Eco-Sustainable Silk Fibroin/Pomegranate Peel Extract Film as an Innovative Green Material for Skin Repair

Skin disorders are widespread around the world, affecting people of all ages, and oxidative stress represents one of the main causes of alteration in the normal physiological parameters of skin cells. In this work, we combined a natural protein, fibroin, with antioxidant compounds extracted in water from pomegranate waste. We demonstrate the effective and facile fabrication of bioactive and eco-sustainable films of potential interest for skin repair. The blended films are visually transparent (around 90%); flexible; stable in physiological conditions and in the presence of trypsin for 12 days; able to release the bioactive compounds in a controlled manner; based on Fickian diffusion; and biocompatible towards the main skin cells, keratinocytes and fibroblasts. Furthermore, reactive oxygen species (ROS) production tests demonstrated the high capacity of our films to reduce the oxidative stress induced in cells, which is responsible for various skin diseases.     

Light Triggers the Antiproliferative Activity of Naphthalimide-Conjugated (η6-arene)ruthenium(II) Complexes

We report the synthesis and characterization of three half-sandwich Ru(II) arene complexes [(η⁶-arene)Ru(N,N′)L][PF₆]₂ containing arene = p-cymene, N,N′ = bipyridine, and L = pyridine meta- with methylenenaphthalimide (C1), methylene(nitro)naphthalimide (C2), or methylene(piperidinyl)naphthalimide (C3). The naphthalimide acts as an antenna for photoactivation. After 3 h of irradiation with blue light, the monodentate pyridyl ligand had almost completely dissociated from complex C3, which contains an electron donor on the naphthalimide ring, whereas only 50% dissociation was observed for C1 and C2. This correlates with the lower wavelength and strong absorption of C3 in this region of the spectrum (λ_max = 418 nm) compared with C1 and C2 (λ_max = 324 and 323 nm, respectively). All the complexes were relatively non-toxic towards A549 human lung cancer cells in the dark, but only complex C3 exhibited good photocytoxicity towards these cancer cells upon irradiation with blue light (IC₅₀ = 10.55 ± 0.30 μM). Complex C3 has the potential for use in photoactivated chemotherapy (PACT).     

Two milling time regimes in the evolution of magnetic anisotropy of mechanically alloyed soft magnetic powders

The milling time evolution of magnetic anisotropy of ball milled powders can be described considering two regimes. First, for short milling times, the main factor affecting the magnetic behavior of the alloy is the accumulation of internal stresses. Second, for long milling times, magnetic anisotropy can be explained using three contributions: long-range magnetoelastic, averaged short-range magnetoelastic and averaged magnetocrystalline anisotropies.     

White Electroluminescence by Supramolecular Control of Energy Transfer in Blends of Organic‐Soluble Encapsulated Polyfluorenes

Here, it is demonstrated that energy transfer in a blend of semiconducting polymers can be strongly reduced by non‐covalent encapsulation of one constituent, ensured by threading of the conjugated strands into functionalized cyclodextrins. Such macrocycles control the minimum intermolecular distance of chromophores with similar alignment, at the nanoscale, and therefore the relevant energy transfer rates, thus enabling fabrication of white‐light‐emitting diodes (CIE coordinates: x = 0.282, y = 0.336). In particular, white electroluminescence in a binary blend of a blue‐emitting, organic‐soluble rotaxane based on a polyfluorene derivative and the green‐emitting poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole ( F8BT ) is achieved. Morphological and structural analyses by atomic force microscopy, fluorescence mapping, µ‐Raman, and fluorescence lifetime microscopy are used to complement optical and electroluminescence characterization, and to enable a deeper insight into the properties of the novel blend.     

