Electroantennographic and behavioral responses of the sphinx moth Manduca sexta to host plant headspace volatiles

Coupled gas chromatography with electroantennographic detection (GC-EAD) using antennae of adult female Manduca sexta was employed to screen for olfactory stimulants present in headspace collections from four species of larval host plants belonging to two families: Solanaceae—Lycopersicon esculentum (tomato), Capiscum annuum (bell pepper), and Datura wrightii; and Martyniaceae—Proboscidea parviflora. Headspace volatiles were collected from undamaged foliage of potted, living plants. GC–EAD revealed 23 EAD-active compounds, of which 15 were identified by GC-mass spectrometry. Identified compounds included aliphatic, aromatic, and terpenoid compounds bearing a range of functional groups. Nine EAD-active compounds were common to all four host plant species: (Z)-3-hexenyl acetate, nonanal, decanal, phenylacetaldehyde, methyl salicylate, benzyl alcohol, geranyl acetone, (E)-nerolidol, and one unidentified compound. Behavioral responses of female moths to an eight-component synthetic blend of selected tomato headspace volatiles were tested in a laboratory wind tunnel. Females were attracted to the blend. A comparison of responses from antennae of males and females to bell pepper headspace volatiles revealed that males responded to the same suite of volatiles as females, except for (Z)-3-hexenyl benzoate. EAD responses of males also were lower for (Z)- and (E)-nerolidol and one unidentified compound. Electroantennogram EAG dose–response curves for the 15 identified EAD-active volatiles were recorded. At the higher test doses (10–100 g), female antennae yielded larger EAG responses to terpenoids and to aliphatic and aromatic esters. Male antennae did respond to the higher doses of (Z)-3-hexenyl benzoate, indicating that they can detect this compound. On the basis of ubiquity of the EAD-active volatiles identified to date in host plant headspace collections, we suggest that M. sexta uses a suite of volatiles to locate and identify appropriate host plants.     

The nature of polymer grafts and substrate shape on the surface degradation of poly(l‐lactide)

Surface grafting of functional polymers is an effective method to alter material properties and degradation behavior. Two different substrate shapes of poly(l ‐lactide) (PLLA), i.e., films and microparticles, were surface‐grafted with hydrophilic monomers, and their surface degradation was monitored. Surface grafting with a hydrophilic and acidic polymer graft [acrylic acid (AA)] induced large alterations in the surface morphology and topography of the films. In contrast, hydrophilic and neutral polymer grafts [acrylamide (AAm)] had no significant effect on the surface degradation behavior, while the PLLA reference and co‐monomeric (AA/AAm) polymer‐grafted samples exhibited intermediate surface degradation rates. The grafted PAA chains induced a local acidic environment on the surface of the substrates, which in turn catalyzed the surface degradation process. This effect was more pronounced in the films than in the microparticles. Thus, the nature of the grafted chains and substrate geometry were shown to affect the surface degradation behavior of PLLA substrates. © 2015 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42736.     

Induction of Oxidative Stress and Antioxidative Mechanisms in Arabidopsis thaliana after Uranium Exposure at pH 7.5

To evaluate the environmental impact of uranium (U) contamination, it is important to investigate the effects of U at ecologically relevant conditions. Since U speciation, and hence its toxicity, strongly depends on environmental pH, the present study aimed to investigate dose-dependent effects of U at pH 7.5. Arabidopsis thaliana plants (Mouse-ear Cress) were exposed for three days to different U concentrations at pH 7.5. In the roots, the increased capacities of ascorbate peroxidase and glutathione reductase indicate an important role for the ascorbate-glutathione cycle during U-induced stress. However, a significant decrease in the ascorbate redox state was observed after exposure to 75 and 100 µM U, indicating that those roots are severely stressed. In accordance with the roots, the ascorbate-glutathione cycle plays an important role in the antioxidative defence systems in A. thaliana leaves exposed to U at pH 7.5 as the ascorbate and glutathione biosynthesis were upregulated. In addition, small inductions of enzymes of the antioxidative defence system were observed at lower U concentrations to counteract the U-induced stress. However, at higher U concentrations it seems that the antioxidative defence system of the leaves collapses as reductions in enzyme activities and gene expression levels were observed.     

Total Long-Chain n-3 Fatty Acid Intake and Food Sources in the United States Compared to Recommended Intakes: NHANES 2003–2008

The American Heart Association recommends consuming fish (particularly oily fish) at least two times per week, which would provide ≈ 0.5 g/day of eicosapentaenoic acid (EPA) + docosahexaenoic acid (DHA) for cardiovascular disease risk reduction. Previous analyses indicate that this recommendation is not being met; however, few studies have assessed different ethnicities, subpopulations requiring additional n-3 fatty acid intake (i.e., children and pregnant and/or lactating women), or deciles of intake. Data from the National Health and Nutrition Examination Survey 2003–2008 was used to assess n-3 fatty acid intake from foods and supplements in the US population, according to age, sex, and ethnicity. A unique “EPA equivalents” factor, which accounts for potential conversion of shorter-chain n-3 fatty acids, was used to calculate total long-chain n-3 fatty acid intake. Data are reported for 24,621 individuals. More than 90% consumed less than the recommended 0.5 g/day from food sources (median = 0.11 g/day; mean = 0.17 g/day). Among the top 15% of n-3 fatty acid consumers, fish was the largest dietary contributor (71.2%). Intake was highest in men aged 20 years or more, and lowest in children and women who are or may become pregnant and/or are lactating. Among ethnicities, intake was lowest in Mexican-Americans. Only 6.2% of the total population reported n-3 fatty acid supplement use, and this did not alter median daily intake. Additional strategies are needed to increase awareness of health benefits (particularly among Mexican-Americans and women of childbearing age) and promote consumption of oily fish or alternative dietary sources to meet current recommendations.     

