Solution‐Processed GaSe Nanoflake‐Based Films for Photoelectrochemical Water Splitting and Photoelectrochemical‐Type Photodetectors

Gallium selenide (GaSe) is a layered compound, which has been exploited in nonlinear optical applications and photodetectors due to its anisotropic structure and pseudodirect optical gap. Theoretical studies predict that its 2D form is a potential photocatalyst for water splitting reactions. Herein, the photoelectrochemical (PEC) characterization of GaSe nanoflakes (single‐/few‐layer flakes), produced via liquid phase exfoliation, for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in both acidic and alkaline media is reported. In 0.5 m H₂SO₄, the GaSe photoelectrodes display the best PEC performance, corresponding to a ratiometric power‐saved metric for HER (Φ_saved,HER) of 0.09% and a ratiometric power‐saved metric for OER (Φ_saved,OER) of 0.25%. When used as PEC‐type photodetectors, GaSe photoelectrodes show a responsivity of ≈0.16 A W^?1 upon 455 nm illumination at a light intensity of 63.5 µW cm^?2 and applied potential of ?0.3 V versus reversible hydrogen electrode (RHE). Stability tests of GaSe photodetectors demonstrated a durable operation over tens of cathodic linear sweep voltammetry scans in 0.5 m H₂SO₄ for HER. In contrast, degradation of photoelectrodes occurred in both alkaline and anodic operation due to the highly oxidizing environment and O₂‐induced (photo)oxidation effects. The results provide new insight into the PEC properties of GaSe nanoflakes for their exploitation in photoelectrocatalysis, PEC‐type photodetectors, and (bio)sensors.     

Provably-Secure Time-Bound Hierarchical Key Assignment Schemes

A time-bound hierarchical key assignment scheme is a method to assign time-dependent encryption keys to a set of classes in a partially ordered hierarchy, in such a way that each class can compute the keys of all classes lower down in the hierarchy, according to temporal constraints.     

Monomolecular and Bimolecular Recombination of Electron–Hole Pairs at the Interface of a Bilayer Organic Solar Cell

While it has been argued that field‐dependent geminate pair recombination (GR) is important, this process is often disregarded when analyzing the recombination kinetics in bulk heterojunction organic solar cells (OSCs). To differentiate between the contributions of GR and nongeminate recombination (NGR) the authors study bilayer OSCs using either a PCDTBT‐type polymer layer with a thickness from 14 to 66 nm or a 60 nm thick p‐DTS(FBTTh₂)₂ layer as donor material and C₆₀ as acceptor. The authors measure JV‐characteristics as a function of intensity and charge‐extraction‐by‐linearly‐increasing‐voltage‐type hole mobilities. The experiments have been complemented by Monte Carlo simulations. The authors find that fill factor (FF) decreases with increasing donor layer thickness (L_p) even at the lowest light intensities where geminate recombination dominates. The authors interpret this in terms of thickness dependent back diffusion of holes toward their siblings at the donor–acceptor interface that are already beyond the Langevin capture sphere rather than to charge accumulation at the donor–acceptor interface. This effect is absent in the p‐DTS(FBTTh₂)₂ diode in which the hole mobility is by two orders of magnitude higher. At higher light intensities, NGR occurs as evidenced by the evolution of s‐shape of the JV‐curves and the concomitant additional decrease of the FF with increasing layer thickness.     

A Novel Switched Parasitic Array and Diversity Scheme Using Horizontally Polarized Linear Antennas

Switched Parasitic Arrays (SPAs) are proposed as an attractive alternative to fully adaptive arrays, due to their compact size and significantly lower cost of development. The main concept of SPAs is the deployment of switches on parasitic elements, which can be properly adjusted, in order to effectively control the radiation pattern of one active element. Conventional SPAs consist of circular arrays of vertically polarized dipoles and parasitic elements. In this paper, a novel SPA design is proposed, which is based on multiple switches employed on the body of horizontally polarized elements (one active and two parasitics). Design considerations are discussed and numerical results are illustrated. Furthermore, a simple diversity scheme is proposed, based on the novel SPA design. Superior performance of the proposed array, relative to simple non-diversity reception schemes, is indicated by simulation results. Stelios A. Mitilineos was born in Athens, Greece, in 1977. He received the Diploma in electrical and computer engineering from the National Technical University of Athens (NTUA), Greece, in October 2001. He is currently working towards his Ph.D. degree in electrical engineering at the same university. His research interests include antennas and propagation, smart antennas and mobile communications, channel estimation and location detection algorithms, MIMO systems and microwave components. Anna E. Andreoudi was born in Thessalonica, Greece, in 1977. She received the Diploma in electrical and computer engineering from the National Technical University of Athens, in 2004. Her research interests include electromagnetic waves propagation and scattering, antenna design and adaptive arrays, wireless communications and wireless mobile networks. Christos N. Capsalis was born in Nafplion, Greece in 1956. He received the Diploma in electrical and mechanical engineering from the National Technical University of Athens in 1979 and the B.S. degree in economics from the University of Athens in 1983. He obtained the Ph.D. degree in electrical engineering from NTUA in 1985. He is currently a Professor at the department of Electrical and Computer Engineering in NTUA. His current scientific activity concerns satellite and mobile communications, antenna theory and design, and electromagnetic compatibility.     