Noninvasive ECG as a tool for predicting termination of paroxysmal atrial fibrillation

Atrial fibrillation (AF) is the most common cardiac arrhythmia and entails an increased risk of thromboembolic events. Prediction of the termination of an AF episode, based on noninvasive techniques, can benefit patients, doctors and health systems. The method described in this paper is based on two-lead surface electrocardiograms (ECGs): 1-min ECG recordings of AF episodes including N-type (not terminating within an hour after the end of the record), S-type (terminating 1 min after the end of the record) and T-type (terminating immediately after the end of the record). These records are organised into three learning sets (N, S and T) and two test sets (A and B). Starting from these ECGs, the atrial and ventricular activities were separated using beat classification and class averaged beat subtraction, followed by the evaluation of seven parameters representing atrial or ventricular activity. Stepwise discriminant analysis selected the set including dominant atrial frequency (DAF, index of atrial activity) and average HR (HRmean, index of ventricular activity) as optimal for discrimination between N/T-type episodes. The linear classifier, estimated on the 20 cases of the N and T learning sets, provided a performance of 90% on the 30 cases of a test set for the N/T-type discrimination. The same classifier led to correct classification in 89% of the 46 cases for N/S-type discrimination. The method has shown good results and seems to be suitable for clinical application, although a larger dataset would be very useful for improvement and validation of the algorithms and the development of an earlier predictor of paroxysmal AF spontaneous termination time.     

Millimeter wave inductive post filters,theory and results

This paper briefly details the work carried out on the modelling of inductive post filters. This type of filter approach is particularly attractive at millimeter wave frequencies due to its ease of manufacture, however for modelling no true wide band equivalent circuit would seem to be available. In order to overcome this limitation we have developed a rigorous wide band model. The accuracy of the model has been confirmed by numerous experimental measurements and the resulting computer program quickly enables both analysis and synthesis to be carried out. The speed and efficiency of this approach has allowed the effect of mechanical tolerances to be taken into account, thus reducing cost, complexity and assembly times.     

Power consumption reduction through elastic data rate adaptation in survivable multi-layer optical networks

Network survivability requires the provisioning of backup resources in order to protect active traffic against any failure scenario. Backup resources, however, can remain unused most of the time while the network is not in failure condition, inducing high power consumption wastage, if fully powered on. In this paper, we highlight the power consumption wastage of the additional resources for survivability in IP/multi-protocol label switching (MPLS) over dense wavelength division multiplexing multi-layer optical networks. We assume MPLS protection switching as the failure recovery mechanism in the network, a solution interesting for current network operators to ensure fast recovery as well as fine-grained recovery treatment per label switched path. Next, we quantitatively show how elastic optical technologies can effectively reduce such a power consumption by dynamically adjusting the data rate of the transponders to the carried amount of traffic.     

Silicon planar technology for single-photon optical detectors

Design and fabrication of single photon avalanche detector (SPAD) in planar technology is reported. Device design and critical issues in the technology are discussed. Experimental test procedures are described for dark-counting rate, afterpulsing probability, photon timing resolution, and quantum detection efficiency. Low-noise detectors are obtained, with dark counting rates down to 10 c/s for devices with 10 /spl mu/m diameter, down to 1 kc/s for 50 /spl mu/m diameter. The technology is suitable for monolithic integration of SPAD detectors and associated circuits.     

Excellent Intrinsic Long-Term Thermal Stability of Co-Evaporated MAPbI3 Solar Cells at 85 °C

Thermal stability is a critical criterion for assessing the long-term stability of perovskite solar cells (PSCs). Here, it is shown that un-encapsulated co-evaporated MAPbI₃ (TE_MAPbI₃) PSCs demonstrate remarkable thermal stability even in an n-i-p structure that employs Spiro-OMeTAD as hole transport material (HTM). TE_MAPbI₃ PSCs maintain over ≈95% and ≈80% of their initial power conversion efficiency (PCE) after 1000 and 3600 h respectively under continuous thermal aging at 85 °C. TE_MAPbI₃ PSCs demonstrate remarkable structural robustness, absence of pinholes, or significant variation in grain sizes, and intact interfaces with the HTM, upon prolonged thermal aging. Here, the main factors driving TE_MAPbI₃ stability are assessed. It is demonstrated that the excellent TE_MAPbI₃ thermal stability is related to the perovskite growth process leading to a compact and almost strain-stress-free film. On the other hand, un-encapsulated PSCs with the same architecture, but incorporating solution-processed MAPbI₃ or Cs_0.05(MA_0.17FA_0.83)_0.95Pb(I_0.83Br_0.17)₃ as active layers, show a complete PCE degradation after 500 h under the same thermal aging condition. These results highlight that the control of the perovskite growth process can substantially enhance the PSCs thermal stability, besides the chemical composition. The TE_MAPbI₃ impressive long-term thermal stability features the potential for field-operating conditions.