Novel Type II Fatty Acid Biosynthesis (FAS II) Inhibitors as Multistage Antimalarial Agents

Malaria is a potentially fatal disease caused by Plasmodium parasites and poses a major medical risk in large parts of the world. The development of new, affordable antimalarial drugs is of vital importance as there are increasing reports of resistance to the currently available therapeutics. In addition, most of the current drugs used for chemoprophylaxis merely act on parasites already replicating in the blood. At this point, a patient might already be suffering from the symptoms associated with the disease and could additionally be infectious to an Anopheles mosquito. These insects act as a vector, subsequently spreading the disease to other humans. In order to cure not only malaria but prevent transmission as well, a drug must target both the blood‐ and pre‐erythrocytic liver stages of the parasite. P. falciparum (Pf) enoyl acyl carrier protein (ACP) reductase (ENR) is a key enzyme of plasmodial type II fatty acid biosynthesis (FAS II). It has been shown to be essential for liver‐stage development of Plasmodium berghei and is therefore qualified as a target for true causal chemoprophylaxis. Using virtual screening based on two crystal structures of PfENR, we identified a structurally novel class of FAS inhibitors. Subsequent chemical optimization yielded two compounds that are effective against multiple stages of the malaria parasite. These two most promising derivatives were found to inhibit blood‐stage parasite growth with IC₅₀ values of 1.7 and 3.0 μM and lead to a more prominent developmental attenuation of liver‐stage parasites than the gold‐standard drug, primaquine.     

Melt processing and characterization of polyvinyl alcohol and polyhydroxyalkanoate multilayer films

Multilayer films for food packaging applications composed of polyvinyl alcohol (PVOH) as the core layer and polyhydroxyalkanoate (PHA) as the outer skin layers were produced by the co‐extrusion process. Rheological properties of PVOH and PHA were performed and analyzed before co‐extruding into a cast film. Analysis of the rheological data indicated the processing temperatures and grades of the PVOH and PHA polymers that would produce similar viscosity and melt flow properties. To improve adhesion of the layers, PHA was grafted with maleic anhydride using a dicumyl peroxide initiator to provide a tie layer material, which improved the peel strength of the PHA and PVOH layers by over 2×. Oxygen transmission rate (OTR) testing showed that the multilayer sample provided an OTR of 27 cc/m²‐day at 0% relative humidity (RH) and rates of 41 and 52 cc/m²‐day at relative humidity values of 60% and 90% RH, respectively. This indicates significant barrier performance enhancement over monolayer PVOH that provided an OTR of 60 cc/m²‐day at 0% RH and 999 cc/m²‐day at 60% RH. Biodegradation testing of the films in the marine environment showed that both the unmodified and maleated PHA polymers displayed high levels of mineralization, whereas the PVOH material did not. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Impact behavior and modeling of engineering polymers

Because of their many unique and desirable properties, engineering polymers have increasingly been applied in applications where impact behavior is of primary concern. In this paper, the impact behavior of a glassy polymer acrylonitrile‐butadiene‐styrene (ABS) and a semicrystalline polymer alloy of polycarbonate and polybutylene‐terephthalates (PBT) are obtained as a function of impact velocity and temperature from the standard ASTM D3763 multiaxial impact test. As computer simulation of destructive impact events requires two material models, a constitutive model and a failure model, uniaxial mechanical tests of the two polymers are carried out to obtain true stress vs, true strain curves at various temperatures and strain rates. The generalized DSGZ constitutive model, previously developed by the authors to uniformly describe the entire range of deformation behavior of glassy and semicrystalline polymers for any monotonic loading modes, is calibrated and applied. The thermomechanical coupling phenomenon of polymers during high strain rate plastic deformation is considered and modeled. A failure criterion based on maximum plastic strain is proposed. Finally, the generalized DSGZ model, the thermomechanical coupling model, and the failure criterion are integrated into the commercial finite element analysis package ABAQUS/Explicit through a user material subroutine to simulate the multiaxial impact behavior of the two polymers ABS and PBT. Impact load vs. striker displacement curves and impact energy vs. striker displacement curves from computer simulation are compared with multiaxial impact test data and were found to be in good agreement.     

髋关节整体替代陶瓷材料

许多材料在医学领域应用广泛,例如,整体替换硬组织或软组织的元件(如骨盆、骨头、关节、植牙等)、修补、诊断或矫正仪器(如起搏器、心脏阀等)。这些材料不仅要有好的力学性能,还要保持长期稳定,不能与人体相排斥。由于陶瓷材料在生理环境中具有强度高、生物相容性强和稳定性好的优点,人们研究用陶瓷材料替换骨骼。从20 世纪70 年代起,欧洲人用陶瓷组件置换整个髋关节。这些组件主要由氧化铝和氧化锆单体制成。然而,在有水环境中,氧化锆会发生低温降解。目前人们的研究重点在于提高陶瓷组件的强度和耐磨性,同时缩小其尺寸并延长其使用寿命。研究中使用的材料是氧化锆增韧的氧化铝复合陶瓷和其它氧化铝复合陶瓷,不再是单体陶瓷。另外,还可以使用氧化铝和氧化锆功能梯度复合材料。该梯度材料可以利用电泳沉积法(EPD)制得,其表面为纯氧化铝,中心部分为均匀的氧化铝、氧化锆复合材料,中间过渡部分是呈连续梯度渐变的氧化铝、氧化锆复合材料,烧成后会产生剩余热应力。设计这样的梯度结构是为了使复合材料具有最大表面压应力和最小内部张应力,与纯氧化铝组件相比,提高了强度和耐磨性。