanocomposites. Differential scanning calorimetry (DSC) has determined that the glass transition, cold crystallization and melting point temperatures were not significantly influenced by the presence of MLS. Mechanical properties of the nanocomposites showed that the Young's modulus increased by 20% and the ultimate elongation of the nanocomposites were not sacrificed in comparison to the neat samples. Biodegradation rates in soil were slightly greater for the PLA/MLS nanocomposite than the pure PLA. However, none of the PLA pure and nanocomposites achieved significant biodegradation levels after 180 days.     

Removal of estrogenicity in Swedish municipal sewage treatment plants

The human estrogen receptor alpha-test, hosted in a yeast strain, was used to quantify estrogenicity in three-week composite samples of untreated and treated effluents from 20 Swedish municipal sewage treatment plants. The treatment plants were selected to represent different treatment processes regarding chemical precipitation and microbial procedures. The discharge from Swedish domestic sewage treatment plants contained estrogenic compounds corresponding to <0.1-15 ng estradiol equivalents/L. Low levels of estrogenic activity were also found in a river receiving municipal effluents, 3.5-35 km downstream the outlet from a sewage treatment works. The range of estrogenicity in untreated, raw sewage effluents was found to be 1-30 ng estradiol equivalents/L. Generally, wastewater treatment reduced the estrogenicity and extended biological treatment was most effective in its removal. Activated sludge treatment tended to be more effective than trickling filters, whereas chemical precipitation using iron or aluminium salts without biological treatment showed little effectivity. The study showed that treatment methods in current use are able to eliminate or largely reduce estrogenicity in domestic wastewater.     

基于各向异性Gibbs随机场与高斯混合模型的脑MR图像分割算法

为了克服高斯混合模型(GMM)的局限性,利用 Gibbs 理论和图像结构信息构造各向异性 Gibbs 随机场,并将其引入到 GMM 框架中,完善 GMM 的分类效果,使其在克服噪声影响的同时,还能够保持细长拓扑结构区域信息以及角点区域信息.实验结果证明,文中算法可以得到较好的分类结果.