Photolithographic patterning of organic photodetectors with a non-fluorinated photoresist system

We report on the fabrication of organic photodetectors (OPD) based on isolated islands of P3HT:PCBM. Pattern transfer to the active material was done with photolithography based on non-fluorinated solvents and the excessive organic semiconductor was removed with oxygen plasma reactive ion etching. The photoresist system used was found to be benign to the P3HT:PCBM layer as confirmed by absorption, thickness and roughness measurements. Current–voltage characteristics and external quantum efficiency (EQE) remained unchanged after the patterning process. It was demonstrated that it is possible to photolithographically pattern isolated islands with 200 μm edge length with the same dark current density (<10⁻⁵ A/cm² at −2 V bias voltage) and photocurrent density (>5 × 10⁻³ A/cm² at −2 V). Furthermore, concerning the solar cell performance, the patterned, small-area devices showed power conversion efficiency of 2.1% and fill-factor of 60%. Dark current was observed to depend on the size of the remaining semiconductor island, which was demonstrated on OPDs with diameter of 50 μm. The presented results show the feasibility of fabrication of isolated devices based on organic semiconductors patterned with non-fluorinated photolithography.     

Evolving Fuzzy Modeling for MANETs Using Lightweight Online Unsupervised Learning

The study presents a methodology for evolving fuzzy modeling tasks in Mobile Ad hoc Networks (MANETs) based on distributed data-driven fuzzy clustering and reasoning. The fuzzy clustering is exploited for the purpose of learning fuzzy inference rules online. That calls for one-pass Lightweight Evolving Fuzzy Clustering Method (LEFCM) suitable for deploying on mobile devices with constrained resources in MANETs. There is no standard method to determine the optimal number of fuzzy rules and most of the fuzzy systems still apply the trial and error method, unsuitable for online modeling tasks. The proposed methodology addresses the issues of uncertainties, simplicity and speed to run in non-intrusive way. It estimates online the number of clusters and their centers in the input data space, accordingly the fuzzy rules, by online adaptation of the LEFCM threshold value that affects the number of clusters. Adaptation is based on the combination of geometrical and statistical analyses, as well as on incorporating a multidimensional fuzzy membership degree into the clustering process. The proposed LEFCM is proven by using traditional cluster validity indexes and tested on real data sets.     

Polyesters containing sulfur. I. Products of melt polycondensation of diphenylmethane-4,4′-di(methylthioacetic acid) with some diols

Several new polyesters containing sulfur in the main chain were obtained by melt polycondensation of diphenylmethane-4,4′-di(methylthioacetic acid) with ethanediol, 1,3-propane diol, 1,4-butanediol, 1,5-pentenediol, 1,6-hexanediol, 1,2-propanediol, and 2,2′-oxydiethanol. The structure of all polyesters was determined from elemental analysis and infrared (IR) spectra. Yield, reduced viscosity, molecular weight, and softening temperature for reaction products have been found. Initial decomposition and initial intensive decomposition temperature were defined from the curves of thermogravimetric analysis.     

Reduced adipose 18∶3ω3 with weight loss by very low calorie dieting

The human undergoing rapid and sustained weight loss by very low calorie dieting (VLCD) derives the majority of daily energy needs from adipose fatty acids. To evaluate the rates of metabolic utilization of individual fatty acids in humans, two groups of adult women outpatients were studied during major weight loss by VLCD. The diets used were either food or formula, providing the recommended dietary allowance for minerals and vitamins, with fat contents of 2–20 g/d. Group 1 consisted of 10 subjects [initial body mass index (BMI) 32.7, 157% of ideal body weight (IBW)] with a mean loss of 17.7 kg in 3–5 months. Group 2 consisted of 14 subjects (initial BMI 36.7, 167% of IBW) with a mean loss of 25.6 kg in 4–5 months. Adipose tissue biopsies were obtained by needle aspiration from Group 1 before and after weight loss and from Group 2 before, at the midpoint, and after weight loss. With weight loss in Group 1, the adipose tissue content of 18∶1ω9, 18∶2ω6, and 20∶4ω6 did not change, but 18∶3ω3 fell (0.67 to 0.56 wt%, p<0.0001) as did 20∶5ω3 (0.08 to 0.05, p<0.01). Adipose tissue 22∶6ω3 rose from 0.03 to 0.07 (p<0.01). In Group 2, only 18∶3ω3 showed a change, falling from 0.71 to 0.69 to 0.59 wt% across weight loss (p=0.03 by analysis of variance). We conclude that the major fatty acids are oxidized in proportion to their composition in adipose triglyceride. The significant reduction in the concentration of 18∶3ω3 during weight loss is unique among fatty acids. Its accelerated removal from adipose tissue indicates either a preferential step in β-oxidation or a defined need during supplemented fasting which exceeds its rate of provision from adipose stores. This work was presented in part at the Annual Meeting of the American Society for Clinical Nutrition, Washington, D.C., 1988.     

A System Reliability Model with Classes of Failures

This paper presents an approach to system reliability involving s-dependence of the workload as well as the system configuration. Four classes of failures are described and then incorporated into the workload model. Mean time to failure and the system reliability are the functions of parameters estimated by monitoring a real system. The model allows multiple classes of users and priority requests to be represented. The model is validated using measurement data collected in an IBM installation.